Hardenable martensitic stainless steel
with N addition
Material number:
1.4057
Standard DIN:
X 17 CrNi 16-2
Fusion:
VIM + Micro-Melt®Powder metallurgy
Machinability:
satisfactory
Hardening capability:
up to 52-55 HRc
Polishing ability:
very well adapted for mirror polishing
Corrosion resistance:
up to good in the hardened, polished
and passivized condition
Magnetism:
magnetic
Uses:
medical, surgical and dental
instruments
The hardenable stainless CHRONIFER M-15 X (431 (X) is produced by a special powder metallurgic technology.
This technique allows a significant improvement of the properties of the steel.
Properties of 431 (X) F-899 micro melt Medical steel
431 (X) has a very fine microstructure and homogeneity, resulting in good processability, wear resistance and excellent polishing and corrosion resistance. With this outstanding characteristics of CHRONIFER M-15X, the rejection rate in the production of finished parts is reduced, thus the needed material for the production is also lower.
Applications of 431 (X) F-899 micro melt
M-15 X meets the high quality requirements that are imposed on instruments in the medical and in the dental industry.
Its excellent hardenability, ductility and corrosion resistance ensures the manufacturing of precise, wear-resistant parts for this sector.
In medical engineering the steel is used for the production of gear parts, rotating instruments, surgical instruments like pliers, pincers or scissors, in the dental industry drills, gear parts for rotating instruments and more are manufactured from this material.
Chronifer M 15 X
no. 1.4057, X17CrNi16 2, AISI 431
premium grade,hardenable stainless
a powder metallurgy product
as per ASTM F-899, NF S94-090,
annealed, wrought, ground, polished
in 3m bars (+30/0mm)
100% eddy current crack tested
diam. 5.10 mm, tolerance +/-0.038 mm
bars 3m
ground
spec.
0 kg
800
0
5-100
bars-3m
ground
spec-en
6.100
45513806100
Chronifer M 15 X
no. 1.4057, X17CrNi16 2, AISI 431
premium grade,hardenable stainless
a powder metallurgy product
as per ASTM F-899, NF S94-090,
and AMS5628 rev. F
annealed, wrought, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% eddy current crack tested
diam. 6.10 mm, tolerance +/-0.038 mm
Chronifer M 15 X
no. 1.4057, X17CrNi16 2, AISI 431
as per ASTM F-899 + NF S94-090,
premium grade,hardenable stainless
a powder metallurgy product
annealed, wrought, ground, polished
in 3m bars (+30/0mm)
100% eddy current crack tested
end of bars: pointed, chamfered
diam. 8.10 mm, tolerance +/-0.038 mm
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
prem. grade, hardenable stainless steel
a powder metallurgy product
as per ASTM F-899, NF S94-090
ground, polished, tempered at 47-49 HRC
in 3m bars (+30/0mm)
end of bars: pointed, chamfered
diam. 4.50 mm, tolerance ISO h5
bars 3m
ground
spec.
0 kg
0
0
4-500
bars-3m
ground
spec-en
4.600
45513804600
Chronifer M 15 X
German no 1.4057, X17CrNi16 2, Aisi 431
premium grade,hardenable stainless
a powder metallurgy product
as per ASTM F-899-20, NFS 94-090 (chem.)
annealed,wrought,ground,polished,
in 3m lengths (+30/0mm)
end of bars: pointed, chamfered
diam. 4.60 mm, tolerance +/-0.025 mm
bars 3m
ground
spec.
321 kg
0
220 923 - 85.000|091 123 - 236.000
4-600
bars-3m
ground
spec-en
3.600
45513803600
Chronifer M 15 X
German no 1.4057, X17CrNi16 2, Aisi 431
premium grade,hardenable stainless
a powder metallurgy product
as per ASTM F-899, NFS 94-090,
annealed, cold worked, ground
in 3m lengths (+30/0mm)
pointed and chamfered
diam. 3.60 mm, tolerance +/-0.025 mm
bars 3m
ground
spec.
599 kg
0
260 911 - 188.600|280 515 - 410.000
3-600
bars-3m
ground
spec-en
7.100
45513807100
Chronifer M 15 X
German no 1.4057, X17CrNi16 2, Aisi 431
premium grade,hardenable stainless
a powder metallurgy product
as per ASTM F-899, NFS 94-090,
annealed, wrought, ground, polished,
in 3m bars (+30/0mm)
100% eddy current crack tested
diam. 7.10 mm, tolerance +/-0.038 mm
bars 3m
ground
spec.
498 kg
0
250 612 - 497.985
7-100
bars-3m
ground
spec-en
9.100
45513809100
Chronifer M 15 X
German no 1.4057, X17CrNi16 2, AISI 431
premium grade,hardenable stainless
a powder metallurgy product
as per ASTM F-899-12B, NFS 94-090,
annealed, drawn, ground, polished,
in 3m lengths (+30/0mm)
100% eddy current crack tested
ultrasonic inspected pe AMS 2632 cl. A
diam. 9.10 mm, tolerance +/-0.038 mm
bars 3m
ground
spec.
509 kg
0
300 418 - 509.000
9-100
bars-3m
ground
spec-en
10.200
45513810200
Chronifer M 15 X
German no 1.4057, X17CrNi16 2, Aisi 431
premium grade,hardenable stainless
a powder metallurgy product
as per ASTM F-899, NFS 94-090,
annealed,wrought,ground,polished,
in 3m lengths (+30/0mm)
100% eddy current crack tested
diam. 10.20 mm, tolerance +/-0.038 mm
bars 3m
ground
spec.
115 kg
0
230 518 - 115.300
10-200
bars-3m
ground
spec-en
12.200
45513812200
Chronifer M 15 X
German no 1.4057, X17CrNi16 2,
AISI 431 micro-melt
as per ASTM F-899, NFS 94-090 (chem.)
premium grade,hardenable stainless
a powder metallurgy product
annealed,wrought, ground, polished,
in 3m lengths (+30/0mm)
end of bars: pointed, chamfered
100% ultrasonic inspected
diam. 12.20 mm, tolerance +/-0.038 mm
bars 3m
ground
spec.
514 kg
0
020 919 - 514.000
12-200
bars-3m
ground
spec-en
2.800
45500802800
Chronifer M 15 X
German no 1.4057, X17CrNi16 2, AISI 431
premium grade,hardenable stainless
a powder metallurgy product, ferrite free
as per ASTM F-899-10, NF S94-090,
annealed, (8% skinpass for redrawer)
oily surface, finish: Ra 0.2my aim
in coils of 200 +/-50 kg
inner diam. 600-1000mm, ext. 710-1400mm
diam. 2.80 mm, tolerance +/-0.025 mm
in spools
drawn
spec.
630 kg
0
270 711 - 143.600|211 116 - 486.000
2-800
in-spools
drawn
spec-en
1.400
45500301400
Chronifer M 15 X
German no 1.4057, X17CrNi16 2, Aisi 431
premium grade,hardenable stainless
a powder metallurgy product
as per ASTM F-899-07, NFS 94-090,
and as per AMS 5628 rev F (10/06)
annealed, (8% skinpass for redrawer)
on spool
diam. 1.40 mm, tolerance ISO h9
in spools
drawn
h 9
80 kg
0
151 209 - 79.600
1-400
in-spools
drawn
h-9-en
5.200
45513805200
Chronifer M 15 X
German no 1.405, X17CrNi16 2, AISI 431
premium grade, hardenable stainless
a powder metallurgy product
as per ASTM F-899-12B, NF S94-090,
cold worked, ground, in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% eddy current crack tested
diam. 5.20 mm, tolerance +/-0.025 mm
bars 3m
ground
spec.
258 kg
0
140 415 - 258.400
5-200
bars-3m
ground
spec-en
6.350
45513806350
Chronifer M 15 X
German no 1.4057, X17CrNi16 2, AISI 431
premium grade,hardenable stainless
a powder metallurgy product
as per ASTM F-899, NF S94-090,
and AMS5628 rev. F
annealed, wrought, ground, polished,
in 3m lengths (+30/0mm)
end of bars: pointed, chamfered
100% eddy current crack tested
diam. 6.35 mm (1/4”), tolerance +/-0.038 mm
bars 3m
ground
spec.
998 kg
0
230 312 - 66.430|250 523 - 932.000
6-350
bars-3m
ground
spec-en
6.500
45513806500
Chronifer M 15 X
German no 1.4057, X17CrNi16 2, AISI 431
premium grade,hardenable stainless
a powder metallurgy product
as per ASTM F-899-20
NF S94-090 (chem. only)
annealed,wrought,ground,polished,
in 3m lengths (+30/0mm)
end of bars: pointed, chamfered
100% eddy current crack tested
diam. 6.50 mm, tolernace +/-0.038mm
bars 3m
ground
spec.
824 kg
0
111 022 - 412.760|181 122 - 411.000
6-500
bars-3m
ground
spec-en
2.100
45503802100
Chronifer M 15 X
no 1.4057, X17CrNi16 2, AISI 431
prem. grade, hardenable stainless steel
a powder metallurgy product
as per ASTM F-899, NF S94-090
and AMS5628 rev. F
annealed, drawn, in 3m bars
pointed/chamfered
diam. 2.10 mm, tolerance +/-0.025 mm
bars 3m
drawn
spec.
204 kg
0
271 113 - 204.000
2-100
bars-3m
drawn
spec-en
2.000
45500802000
Chronifer M 15 X
German no 1.4057,X17CrNi16 2, AISI 431
premium grade,hardenable stainless
a powder metallurgy product, ferrite free
as per ASTM F-899-10, NF S94-090,
and as per AMS 5628 rev F (10/06)
annealed, (8% skinpass for redrawer)
hardness < 285HB
oily surface, finish: Ra 0.2my aim
in coils of 200 +/-50 kg
inner Dia. 600-1000mm, ext. 710-1400mm
diam. 2.00 mm, +/-0.025mm
in spools
drawn
spec.
385 kg
0
211 013 - 385.000
2-000
in-spools
drawn
spec-en
7.000
455138070002
Chronifer M 15 X
no 1.4057, X17CrNi16 2, AISI 431
prem. grade, hardenable stainless steel
a powder metallurgy product
as per ASTM F-899, NF S94-090
hardened, tempered to 50-54HRC
ground, polished, in 3m bars (+30/0mm)
end of bars: pointed and chamfered
100% eddy current crack tested
diam. 7.00 mm, tolerance ISO k6
bars 3m
ground
spec.
26 kg
0
150 711 - 25.991
7-000
bars-3m
ground
spec-en
14.000
45513814000
Chronifer M 15 X
German no 1.4057, X17CrNi16 2, Aisi 431
premium grade,hardenable stainless
a powder metallurgy product
as per ASTM F-899, NFS 94-090,
annealed,ground,polished,
in 3m lengths (+30/0mm)
100% eddy current + US crack tested
diam. 14.00 mm, tolerance +/-0.050mm
bars 3m
ground
spec.
936 kg
0
250 612 - 936.400
14-000
bars-3m
ground
spec-en
13.000
45513813000
Chronifer M 15 X
German no 1.4057, X17CrNi16 2, AISI 431
premium grade,hardenable stainless
a powder metallurgy product
as per ASTM F-899, NF S94-090 (chem.)
annealed,ground,polished,
in 3m lengths (+30/0mm)
100% eddy current + US crack tested
end of bars: pointed, chamfered
diam. 13.00 mm, tolerance +/-0.038mm
bars 3m
ground
spec.
343 kg
1018
180 612 - 342.750
13-000
bars-3m
ground
spec-en
15.000
45513815000
Chronifer M 15 X
German no 1.4057, X17CrNi16 2, Aisi 431
premium grade,hardenable stainless
a powder metallurgy product
as per ASTM F-899, NFS 94-090,
annealed, ground, polished, (HB < 285)
in 3m lengths (+30/0mm)
100% eddy current + US crack tested
diam. 15.00 mm, tolerance +/-0.050 mm
bars 3m
ground
spec.
280 kg
0
250 612 - 280.000
15-000
bars-3m
ground
spec-en
16.000
45513816000
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
premium grade,hardenable stainless
a powder metallurgy product
as per ASTM F-899, NFS 94-090,
annealed, ground, polished,
in 3m lengths (+30/0mm)
end of bars: pointed, chamfered
100% eddy current + US crack tested
diam. 16.00 mm, tolerance +/-0.050 mm
bars 3m
ground
spec.
170 kg
0
180 612 - 169.950
16-000
bars-3m
ground
spec-en
6.000
455130060001
Chronifer M 15 X
German no 1.4057, X17CrNi16 2, Aisi 431
premium grade, hardenable stainless
a powder metallurgy product
as per ASTM F-899, NF S94-090,
and AMS5628 rev. F
annealed, wrought, ground, polished,
hardened to hardness 525-552 HV3
in 3m lengths (+30/0mm)
end of bars: pointed, chamfered
100% eddy current crack tested
diam. 6.00 mm, tolerance ISO h6
bars 3m
ground
h 6
38 kg
0
230 312 - 38.405
6-000
bars-3m
ground
h-6-en
2.200
455032022001
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
premium grade,hardenable stainless
a powder metallurgy product, ferrite free
as per ASTM F-899-10, NF S94-090,
and as per AMS 5628 rev F (10/06)
tempered 1600-1750 MPa (~52 HRC)
straightened, in 3m bars (+/-15mm)
diam. 2.20 mm, tolerance ISO h8
bars 3m
drawn
h 8
4 kg
0
270 711 - 4.000
2-200
bars-3m
drawn
h-8-en
2.700
455031027001
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
premium grade,hardenable stainless
a powder metallurgy product, ferrite free
as per ASTM F-899-10, NF S94-090,
and as per AMS 5628 rev F (10/06)
tempered 1600-1750 MPa (~52 HRC)
straightened, in 3m bars
diam. 2.70 mm, tolerance ISO h7
bars 3m
drawn
h 7
14 kg
0
151 209 - 13.865
2-700
bars-3m
drawn
h-7-en
6.350
455138063501
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
prem. grade, hardenable stainless steel
a powder metallurgy product
as per ASTM F-899, NF S94-090
ground, polished, eddy current tested
tempered at ~52 HRC
in 3m bars (+30/0mm)
diam. 6.35 mm, tolerance +/-0.038 mm
bars 3m
ground
spec.
1 kg
0
230 312 - 0.800
6-350
bars-3m
ground
spec-en
1.650
45500701650
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
premium grade, hardenable stainless
a powder metallurgy product
ASTM F-899-10, NF S94-090,
AMS 5628 rev F (10/06)
annealed, cold drawn, in coils
diam. 1.65 mm, tolerance ISO fg7
in spools
drawn
fg 7
36 kg
0
270 711 - 36.000
1-650
in-spools
drawn
fg-7-en
3.200
45513903200
Chronifer M 15 X
no 1.4057, X17CrNi16 2, AISI 431
as per ASTM F-899, NF S94-090
and AMS5628 rev. F
prem. grade, hardenable stainless steel
a powder metallurgy product
annealed, wrought, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed and chamfered
diam. 3.20 mm, tolerance ISO h5
bars 3m
ground
h 5
0 kg
0
0
3-200
bars-3m
ground
h-5-en
2.200
45503002200
Chronifer M 15 X
no 1.4057, X17CrNi16 2, AISI 431
as per ASTM F-899, NFS 94-090
and as per AMS 5628 rev F (10/06)
premium grade, hardenable stainless steel
a powder metallurgy product
cold worked, in 3m bars +30/0mm
end of bars: pointed and chamfered
diam. 2.20 mm, tolerance ISO h6
bars 3m
drawn
h 6
0 kg
0
0
2-200
bars-3m
drawn
h-6-en
6.200
45513906200
Chronifer M 15 X
no 1.4057, X17CrNi16 2, AISI 431
as per ASTM F-899, NF S94-090
and AMS5628 rev. F
prem. grade, hardenable stainless steel
a powder metallurgy product
annealed, wrought, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed and chamfered
100 % EC and USt crack tested
diam. 6.20 mm, tolerance ISO h5
bars 3m
ground
h 5
0 kg
0
0
6-200
bars-3m
ground
h-5-en
8.200
45513908200
Chronifer M 15 X
no 1.4057, X17CrNi16 2, AISI 431
as per ASTM F-899, NF S94-090
and AMS5628 rev. F
prem. grade, hardenable stainless steel
a powder metallurgy product
annealed, wrought, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed and chamfered
100 % EC and USt crack tested
diam. 8.20 mm, tolerance ISO h5
bars 3m
ground
h 5
0 kg
0
0
8-200
bars-3m
ground
h-5-en
1.500
45503901500
Chronifer M 15 X
no 1.4057, X17CrNi16 2, AISI 431
premium grade, hardenable stainless
a powder metallurgy product
ASTM F-899-10, NF S94-090,
AMS 5628 rev F (10/06)
annealed, cold drawn, in 3m bars
diam. 1.50 mm, tolerance ISO h5
bars 3m
drawn
h 5
21 kg
0
270 711 - 20.581
1-500
bars-3m
drawn
h-5-en
1.600
45503901600
Chronifer M 15 X
no 1.4057, X17CrNi16 2, AISI 431
premium grade, hardenable stainless
a powder metallurgy product
ASTM F-899-10, NF S94-090,
AMS 5628 rev F (10/06)
annealed, cold drawn, in 3m bars
diam. 1.60 mm, tolerance ISO h5
bars 3m
drawn
h 5
23 kg
0
270 711 - 0.510|211 013 - 22.800
1-600
bars-3m
drawn
h-5-en
1.000
45503901000
Chronifer M 15 X
no 1.4057, X17CrNi16 2, AISI 431
premium grade, hardenable stainless
a powder metallurgy product
ASTM F-899-07, NF S94-090,
AMS 5628 rev F (10/06)
annealed, cold drawn, in 3m bars
diam. 1.00 mm, tolerance ISO h5
bars 3m
drawn
h 5
15 kg
0
151 209 - 14.856
1-000
bars-3m
drawn
h-5-en
1.100
45503901100
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
premium grade, hardenable stainless
a powder metallurgy product
ASTM F-899-07, NF S94-090,
AMS 5628 rev F (10/06)
annealed, cold drawn, in 3m bars
diam. 1.10 mm, tolerance ISO h5
bars 3m
drawn
h 5
20 kg
0
151 209 - 19.818
1-100
bars-3m
drawn
h-5-en
1.200
45503901200
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
premium grade, hardenable stainless
a powder metallurgy product
ASTM F-899-07, NF S94-090,
AMS 5628 rev F (10/06)
annealed, cold drawn, in 3m bars
diam. 1.20 mm, tolerance ISO h5
bars 3m
drawn
h 5
25 kg
0
151 209 - 25.159
1-200
bars-3m
drawn
h-5-en
4.200
45513804200
Chronifer M 15 X
German no 1.4057, X17CrNi16 2,
per ASTM F-899-12B, NFS 94-090(chem.)
premium grade,hardenable stainless
a powder metallurgy product
cold worked, ground
in 3m lengths (+30/0mm)
end of bars: pointed, chamfered
diam. 4.20 mm, +/-0.038mm
bars 3m
ground
spec.
481 kg
0
191 214 - 481.400
4-200
bars-3m
ground
spec-en
2.000
45503902000
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
premium grade, hardenable stainless steel
a powder metallurgy product
as per ASTM F-899, NFS 94-090
precisely cold drawn, in 3m lengths
end of bars: chamfered
diam. 2.00 mm, tolerance ISO h5
bars 3m
drawn
h 5
4 kg
0
270 711 - 4.450
2-000
bars-3m
drawn
h-5-en
2.100
45503902100
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
prem. grade, hardenable stainless steel
a powder metallurgy product
as per ASTM F-899, NF S94-090
and AMS5628 rev. F
annealed, wrought, in 3m bars
diam. 2.10 mm, tolerance ISO h5
bars 3m
drawn
h 5
28 kg
0
151 209 - 28.400
2-100
bars-3m
drawn
h-5-en
2.350
45503902350
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
as per ASTM F-899, NFS 94-090
and as per AMS 5628 rev F (10/06)
premium grade, hardenable stainless steel
a powder metallurgy product
annealed, drawn, in 3m bars
pointed and chamfered
diam. 2.35 mm, tolerance ISO h5
bars 3m
drawn
h 5
19 kg
0
151 209 - 1.574|270 711 - 17.700
2-350
bars-3m
drawn
h-5-en
2.500
45503902500
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
premium grade, hardenable stainless steel
a powder metallurgy product
as per ASTM F-899, NFS 94-090
and as per AMS 5628 rev F (10/06)
annealed, drawn, in 3m bars
pointed and chamfered
diam. 2.50 mm, tolerance ISO h5
bars 3m
drawn
h 5
250 kg
0
151 209 - 12.532|271 117 - 237.300
2-500
bars-3m
drawn
h-5-en
2.650
45503902650
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
prem. grade, hardenable stainless steel
a powder metallurgy product
as per ASTM F-899, NF S94-090
and AMS5628 rev. F
annealed, wrought, in 3m bars
diam. 2.65 mm, tolerance ISO h5
bars 3m
drawn
h 5
33 kg
0
151 209 - 32.950
2-650
bars-3m
drawn
h-5-en
2.800
45503902800
Chronifer M 15 X
no 1.4057, X17CrNi16 2, AISI 431
as per ASTM F-899, NF S94-090
and AMS5628 rev. F
prem. grade, hardenable stainless steel
a powder metallurgy product
annealed, wrought, in 3m bars
diam. 2.80 mm, tolerance ISO h5
bars 3m
drawn
h 5
31 kg
0
151 209 - 31.254
2-800
bars-3m
drawn
h-5-en
3.000
45513903000
Chronifer M 15 X
no 1.4057, X17CrNi16 2, AISI 431
as per ASTM F-899, NF S94-090
and AMS5628 rev. F
prem. grade, hardenable stainless steel
a powder metallurgy product
annealed, wrought, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed and chamfered
diam. 3.00 mm, tolerance ISO h5
bars 3m
ground
h 5
106 kg
0
151 209 - 2.316|211 013 - 104.132
3-000
bars-3m
ground
h-5-en
12.000
45513912000
Chronifer M 15 X
German no 1.4057, X17CrNi16 2, AISI 431
as per ASTM F-899, NFS 94-090,
premium grade,hardenable stainless
a powder metallurgy product
annealed, wrought, ground, polished,
in 3m lengths (+30/0mm)
end of bars: pointed, chamfered
100% eddy current crack tested
diam. 12.00 mm, tolerance ISO h5
bars 3m
ground
h 5
383 kg
0
280 611 - 382.800
12-000
bars-3m
ground
h-5-en
3.500
45513903500
Chronifer M 15 X
no 1.4057, X17CrNi16 2, AISI 431
prem. grade, hardenable stainless steel
a powder metallurgy product
as per ASTM F-899, NF S94-090
annealed, wrought, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed and chamfered
100% eddy current crack tested
diam. 3.50 mm, tolerance ISO h5
bars 3m
ground
h 5
115 kg
0
131 109 - 0.383|260 911 - 114.200
3-500
bars-3m
ground
h-5-en
3.500
455139035001
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
prem. grade, hardenable stainless steel
a powder metallurgy product
as per ASTM F-899, NF S94-090
ground, polished, eddy current tested
tempered at ~52 HRC
in 3m bars (+30/0mm)
diam. 3.50 mm, tolerance ISO h5
bars 3m
ground
h 5
4 kg
0
260 911 - 3.920
3-500
bars-3m
ground
h-5-en
4.000
45513904000
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
prem. grade, hardenable stainless steel
a powder metallurgy product
as per ASTM F-899, NF S94-090
annealed, wrought, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed and chamfered
100% eddy current crack tested
diam. 4.00 mm, tolerance ISO h5
bars 3m
ground
h 5
185 kg
0
131 109 - 185.175
4-000
bars-3m
ground
h-5-en
4.500
45513904500
Chronifer M 15 X
German no 1.4057, X17CrNi16 2, Aisi 431
premium grade,hardenable stainless
a powder metallurgy product
as per ASTM F-899, NFS 94-090,
annealed,wrought,ground,polished,
in 3m lengths (+30/0mm)
end of bars: pointed, chamfered
100% eddy current crack tested
diam. 4.50 mm, tolerance ISO h5
bars 3m
ground
h 5
330 kg
0
120 811 - 10.524|111 213 - 319.800
4-500
bars-3m
ground
h-5-en
4.500
455139045001
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
prem. grade, hardenable stainless steel
a powder metallurgy product
as per ASTM F-899, NF S94-090
ground, polished, eddy current tested
tempered at ~52 HRC
in 3m bars (+30/0mm)
diam. 4.50 mm, tolerance ISO h5
bars 3m
ground
h 5
0 kg
0
120 811 - 0.750|301 023 - 368.500
4-500
bars-3m
ground
h-5-en
5.000
45513905000
Chronifer M 15 X
no 1.4057, X17CrNi16 2, AISI 431
prem. grade, hardenable stainless steel
a powder metallurgy product
as per ASTM F-899, NF S94-090
annealed, cold worked, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed and chamfered
100% eddy current crack tested
diam. 5.00 mm, tolerance ISO h5
bars 3m
ground
h 5
342 kg
0
190 418 - 341.565
5-000
bars-3m
ground
h-5-en
5.000
455139050001
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
prem. grade, hardenable stainless steel
a powder metallurgy product
as per ASTM F-899, NF S94-090
annealed, drawn, ground, tempered,
hardness ~51-54 HRC
in 3m bars (+30/0mm)
end of bars: pointed and chamfered
100% eddy current crack tested
diam. 5.00 mm, tolerance ISO h5
bars 3m
ground
h 5
6 kg
0
230 312 - 6.068
5-000
bars-3m
ground
h-5-en
10.000
45513910000
Chronifer M 15 X
German no 1.4057, X17CrNi16 2, Aisi 431
premium grade, hardenable stainless
a powder metallurgy product
as per ASTM F-899, NFS 94-090,
annealed, drawn, ground, polished,
in 3m lengths (+30/0mm)
end of bars: pointed, chamfered
100% eddy current crack tested
diam. 10.00 mm, tolerance ISO h5
bars 3m
ground
h 5
344 kg
0
280 611 - 343.750
10-000
bars-3m
ground
h-5-en
6.000
45513906000
Chronifer M 15 X
no 1.4057, X17CrNi16 2 ,AISI 431
as per ASTM F-899, NF S94-090
prem. grade, hardenable stainless steel
a powder metallurgy product
annealed, wrought, ground, polished
in 3m bars (+30/0mm)
100% eddy current crack tested
diam. 6.00 mm, tolerance ISO h5
bars 3m
ground
h 5
119 kg
0
170 513 - 119.065
6-000
bars-3m
ground
h-5-en
6.000
455139060001
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
prem. grade, hardenable stainless steel
a powder metallurgy product
as per ASTM F-899, NF S94-090
ground, polished, eddy current tested
tempered at ~52 HRC
in 3m bars (+30/0mm)
end of bars: pointed and chamfered
100% eddy current crack tested
diam. 6.00 mm, tolerance ISO h5
bars 3m
ground
h 5
6 kg
0
230 312 - 5.500
6-000
bars-3m
ground
h-5-en
7.000
45513907000
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
premium grade, hardenable stainless
a powder metallurgy product
as per ASTM F-899, NFS 94-090,
annealed, drawn, ground, polished,
in 3m bars (+30/0mm)
100% eddy current crack tested
diam. 7.00 mm, tolerance ISO h5
bars 3m
ground
h 5
414 kg
0
150 711 - 414.083
7-000
bars-3m
ground
h-5-en
8.000
45513908000
Chronifer M 15 X
no. 1.4057, X17CrNi16 2, Aisi 431
prem. grade, hardenable stainless steel
a powder metallurgy product
as per ASTM F-899, NF S94-090
annealed, drawn, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% eddy current crack tested
diam. 8.00 mm, tolerance ISO h5
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
premium grade, hardenable stainless steel
a powder metallurgy product
as per ASTM F-899, NFS 94-090
precisely cold drawn, in 2m bars
diam. 1.50 mm, tolerance ISO h5
bars 2m
drawn
h 5
3 kg
0
151 209 - 2.517
1-500
bars-2m
drawn
h-5-en
3.000
455139030001
Chronifer M 15 X
no 1.4057, X17CrNi16 2, AISI 431
prem. grade, hardenable stainless steel
a powder metallurgy product
as per ASTM F-899, NF S94-090
ground, polished, eddy current tested
tempered at ~52 HRC
in 3m bars (+30/0 mm)
diam. 3.00 mm, tolerance ISO h5
bars 3m
ground
h 5
15 kg
0
211 013 - 14.681
3-000
bars-3m
ground
h-5-en
1.700
45503901700
Chronifer M 15 X
no 1.4057, X17CrNi16 2, AISI 431
premium grade, hardenable stainless
a powder metallurgy product
ASTM F-899-10, NF S94-090,
AMS 5628 rev F (10/06)
annealed, cold drawn, in 3m bars
diam. 1.70 mm, tolerance ISO h5
bars 3m
drawn
h 5
25 kg
0
211 013 - 24.800
1-700
bars-3m
drawn
h-5-en
1.800
45503901800
Chronifer M 15 X
no 1.4057, X17CrNi16 2, AISI 431
premium grade, hardenable stainless
a powder metallurgy product
ASTM F-899-10, NF S94-090,
AMS 5628 rev F (10/06)
annealed, cold drawn, in 3m bars
diam. 1.80 mm, tolerance ISO h5
bars 3m
drawn
h 5
200 kg
0
270 711 - 17.850|050 716 - 182.200
1-800
bars-3m
drawn
h-5-en
1.650
45503101650
Chronifer M 15 X
no 1.4057, X17CrNi16 2, AISI 431
premium grade, hardenable stainless
a powder metallurgy product
ASTM F-899-10, NF S94-090,
AMS 5628 rev F (10/06)
annealed, cold drawn, in 3m bars
diam. 1.65 mm, tolerance ISO h7
bars 3m
drawn
h 7
27 kg
0
211 013 - 26.500
1-650
bars-3m
drawn
h-7-en
1.500
45500601500
Chronifer M 15 X
no 1.4057, X17CrNi16 2, AISI 431
premium grade, hardenable stainless
a powder metallurgy product
ASTM F-899-10, NF S94-090,
AMS 5628 rev F (10/06)
annealed, cold drawn, in coils
diam. 1.50 mm, tolerance ISO fg6
in spools
drawn
fg 6
67 kg
0
211 013 - 66.600
1-500
in-spools
drawn
fg-6-en
6.000
455130060003
Chronifer M 15 X
German no 1.4057, X17CrNi16 2, AISI 431
premium grade,hardenable stainless
a powder metallurgy product
as per ASTM F-899, NF S94-090,
and AMS5628 rev. F
stress-relieved, ground, polished,
in 3m lengths (+30/0mm)
end of bars: pointed, chamfered
100% eddy current crack tested
diam. 6.00 mm, tolerance ISO h6
bars 3m
ground
h 6
0 kg
0
0
6-000
bars-3m
ground
h-6-en
2.000
45500902000
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
premium grade, hardenable stainless
a powder metallurgy product, ferrite free
as per ASTM F-899, NF S94-090,
AMS 5628 rev F (10/06)
annealed, cold drawn, in coils
diam. 2.00 mm, tolerance ISO h5
in spools
drawn
h 5
6 kg
0
270 711 - 5.500
2-000
in-spools
drawn
h-5-en
2.500
455131025001
Chronifer M-15 X
no 1.4057, X17CrNi16 2
AISI 431, DIN EN 10088-3,
as per NF S94 090, ASTM F-899
stainless steel, hardenable, micro-melt
hardened to 47-49 HRC
ground, polished in 3m bars (+30/0mm)
end of bars:pointed/chamfered,
eddy current crack tested
diam. 2.50 mm, tolerance ISO h7
bars 3m
ground
h 7
85 kg
0
281 113 - 84.800
2-500
bars-3m
ground
h-7-en
15.000
455130150001
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
premium grade,hardenable stainless
a powder metallurgy product
as per ASTM F-899, NFS 94-090,
annealed, ground, polished,
in 3m lengths (+30/0mm)
end of bars: pointed, chamfered
100% eddy current + US crack tested
diam. 15.00 mm, tolerance ISO h6
bars 3m
ground
h 6
119 kg
0
180 612 - 118.600
15-000
bars-3m
ground
h-6-en
14.000
455130140001
Chronifer M 15 X
no 1.4057, X17CrNi16 2, AISI 431
premium grade,hardenable stainless
a powder metallurgy product
as per ASTM F-899, NFS 94-090,
annealed, ground, polished, (HB < 285)
in 3m lengths (+30/0mm)
end of bars: pointed, chamfered
100% eddy current + US crack tested
diam. 14.00 mm, tolerance ISO h6
bars 3m
ground
h 6
96 kg
0
250 612 - 96.100
14-000
bars-3m
ground
h-6-en
2.800
455008028001
Chronifer M 15 X
German no 1.4057, X17CrNi16 2, AISI 431
as per ASTM F-899-10, NF S94-090,
and as per AMS 5628 rev F (10/06)
premium grade,hardenable stainless
a powder metallurgy product, ferrite free
annealed, drawn, in coils (~35 kg)
diam. 2.80 mm, tolerance +/-0.025 mm
in spools
drawn
spec.
70 kg
0
270 711 - 70.300
2-800
in-spools
drawn
spec-en
12.000
455130120002
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
premium grade,hardenable stainless
a powder metallurgy product
as per ASTM F-899, NFS 94-090,
hardened and tempered at 51-54 HRC
ground, polished, in 3m bars
end of bars: pointed, chamfered
100% eddy current + US crack tested
diam. 12.00 mm, tolerance ISO h6
bars 3m
ground
h 6
107 kg
0
180 612 - 18.800|170 119 - 88.500
12-000
bars-3m
ground
h-6-en
14.000
455130140002
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
premium grade,hardenable stainless
a powder metallurgy product
as per ASTM F-899, NFS 94-090,
hardened, tempered ~52 HRC
ground, in 3m bars
end of bars: pointed, chamfered
100% eddy current + US crack tested
diam. 14.00 mm, tolerance ISO h6
bars 3m
ground
h 6
21 kg
0
250 612 - 21.000
14-000
bars-3m
ground
h-6-en
15.000
455130150002
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
premium grade,hardenable stainless
a powder metallurgy product
as per ASTM F-899, NFS 94-090,
hardened, tempered ~52 HRC
ground, in 3m bars
end of bars: pointed, chamfered
100% eddy current + US crack tested
diam. 15.00 mm, tolerance ISO h6
bars 3m
ground
h 6
20 kg
0
180 612 - 20.000
15-000
bars-3m
ground
h-6-en
8.000
455130080002
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
premium grade,hardenable stainless
a powder metallurgy product
as per ASTM F-899, NFS 94-090,
hardened, tempered ~52 HRC
ground, in 3m bars
end of bars: pointed, chamfered
100% eddy current
diam. 8.00 mm, tolerance ISO h6
bars 3m
ground
h 6
11 kg
0
230 312 - 11.120
8-000
bars-3m
ground
h-6-en
9.000
455130090002
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
premium grade,hardenable stainless
a powder metallurgy product
as per ASTM F-899, NFS 94-090,
hardened, tempered ~52 HRC
ground, in 3m bars
end of bars: pointed, chamfered
100% eddy current
diam. 9.00 mm, tolerance ISO h6
bars 3m
ground
h 6
25 kg
0
280 611 - 25.000
9-000
bars-3m
ground
h-6-en
4.000
455139040001
Chronifer M 15 X
no 1.4057, X17CrNi16 2, AISI 431
premium grade,hardenable stainless
a powder metallurgy product
as per ASTM F-899, NFS 94-090,
hardened, tempered ~52 HRC
ground, in 3m bars
end of bars: pointed, chamfered
100% eddy current crack tested
diam. 4.00 mm, tolerance ISO h5
bars 3m
ground
h 5
34 kg
0
191 214 - 33.605
4-000
bars-3m
ground
h-5-en
0.800
4552380800
Chronifer M 15 X
no 1.4057, X17CrNi16 2, AISI 431
VIM/VAR Grade, hardenable stainless steel
a powder metallurgy product
as per ASTM F-899, NF S94-090
cold rolled, in flat pieces
0.80 x 38 x 36 mm ( thk x width x length)
bars 3m
rolled
spec.
90 kg
0
030 914 - 90.000
0-800
bars-3m
rolled
spec-en
2.200
45513002200
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
as per ASTM F-899, NFS 94-090
and as per AMS 5628 rev F (10/06)
premium grade, hardenable stainless steel
a powder metallurgy product
cold drawn, ground polished
in 3m bars (+30/0mm), pointed end
diam. 2.20 mm, tolerance ISO h6
bars 3m
ground
h 6
0 kg
0
0
2-200
bars-3m
ground
h-6-en
0.800
45523808001
Chronifer M 15 X
no 1.4057, X17CrNi16 2, AISI 431
VIM/VAR Grade, hardenable stainless steel
a powder metallurgy product
as per ASTM F-899, NF S94-090
cold rolled, in flat pieces
0.80 x 20 x 35 mm ( thk x width x length)
bars 3m
rolled
spec.
600 kg
0
309 140 - 600.000
0-800
bars-3m
rolled
spec-en
0.000
45577800000
Chronifer M 15 X P
AISI 431 – Micro Melt
hardenable stainless steel
spherical powder, 10-45my (+10my)/-325Mesh)
in ca. 5 kg plastic bottles
powder
powder
spec.
100 kg
0
280 119 - 99.791
0-000
powder
powder
spec-en
2.200
45503902200
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
as per ASTM F-899, NFS 94-090
and as per AMS 5628 rev F (10/06)
premium grade, hardenable stainless steel
a powder metallurgy product
annealed, drawn, in 3m bars
pointed and chamfered
diam. 2.20 mm, tolerance ISO h5
bars 3m
drawn
h 5
106 kg
0
270 711 - 106.450
2-200
bars-3m
drawn
h-5-en
2.400
45503902400
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
as per ASTM F-899, NFS 94-090
and as per AMS 5628 rev F (10/06)
premium grade, hardenable stainless steel
a powder metallurgy product
annealed, drawn, in 3m bars
pointed and chamfered
diam. 2.40 mm, tolerance ISO h5
bars 3m
drawn
h 5
35 kg
0
270 711 - 34.800
2-400
bars-3m
drawn
h-5-en
18.000
455130180001
Chronifer M 15 X
German no 1.4057, X17CrNi16 2, AISI 431
as per ASTM F-899, NFS 94-090,
premium grade, hardenable stainless
a powder metallurgy product
ground, polished, in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% eddy current crack tested
diam. 18.00 mm, tolerance ISO h6
bars 3m
ground
h 6
363 kg
0
300 316 - 362.700
18-000
bars-3m
ground
h-6-en
28.000
455130280001
Chronifer M 15 X
German no 1.4057, X17CrNi16 2, AISI 431
as per ASTM F-899, NFS 94-090,
premium grade,hardenable stainless
a powder metallurgy product
annealed, ground, polished,
in 3m lengths (+30/0mm)
end of bars:chamfered
100% eddy current crack tested
diam. 28.00 mm, tolerance ISO h6
bars 3m
ground
h 6
0 kg
0
0
28-000
bars-3m
ground
h-6-en
2.200
45500802200
Chronifer M 15 X
German no 1.4057, X17CrNi16 2, Aisi 431
premium grade,hardenable stainless
a powder metallurgy product, ferrite free
as per ASTM F-899-10, NF S94-090,
and as per AMS 5628 rev F (10/06)
annealed, (8% skinpass for redrawer)
oily surface, finish: Ra 0.2my aim
in coils of 200 +/-50 kg
inner diam. 600-1000mm, ext. 710-1400mm
diam. 2.20 mm, tolerance +/-0.025 mm
in spools
drawn
spec.
212 kg
0
050 716 - 212.000
2-200
in-spools
drawn
spec-en
1.300
45503901300
Chronifer M 15 X
no 1.4057, X17CrNi16 2, AISI 431
premium grade, hardenable stainless
a powder metallurgy product
ASTM F-899-07, NF S94-090,
AMS 5628 rev F (10/06)
annealed, cold drawn, in 3m bars
diam. 1.30 mm, tolerance ISO h5
bars 3m
drawn
h 5
34 kg
0
151 209 - 33.907
1-300
bars-3m
drawn
h-5-en
18.000
455139180001
Chronifer M 15 X
German no 1.4057, X17CrNi16 2, AISI 431
as per ASTM F-899, NFS 94-090,
premium grade, hardenable stainless
a powder metallurgy product
hardened, tempered ~52 HRC
ground, polished, in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% eddy current crack tested
diam. 18.00 mm, tolerance ISO h5
bars 3m
ground
h 5
33 kg
0
300 316 - 32.500
18-000
bars-3m
ground
h-5-en
2.000
45513902000
Chronifer M 15 X
no. 1.4057, X17CrNi16 2, AISI 431
as per ASTM F-899, NF S94-090
and AMS5628 rev. F
prem. grade, hardenable stainless steel
a powder metallurgy product
cond. T (QT800),
ground, polished, in 3m bars (+/-15mm)
diam. 2.00 mm, tolerance ISO h5
bars 3m
ground
h 5
11 kg
0
271 113 - 11.095
2-000
bars-3m
ground
h-5-en
9.000
45513909000
Chronifer M 15 X
no 1.4057, X17CrNi16 2 ,AISI 431
as per ASTM F-899, NF S94-090
prem. grade, hardenable stainless steel
a powder metallurgy product
annealed, drawn, ground, polished
in 3m bars (+30/0mm)
100% eddy current crack tested
diam. 9.00 mm, tolerance ISO h5
bars 3m
ground
h 5
334 kg
0
280 611 - 333.600
9-000
bars-3m
ground
h-5-en
0.400
45500600400
Chronifer M 15 X
German no 1.4057, X17CrNi16 2, AISI 431
premium grade, hardenable stainless
a powder metallurgy product
as per ASTM F-899-07, NFS 94-090,
and as per AMS 5628 rev F (10/06)
precisely cold drawn, tensile Rm ~1000 MPa
on spool SH390K
diam. 0.40 mm, tolerance ISO h9
in spools
drawn
fg 6
2 kg
0
151 209 - 2.050
0-400
in-spools
drawn
fg-6-en
0.800
45500000800
Chronifer M 15 X
no. 1.4057, X17CrNi16 2, Aisi 431
premium grade,hardenable stainless
a powder metallurgy product
as per ASTM F-899-07, NFS 94-090,
AMS 5628 rev F (10/06)
annealed, drawn, on spool
diam. 0.80 mm, tolerance ISO h6
in spools
drawn
h 6
55 kg
0
151 209 - 54.988
0-800
in-spools
drawn
h-6-en
10.000
455130100002
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
prem. grade, hardenable stainless steel
a powder metallurgy product
as per ASTM F-899, NF S94-090
hardened and tempered at 51-54 HRC
ground, polished, in 3m bars
pointed, chamfered, eddy current tested
diam. 10.00 mm, tolerance ISO h6
bars 3m
ground
h 6
46 kg
0
230 518 - 46.000
10-000
bars-3m
ground
h-6-en
3.100
455139031001
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
prem. grade, hardenable stainless steel
a powder metallurgy product
as per ASTM F-899, NF S94-090
ground, polished, eddy current tested
tempered at ~52 HRC
in 3m bars (+30/0 mm)
diam. 3.10 mm, tolerance ISO h5
bars 3m
ground
h 5
0 kg
0
0
3-100
bars-3m
ground
h-5-en
5.100
455139051001
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
prem. grade, hardenable stainless steel
a powder metallurgy product
as per ASTM F-899, NF S94-090
annealed, drawn, ground, tempered,
hardness ~51-54 HRC
in 3m bars (+30/0mm)
end of bars: pointed and chamfered
100% eddy current crack tested
diam. 5.10 mm, tolerance ISO h5
bars 3m
ground
h 5
0 kg
0
0
5-100
bars-3m
ground
h-5-en
3.000
45503903000
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
premium grade, hardenable stainless steel
a powder metallurgy product
as per ASTM F-899, NFS 94-090
and as per AMS 5628 rev F (10/06)
annealed, drawn, in 3m bars
pointed and chamfered
diam. 3.00 mm, tolerance ISO h5
bars 3m
drawn
h 5
265 kg
0
271 117 - 264.870
3-000
bars-3m
drawn
h-5-en
13.200
45513813200
Chronifer M 15 X
German no 1.4057, X17CrNi16 2,
AISI 431 micro-melt
premium grade,hardenable stainless
a powder metallurgy product
as per ASTM F-899, NF S94-090 (chem.)
annealed,wrought, ground, polished,
in 3m lengths (+30/0mm)
end of bars: pointed, chamfered
100% ultrasonic inspected, eddycurrent tested
diam. 13.20 mm, tolerance +/-0.038 mm
bars 3m
ground
spec.
848 kg
0
201 119 - 848.000
13-200
bars-3m
ground
spec-en
31.750
45513831750
Chronifer M 15 X
no. 1.4057, X17CrNi16 2, AISI 431
as per ASTM F-899, NFS 94-090,
premium grade hardenable stainless
a powder metallurgy high end product
annealed, ground, polished,
in 3m bars (+30/0mm)
end of bars:chamfered
eddy current crack tested, ultrasonic inspected
diam. 31.75 mm (1 1/4”), tolerance ISO h9
bars 3m
ground
spec.
368 kg
0
170 919 - 367.700
31-750
bars-3m
ground
spec-en
11.000
455130110001
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
prem. grade, hardenable stainless steel
a powder metallurgy product
as per ASTM F-899, NF S94-090
tempered at 51-54 HRC
ground, polished, in 2.9m +/-10cm bars
pointed, chamfered, eddy current tested
diam. 11.00 mm, tolerance ISO h6
bars 3m
ground
h 6
70 kg
0
301 018 - 69.500
11-000
bars-3m
ground
h-6-en
11.500
45513811500
Chronifer M 15 X
German no 1.4057, X17CrNi16 2,
AISI 431 micro-melt
premium grade,hardenable stainless
a powder metallurgy product
as per ASTM F-899, NFS 94-090 (chem.)
annealed,wrought, ground, polished,
in 3m lengths (+30/0mm)
end of bars: pointed, chamfered
100% ultrasonic inspected
diam. 11.50 mm, tolerance +/-0.038 mm
bars 3m
ground
spec.
473 kg
0
191 118 - 473.000
11-500
bars-3m
ground
spec-en
11.000
45513911000
Chronifer M 15 X
no. 1.4057, X17CrNi16 2,
AISI 431 micro-melt
as per ASTM F-899, NFS 94-090 (chem.)
premium grade, hardenable stainless
a powder metallurgy product
annealed, wrought, ground, polished,
in 3m lengths (+30/0mm)
end of bars: pointed, chamfered
100% ultrasonic crack detected
diam. 11.00 mm, tolerance ISO h5
bars 3m
ground
h 5
379 kg
0
301 018 - 379.000
11-000
bars-3m
ground
h-5-en
25.400
45513325400
Chronifer M 15 X
German no 1.4057, X17CrNi16 2, AISI 431
as per ASTM F-899, NF S94-090, (chem.only)
premium grade,hardenable stainless
a powder metallurgy product
annealed, ground, polished,
in 3m lengths (+30/0mm)
end of bars: pointed, chamfered
100% eddy current crack tested and
ultrasonic inspected
diam. 25.40 mm (1”), tolerance ISO h9
bars 3m
ground
h 9
778 kg
0
221 019 - 778.000
25-400
bars-3m
ground
h-9-en
21.000
45513321000
Chronifer M 15 X
German no 1.4057, X17CrNi16 2, AISI 431
per ASTM F-899, NF S94-090 (chem.only)
premium grade,hardenable stainless
a powder metallurgy product
annealed, ground, polished,
in 3m lengths (+30/0mm)
end of bars: pointed, chamfered
100% eddy current crack tested and
ultrasonic inspected
diam. 21.00 mm, tolerance ISO h9
bars 3m
ground
h 9
275 kg
0
221 019 - 275.000
21-000
bars-3m
ground
h-9-en
0.250
45500000250
Chronifer M 15 X
German no 1.4057, X17CrNi16 2, AISI 431
premium grade, hardenable stainless
a powder metallurgy product
as per ASTM F-899-07, NFS 94-090,
and as per AMS 5628 rev F (10/06)
precisely cold drawn, tensile Rm ~1000 MPa
on spool DIN 125
diam. 0.25 mm, tolerance ISO h6
in spools
drawn
h 6
0 kg
0
0
0-250
in-spools
drawn
h-6-en
1.570
45513001570
Chronifer M 15 X
no 1.4057, X17CrNi16 2, AISI 431
premium grade, hardenable stainless
a powder metallurgy product
ASTM F-899-10, NF S94-090,
AMS 5628 rev F (10/06)
annealed, cold drawn, ground, in 3m bars
diam. 1.57 mm, tolerance ISO h6
bars 3m
ground
h 6
1 kg
0
211 013 - 0.900
1-570
bars-3m
ground
h-6-en
16.000
455130160001
Chronifer M 15 X
no. 1.4057, X17CrNi16 2, AISI 431
as per ASTM F-899, NFS 94-090,
premium grade, hardenable stainless
a powder metallurgy product
hardened, tempered ~52 HRC
ground, polished, in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% eddy current crack tested
diam. 16.00 mm, tolerance ISO h6
bars 3m
ground
h 6
50 kg
0
290 621 - 50.000
16-000
bars-3m
ground
h-6-en
1.750
45513001750
Chronifer M 15 X
no 1.4057, X17CrNi16 2, AISI 431
premium grade, hardenable stainless
a powder metallurgy product
ASTM F-899-10, NF S94-090,
AMS 5628 rev F (10/06)
annealed, cold drawn, ground,
in 3m bars (+30/0mm)
diam. 1.75 mm, tolerance ISO h6
bars 3m
ground
h 6
0 kg
0
0
1-750
bars-3m
ground
h-6-en
30.000
455130300001
Chronifer M 15 X
no. 1.4057, X17CrNi16 2, AISI 431
as per ASTM F-899, NFS 94-090,
EN 10088-3 (chem. only)
premium grade, hardenable stainless
a powder metallurgy high end product
annealed, ground, 3m bars (+30/0mm)
end of bars:chamfered
eddy current crack tested, ultrasonic inspected
diam. 30.00 mm, tolerance ISO h6
bars 3m
ground
h 6
305 kg
0
170 919 - 305.494
30-000
bars-3m
ground
h-6-en
13.000
455139130001
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
premium grade,hardenable stainless
a powder metallurgy product
as per ASTM F-899, NFS 94-090,
hardened and tempered at 51-54 HRC
ground, polished, in 3m bars
end of bars: pointed, chamfered
100% eddy current + US crack tested
diam. 13.00 mm, tolerance ISO h5
bars 3m
ground
h 5
91 kg
0
201 119 - 91.000
13-000
bars-3m
ground
h-5-en
17.200
45513317200
Chronifer M 15 X
German no 1.4057, X17CrNi16 2, AISI 431
as per ASTM F-899, NFS 94-090,
premium grade,hardenable stainless
a powder metallurgy product
annealed, ground, polished,
in 3m lengths (+30/0mm)
end of bars: pointed, chamfered
100% eddy current crack tested
diam. 17.20 mm, tolerance ISO h9
bars 3m
ground
h 9
0 kg
0
0
17-200
bars-3m
ground
h-9-en
20.000
455130200001
Chronifer M 15 X
no. 1.4057, X17CrNi16 2, AISI 431
per ASTM F-899, NF S94-090 (chem.only)
premium grade, hardenable stainless
a powder metallurgy product
annealed, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% eddy current crack tested and
ultrasonic inspected
diam. 20.00 mm, tolerance ISO h6
bars 3m
ground
h 6
247 kg
0
221 019 - 246.600
20-000
bars-3m
ground
h-6-en
20.000
455130200002
Chronifer M 15 X
no. 1.4057, X17CrNi16 2, AISI 431
as per ASTM F-899, NFS 94-090,
premium grade, hardenable stainless
a powder metallurgy product
hardened, tempered ~52 HRC
ground, in 3m bars
end of bars: pointed, chamfered
100% eddy current crack tested and
ultrasonic inspected
diam. 20.00 mm, tolerance ISO h6
bars 3m
ground
h 6
93 kg
0
221 019 - 93.000
20-000
bars-3m
ground
h-6-en
13.000
455130130002
Chronifer M 15 X
no. 1.4057, X17CrNi16 2, Aisi 431
premium grade, hardenable stainless
a powder metallurgy product
as per ASTM F-899, NFS 94-090
annealed, ground, polished
in 3m bars (+30/0mm)
100% eddy current + US crack tested
diam. 13.00 mm, tolerance ISO h6
bars 3m
ground
h 6
101 kg
0
250 612 - 101.000
13-000
bars-3m
ground
h-6-en
17.000
455130170002
Chronifer M 15 X
no. 1.4057, X17CrNi16 2, Aisi 431
premium grade,hardenable stainless
a powder metallurgy product
as per ASTM F-899, NFS 94-090,
hardened, tempered ~52 HRC
ground, in 3m bars
end of bars: pointed, chamfered
100% eddy current + US crack tested
diam. 17.00 mm, tolerance ISO h6
bars 3m
ground
h 6
0 kg
0
0
17-000
bars-3m
ground
h-6-en
17.000
455130170001
Chronifer M 15 X
no. 1.4057, X17CrNi16 2, AISI 431
as per ASTM F-899, NFS 94-090
premium grade hardenable stainless steel
a powder metallurgy product
annealed, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% eddy current crack tested
diam. 17.00 mm, tolerance ISO h6
bars 3m
ground
h 6
358 kg
0
290 621 - 357.500
17-000
bars-3m
ground
h-6-en
5.600
45513805600
Chronifer M 15 X
German no 1.4057, X17CrNi16 2, AISI 431
premium grade,hardenable stainless
a powder metallurgy product
as per ASTM F-899-12B, NFS 94-090 (chem.)
annealed,wrought,ground,polished,
in 3m lengths (+30/0mm)
end of bars: pointed, chamfered
diam. 5.60 mm, tolerance +/-0.025 mm
bars 3m
ground
spec.
521 kg
0
310 823 - 521.000
5-600
bars-3m
ground
spec-en
15.870
45513815870
Chronifer M 15 X
no 1.4057, X17CrNi16 2, AISI 431
premium grade,hardenable stainless
a powder metallurgy product
as per ASTM F-899-90, NF S94-090,
annealed, ground, polished,
in 3m lengths (+30/0mm)
end of bars: pointed, chamfered
100% eddy current + US crack tested
diam. 15.87 mm (5/8”), tolerance +/-0.050 mm
bars 3m
ground
spec.
924 kg
0
311 023 - 460.000|221 123 - 464.000
15-870
bars-3m
ground
spec-en
4.800
45513804800
Chronifer M 15 X
German no 1.4057, X17CrNi16 2, Aisi 431
premium grade,hardenable stainless
a powder metallurgy product
as per ASTM F-899-20, NF S94-090 (chem.)
annealed,wrought,ground,polished,
in 3m lengths (+30/0mm)
end of bars: pointed, chamfered
diam. 4.80 mm, tolerance +/-0.025 mm
bars 3m
ground
spec.
1012 kg
0
081 223 - 498.000|281 123 - 514.000
4-800
bars-3m
ground
spec-en
1.150
45500001150
Chronifer M 15 X
German no 1.4057, X17CrNi16 2, Aisi 431
premium grade,hardenable stainless
a powder metallurgy product
as per ASTM F-899-07, NFS 94-090,
and as per AMS 5628 rev F (10/06)
annealed, (8% skinpass for redrawer)
on spool
diam. 1.15 mm, tolerance ISO h6
in spools
drawn
h 6
0 kg
0
0
1-150
in-spools
drawn
h-6-en
5.500
45513905500
Chronifer M 15 X
no. 1.4057, X17CrNi16 2, Aisi 431
premium grade, hardenable stainless
a powder metallurgy product
as per ASTM F-899-12B, NFS 94-090 (chem.)
annealed, drawn, ground, polished,
in 3m bars (+30/0mm)
end of bars: pointed, chamfered
diam. 5.50 mm, tolerance ISO h5
bars 3m
ground
h 5
377 kg
0
080 923 - 377.000
5-500
bars-3m
ground
h-5-en
5.500
455139055001
Chronifer M 15 X
no. 1.4057, X17CrNi16 2, Aisi 431
prem. grade, hardenable stainless steel
a powder metallurgy product
as per ASTM F-899, NF S94-090
tempered at 51 – 54 HRC
ground, polished, in 3m bars (+30/0mm)
pointed/chamfered
diam. 5.50 mm, tolerance ISO h5
bars 3m
ground
h 5
96 kg
0
100 923 - 96.000
5-500
bars-3m
ground
h-5-en
8.000
455139080001
Chronifer M 15 X
no. 1.4057, X17CrNi16 2, Aisi 431
prem. grade, hardenable stainless steel
a powder metallurgy product
as per ASTM F-899, NF S94-090
tempered at 51 – 54 HRC
ground, polished, in 3m bars (+30/0mm)
pointed/chamfered
diam. 8.00 mm, tolerance ISO h5
bars 3m
ground
h 5
92 kg
0
100 923 - 91.500
8-000
bars-3m
ground
h-5-en
2.000
455139020001
Chronifer M 15 X
no 1.4057, X17CrNi16 2, Aisi 431
premium grade,hardenable stainless
a powder metallurgy product, ferrite free
as per ASTM F-899-10, NF S94-090,
and as per AMS 5628 rev F (10/06)
tempered 1600-1750 MPa (~52 HRC)
straightened, in 3m bars (+/-15mm)
diam. 2.00 mm, tolerance ISO h8
bars 3m
ground
h 5
0 kg
0
0
2-000
bars-3m
ground
h-5-en
3.200
45500303200
Brief description
Designation Klein:
CHRONIFER M-15 X
Class of metals:
Hardenable martensitic stainless steel
with N addition
Material number:
1.4057
Standard DIN:
X 17 CrNi 16-2
Fusion:
VIM + Micro-Melt®Powder metallurgy
Machinability:
satisfactory
Hardening capability:
up to 52-55 HRc
Polishing ability:
very well adapted for mirror polishing
Corrosion resistance:
up to good in the hardened, polished
and passivized condition
Magnetism:
magnetic
Uses:
medical, surgical and dental
instruments
The hardenable stainless CHRONIFER M-15 X (431 (X) is produced by a special powder metallurgic technology.
This technique allows a significant improvement of the properties of the steel.
Properties of 431 (X) F-899 micro melt Medical steel
431 (X) has a very fine microstructure and homogeneity, resulting in good processability, wear resistance and excellent polishing and corrosion resistance. With this outstanding characteristics of CHRONIFER M-15X, the rejection rate in the production of finished parts is reduced, thus the needed material for the production is also lower.
Applications of 431 (X) F-899 micro melt
M-15 X meets the high quality requirements that are imposed on instruments in the medical and in the dental industry.
Its excellent hardenability, ductility and corrosion resistance ensures the manufacturing of precise, wear-resistant parts for this sector.
In medical engineering the steel is used for the production of gear parts, rotating instruments, surgical instruments like pliers, pincers or scissors, in the dental industry drills, gear parts for rotating instruments and more are manufactured from this material.
