This steel is used in numerous branches of various industries, such as the chemical, pharmaceutical, food, and oil-related, paper and textile industries. It is widely used in the fine mechanical engineering and the mechatronic industries. It is also used for components of watch movements as well as for the watch exterior.
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316L, ASTM A580/A580M
as per DIN EN 10088-3
as per NF S94-090 (chem. Analysis)
ASTM A276, A478, A493, A959
stainless steel Chrom-Nickel
drawn, ground, polished, in 3m bars
pointed/chamfered, eddy current tested
diam. 2.30 mm, tolerance ISO h7
bars 3m
ground
h 7
102 kg
0
021 205 - 101.769
2-300
bars-3m
ground
h-7-en
2.350
55413102350
Chronifer Special 35 Aisi 316 L
no 1.4435, X2CrNiMo18-14-3
stainless steel Chrom-Nickel
as per DIN EN 10088-3
cold drawn, ground, polished,
in 3m bars (+30/0mm)
end of bars: pointed and chamfered, 100% eddy current crack tested
diam. 2.35 mm, tolerance ISO h7
bars 3m
ground
h 7
0 kg
0
0
2-350
bars-3m
ground
h-7-en
0.600
55401200600
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
as per DIN EN 10088-3, AISI 316L
stainlessl Chrom-Nickel steel
hard (1643-1646N/mm2)
drawn, in 1m bars
diam. 0.60 mm, tolerance ISO h8
special length
drawn
h 8
27 kg
0
210 901 - 27.184
0-600
special-length
drawn
h-8-en
12.500
55413112500
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
gemäss DIN EN 10088-3, AISI 316 L
stainless steel Chrom-Nickel
drawn, ground, polished, in 3m bars
pointed/chamfered, eddy current tested
diam. 12.50 mm, tolerance ISO h7
bars 3m
ground
h 7
356 kg
0
250 706 - 355.800
12-500
bars-3m
ground
h-7-en
2.280
55413802280
Chronifer Special 35 Aisi 316 L
no 1.4435, X2CrNiMo18-14-3
stainless steel Chrom-Nickel
drawn, ground, polished, in 3m bars
Rm: 1300 N/mm2 apprx.
diam. 2.28 mm, tolerance 0/-0.005mm
bars 3m
ground
spec.
4 kg
0
270 700 - 4.400
2-280
bars-3m
ground
spec-en
2.800
55413102800
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316L, DIN EN 10088-3
stainless steel Chrom-Nickel
drawn, ground, in 3m bars
pointed/chamfered, eddy current tested
diam. 2.80 mm, tolerance ISO h7
bars 3m
ground
h 7
38 kg
0
150 704 - 0.300|100 205 - 37.552
2-800
bars-3m
ground
h-7-en
2.900
55413102900
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
as per EN 10088-3, AISI 316L
stainless steel Chrom-Nickel
As per ASTM F-899
drawn, ground, in 3m bars
pointed/chamfered, eddy current tested
diam. 2.90 mm, tolerance ISO h7
bars 3m
ground
h 7
294 kg
0
240 102 - 294.050
2-900
bars-3m
ground
h-7-en
0.200
554058002001
Chronifer Special 35
mat. no 1.4435, X2CrNiMo18-14-3, AISI 316L
seamless tubes, hard
in 3m lengths +/- 100mm
surface finish OD and ID: N5
tolerance OD and ID: 0/-0.02mm
3.0 x 2.60 mm (wall 0.20mm)
tubes
drawn
spec.
570 kg
0
160 301 - 569.850
0-200
tubes
drawn
spec-en
1.200
55400001200
Chronifer Special 35
no mat. 1.4435, X2CrNiMo18-14-3
UNS S31603, AISI 316L, ASTM A580/580M
per EN 10088-3, NF S94 090, UNS S31603
ASTM A493, A478, A276 (chem. only)
stainless Chrom-Nickel-Molybdene steel
precisely cold drawn, 350 +/-30 HV
in coils of 10-13kg weight
diam. 1.20 mm, tolerance ISO h6
in spools
drawn
h 6
0 kg
0
0
1-200
in-spools
drawn
h-6-en
6.000
55413006000
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
UNS S31603 (chem. only), ASTM A959
as per EN 10088-3 12/14, ASTM A276
NF S 94-090, ASTM A580/A580M
ASTM A478, ASTM A479/a479m, AISI 316L
stainless steel Chrom-Nickel-Mo
cold drawn, ground, polished,
annealed, stress relieved,
in 3m bars (+40/0mm)
end of bars: pointed and chamfered
100% eddycurrent crack tested cl. 4
diam. 6.00 mm, tolerance ISO 286-2/h6
bars 3m
ground
h 6
2364 kg
0
180 326 - 1790.000|160 425 - 575.000
6-000
bars-3m
ground
h-6-en
6.100
55413206100
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316L, gem. EN 10088-3
stainless steel Chrom-Nickel
drawn, ground, polished, in 3m bars
pointed/chamfered, eddy current tested
diam. 6.10 mm, tolerance ISO h8
bars 3m
ground
h 8
80 kg
0
221 100 - 79.920
6-100
bars-3m
ground
h-8-en
7.100
55413207100
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
as per DIN EN 10088-3, AISI 316l
stainless steel Chrom-Nickel-Mo
drawn, ground, polished, in 3m bars
end of bars: pointed/chamfered,
100% eddy current crack tested
diam. 7.10 mm, tolerance ISO h8
bars 3m
ground
h 8
12 kg
0
010 900 - 11.500
7-100
bars-3m
ground
h-8-en
2.575
55405802575
Chronifer Special 35 Aisi 316 L
W-Nr. 1.4435, X2CrNiMo18-14-3
seamless tubes, bright surface
in 1.5m bars 0/-150mm
tensile strength: 965N/mm2 minimum
OD tolerance +0.04/0mm
ID tolerance 0/-0.10mm
6.35 x 1.20mm (2.575mm wall)
tubes
drawn
spec.
528 kg
0
110 500 - 528.000
2-575
tubes
drawn
spec-en
1.400
55400001400
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316L, as per DIN EN 10088-3
stainless steel Chrom-Nickel
precisely cold drawn, hardness ~330 HV
in coils for ESCO
diam. 1.40 mm, tolerance ISO h6
in spools
drawn
h 6
30 kg
0
220 317 - 29.600
1-400
in-spools
drawn
h-6-en
1.230
55400001230
Chronifer Special 35 Aisi 316 L
no 1.4435, X2CrNiMo18-14-3
HV 300 ca.
stainless steel Chrom-Nickel
drawn, in coils
diam. 1.23 mm, tolerance ISO h6
in spools
drawn
h 6
0 kg
0
0
1-230
in-spools
drawn
h-6-en
0.120
55405800120
Chronifer Special 35
Aisi 316 L, material number 1.4435
seamless tubes, in 3m bars +/- 200mm
hardness 200-250 HV, elong. 30-60%
tolerance OD +/- 0,10mm
tolerance wall +/- 0,012mm
diam. 8.00 x 7.76 x 0.120 mm
tubes
drawn
spec.
271 kg
0
280 198 - 270.700
0-120
tubes
drawn
spec-en
0.250
55405800250
Chronifer Special 35
W-Nr. 1.4435, X2CrNiMo18-14-3
AISI 316L, seamles tubes
in 3m lengths +/- 200mm
surface Ra max. 0,8 my
tensile strength: Rm 750-900 MPa
OD tol. 0/-0,03mm, ID tol.. +0,03/0mm
round 4.00 x 3.50mm (wall: 0.25mm)
tubes
drawn
spec.
292 kg
0
101 221 - 292.090
0-250
tubes
drawn
spec-en
0.358
55405800358
Chronifer Special 35
Aisi 316 L, german no 1.4435
seamless tubes, in 3m bars +/- 200mm
hardness 200-250 HV, elong. 20-40%
tolerance outer dia +/- 0,10mm
tolerance wall +/- 0,018mm
diam. 8.00 x 7.284 x 0.358 mm
tubes
drawn
spec.
277 kg
0
280 198 - 277.000
0-358
tubes
drawn
spec-en
0.263
55405800483
Chronifer Special 35 Aisi 316 L
W-Nr. 1.4435, X2CrNiMo18-14-3
seamless tubes, in 3m bars +/- 200mm
hardness 200-250 HV, elong. 20-40%
tolerance outer dia +/- 0,10mm
tolerance wall +/- 0,013mm
diam. 8.00 x 7.474 x 0.263 mm
tubes
drawn
spec.
249 kg
0
280 198 - 249.000
0-263
tubes
drawn
spec-en
2.700
55400502700
Chronifer Special 35 Aisi 316 L
no 1.4435, X2CrNiMo18-14-3
stainless steel Chrom-Nickel
hardness: apprx. 250 HV
drawn polished, in coils
diam. 2.70 mm, tolerance ISO fg8
in spools
drawn
fg 8
68 kg
0
120 902 - 68.000
2-700
in-spools
drawn
fg-8-en
4.750
55413204750
Chronifer Special 35
as per DIN EN 10088-3, AISI 316L
no 1.4435, X2CrNiMo18-14-3
stainless steel Chrom-Nickel
as per ASTM F-899
cold drawn, ground, polished
in 3m bars (+40/0mm)
pointed/chamfered, eddy current tested
diam. 4.75 mm, tolerance ISO h8
bars 3m
ground
h 8
27 kg
0
310 399 - 26.831
4-750
bars-3m
ground
h-8-en
0.800
55400100800
Chronifer Special 35 Aisi 316 L
no 1.4435, X2CrNiMo18-14-3
selon EN 10088-3
stainless steel Chrom-Nickel
cold drawn, polished,
tensile strength Rm: 850-1000MPa
on spools of apprx. 5-10kg
diam. 0.80 mm, tolerance ISO h7
in spools
drawn
h 7
0 kg
0
0
0-800
in-spools
drawn
h-7-en
8.000
55413008000
Chronifer Special 35
W-Nr. 1.4435, X2CrNiMo18-14-3
AISI 316L, UNS S31603, ASTM A479
as per EN 10088-3, NF S94 090
ASTM A580/A580M, ASTM A959
ASTM A276, ASTM A478 (chem.)
stainless steel Chrom-Nickel
cold drawn, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% eddycurrent crack tested cl. 4
diam. 8.00 mm, tolerance ISO 286-2/h6
bars 3m
ground
h 6
1295 kg
0
060 922 - 428.400|210 223 - 867.000
8-000
bars-3m
ground
h-6-en
1.300
55400001300
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316 L, DIN EN 10088-3, NF S94 090
ASTM A478, A493, A580/A580M,
ASTM A959, UNS S31603
ASTM A276 (chem. only), RoHS konform
stainless steel Chrom-Nickel
cold drawn,hardness 280 HV +/-20
in coils of 10-12kg
diam. 1.30 mm, tolerance ISO 286-2/h6
in spools
drawn
h 6
316 kg
0
270 923 - 315.900
1-300
in-spools
drawn
h-6-en
0.900
55400000900
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
DIN EN 10088-3, AISI 316L
stainless steel Chrom-Nickel
precisely cold drawn, hardness ~380HV
in coils of apprx. 20kg
diam. 0.90 mm, tolerance ISO h6
in spools
drawn
h 6
43 kg
0
280 202 - 43.400
0-900
in-spools
drawn
h-6-en
8.100
55413108100
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
as per DIN EN 10088-3, AISI 316L
stainless steel Chrom-Nickel
cold drawn, ground, polished
in 3m bars (+30/0mm)
pointed, chamfered end of bars
100% eddy current crack tested
diam. 8.10 mm, tolerance ISO h7
bars 3m
ground
h 7
39 kg
0
150 605 - 38.750
8-100
bars-3m
ground
h-7-en
1.600
55402201600
Chronifer Special 35 Aisi 316 L
no 1.4435, X2CrNiMo18-14-3
stainless steel Chrom-Nickel
cold drawn, in 2m bars
diam. 1.60 mm, tolerance ISO h8
bars 2m
drawn
h 8
2 kg
0
280 411 - 2.016
1-600
bars-2m
drawn
h-8-en
1.350
55400501350
Chronifer Special 35
as per EN 10088-3, AISI 316L
no 1.4435, X2CrNiMo18-14-3
stainless steel Chrom-Nickel
precisely cold drawn,
in coils, HV 300 apprx.
diam. 1.35 mm, tolerance ISO fg8
in spools
drawn
fg 8
11 kg
0
100 419 - 11.400
1-350
in-spools
drawn
fg-8-en
2.700
55413102700
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316L, as per DIN EN 10088-3 9/05
stainless steel Chrom-Nickel
drawn, ground, in 3m bars
pointed/chamfered, eddy current tested
diam. 2.70 mm, tolerance ISO h7
bars 3m
ground
h 7
26 kg
0
040 305 - 25.917
2-700
bars-3m
ground
h-7-en
1.500
55403101500
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3, AISI 316L
as per EN 10088-3, UNS S31603
NF S94 090, ASTM A580/A580M, A959
stainless steel Chrom-Nickel
cold drawn, in 3m bars
diam. 1.50 mm, tolerance ISO h7
bars 3m
drawn
h 7
0 kg
0
0
1-500
bars-3m
drawn
h-7-en
2.000
55413002000
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316L, ASTM A580/A580M (chem.)
as per DIN EN 10088-3, RoHS conforme
as per NF S94-090 (chem. Analysis)
ASTM A276, A478, A493, A959 (chem.)
stainless steel Chrom-Nickel-Mo, RoHS conform
cold drawn, ground, polished
in 3m bars (+30/0mm), end of bars: chamfered
eddycurrent crack tested, class 4
diam. 2.00 mm, tolerance 286-2/h6
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
as per EN 10088-3, NF S94 090
UNS S31603, AISI 316L, RoHS conforme
ASTM A580/A580M, ASTM A959, A493
ASTM A276, ASTM A478 (chem.)
ASTM A479/A479M, A493, (chem.only)
stainless steel Chrom-Nickel-Mo
cold drawn, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed,chamfered
eddycurrent crack tested cl. 4
diam. 3.00 mm, tolerance ISO 286-2/h6
bars 3m
ground
h 6
1076 kg
800
230 125 - 1092.450
3-000
bars-3m
ground
h-6-en
4.000
55400504000
Chronifer Special 35 Aisi 316 L
no 1.4435, X2CrNiMo18-14-3
stainless steel Chrom-Nickel
as per DIN EN 10088-3
hardness: apprx. 250 HV
cold drawn, in coils
diam. 4.00 mm, tolerance ISO fg8
in spools
drawn
fg 8
0 kg
0
0
4-000
in-spools
drawn
fg-8-en
12.700
55413112700
Chronifer Special 35 AISI 316 L
no 1.4435, X2CrNiMo18-14-3
as per DIN EN 10088-3
stainless steel Chrom-Nickel
drawn, ground, polished, in 3m bars
pointed/chamfered, eddy current tested
diam. 12.70 mm (1/2″), tolerance ISO h7
bars 3m
ground
h 7
458 kg
0
280 806 - 458.000
12-700
bars-3m
ground
h-7-en
1.900
55403201900
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
selon DIN EN 10088-3, AISI 316 L
stainless steel Chrom-Nickel-Molybene
cold drawn, polished, in 3m bars
diam. 1.90 mm, tolerance ISO h8
bars 3m
drawn
h 8
54 kg
0
220 611 - 54.383
1-900
bars-3m
drawn
h-8-en
1.500
55413001500
Chronifer Special 35
EN 10088-3 12/14, as per NF S94-090,
UNS S31603, ASTM A276
ASTM A478, A479/A479M
ASTM A959, A493, A478
stainless steel Chrom-Nickel
cold drawn, ground, polished,
in 3m bars (+30/0mm)
end of bars: pointed, chamfered
eddycurrent crack tested cl. 4
diam. 1.50 mm, tolerance ISO h6
bars 3m
ground
h 6
172 kg
0
120 912 - 0.275|260 220 - 171.508
1-500
bars-3m
ground
h-6-en
1.600
55413001600
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316L, as per DIN EN 10088-3
stainless steel Chrom-Nickel-Mo Steel
drawn, ground, polished,
in 3m bars (+30/0mm)
end of bars: chamfered
diam. 1.60 mm, tolerance ISO h6
bars 3m
ground
h 6
0 kg
0
0
1-600
bars-3m
ground
h-6-en
2.000
55400702000
Chronifer Special 35
AISI 316 L, DIN EN 10088-3
no 1.4435, X2CrNiMo18-14-3
stainless steel Chrom-Nickel
cold drawn wire in coils
diam. 2.00 mm, tolerance ISO fg7
in spools
drawn
fg 7
46 kg
0
190 918 - 19.700|230 410 - 26.300
2-000
in-spools
drawn
fg-7-en
11.000
55413011000
Chronifer Special 35 Aisi 316 L
as per 1.4435, X2CrNiMo18-14-3, AISI 316L
per EN 10088-3 9/05, NF S94-090,
UNS S31603, ASTM A276/A276M
stainless steel Chrom-Nickel-Mo
drawn, ground, polished,
in 3m bars (+30/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested
diam. 11.00 mm, tolerance ISO h6
bars 3m
ground
h 6
863 kg
0
161 019 - 848.600|300 816 - 5.700|080 415 - 8.500
11-000
bars-3m
ground
h-6-en
7.000
55413007000
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3, AISI 316
as per EN 10088-3 12/14, NF S94 090,
ASTM A959, ASTM A276, ASTM A478 (chem.)
stainless steel Chrom-Nickel-Mo
cold drawn, ground, polished,
in 3m bars (+30/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested cl. 4
diam. 7.00 mm, tolerance ISO h6
bars 3m
ground
h 6
1106 kg
0
270 922 - 235.500|131 222 - 870.000
7-000
bars-3m
ground
h-6-en
0.900
55403200900
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316L, EN 10088-3, NF S94 090
UNS S31603, ASTM A478, A493, A959
ASTM A276 (chem.) ASTM A580/A580M
stainless steel Chrom-Nickel
cold drawn, polished, in 3m bars
diam. 0.90 mm, tolerance ISO h8
bars 3m
drawn
h 8
0 kg
0
0
0-900
bars-3m
drawn
h-8-en
8.500
55413008500
Chronifer Special 35
W-Nr. 1.4435, X2CrNiMo18-14-3
AISI 316L, UNS S31603
as per EN 10088-3, NF S94 090
ASTM A580/A580M, ASTM A959
ASTM A276, ASTM A478 (chem.)
stainless steel Chrom-Nickel-Mo
drawn, ground, polished,
in 3m bars (+30/0mm)
pointed/chamfered, eddy current tested
diam. 8.50 mm, tolerance ISO h6
bars 3m
ground
h 6
334 kg
500
111 218 - 318.200|121 011 - 15.900
8-500
bars-3m
ground
h-6-en
10.000
55413010000
Chronifer Special 35
mat.no. 1.4435, X2CrNiMo18-14-3
as per DIN EN 10088-3 12/14, UNS S31603
NF S94-090, ASTM ASTM A478, AISI 316L
ASTM A479/A479M-17, ASTM A276/A276M-17,
stainless steel Chrom-Nickel, RoHS conforme
drawn, ground, polished, in 3m bars (+30/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested cl. 4
diam. 10.00 mm, tolerance ISO 286-2/h6
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3, AISI 316 L
as per DIN EN 10088-3, NF S94 090
ASTM A580, ASTM A276 (chem. only)
ASTM A479/A479M, A493, A959
stainless steel Chrom-Nickel
cold drawn, ground, polished,
in 3m bars (+40/0mm)
end of bars: pointed, chamfered
100% eddy current crack tested
diam. 5.10 mm, tolerance ISO h6
bars 3m
ground
h 6
915 kg
0
270 612 - 91.300|190 423 - 823.500
5-100
bars-3m
ground
h-6-en
2.100
55413002100
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
UNS S31603, ASTM A276, ASTM A493
as per EN 10088-3 9/05, AISI 316 L
per NFS 94 090, ASTM 580/A580M
stainless steel Chrom-Nickel
drawn, ground,polished, in 3m bars
pointed/chamfered, eddy current tested
diam. 2.10 mm, tolerance ISO h6
bars 3m
ground
h 6
438 kg
0
100 316 - 437.600|210 911 - 0.366
2-100
bars-3m
ground
h-6-en
4.500
55413004500
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
as per EN 10088-3, as per NF S94 090
ASTM A580/A580M, ASTM A959
UNS S31603, ASTM A479/A479M
ASTM A276, ASTM A478, AISI 316L
stainless steel Chrom-Nickel
drawn, ground, polished,
in 3m bars (+40/0mm)
end of bars: pointed/chamfered
eddy current crack tested cl. 4
diam. 4.50 mm, tolerance ISO 286-2/h6
bars 3m
ground
h 6
1081 kg
0
150 123 - 170.824|280 824 - 960.000
4-500
bars-3m
ground
h-6-en
0.700
55400700700
Chronifer Special 35 Aisi 316 L
no 1.4435, X2CrNiMo18-14-3
stainless steel Chrom-Nickel
cold drawn, in coils
diam. 0.70 mm, tolerance ISO fg7
in spools
drawn
fg 7
0 kg
0
0
0-700
in-spools
drawn
fg-7-en
0.700
55402200700
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
as per EN 10088-3, AISI 316L
stainless steel Chrom-Nickel-Mo
as per ASTM F-899
drawn, in 2m bars
diam. 0.70 mm, tolerance ISO h8
bars 2m
drawn
h 8
22 kg
0
290 307 - 22.370
0-700
bars-2m
drawn
h-8-en
3.500
55413003500
Chronifer Special 35
mat.no. 1.4435, X2CrNiMo18-14-3
per EN 10088-3 12/14, NF S94 090,
ASTM A580/A580M, ASTM A959, (chem.)
UNS S31603, AISI 316 L, RoHS conforme
ASTM A276, ASTM A478 (chem.)
ASTM A479/A479M, ASTM A493
stainless steel Chrom-Nickel-Mo
drawn, ground, polished,
in 3m bars (+30/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested cl. 4
diam. 3.50 mm, tolerance ISO 286-2/h6
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
DIN EN 10088-3, Ferritgehalt <0.2%
as per NFS 94040, AISI 316L
stainless steel Chrom-Nickel
drawn, ground, polished, in 3m bars
pointed/chamfered, eddy current tested
diam. 3.60 mm, tolerance ISO h6
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3, AISI 316L
as per DIN EN 10088-3 09/05
stainless steel Chrom-Nickel
drawn, ground, in 3m bars
pointed/chamfered, eddy current tested
diam. 9.10 mm, tolerance ISO h6
bars 3m
ground
h 6
371 kg
0
151 013 - 346.900|030 900 - 24.000
9-100
bars-3m
ground
h-6-en
9.000
55413009000
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
as per EN 10088-3, AISI/SUS 316 L
NF S 94-090, ASTM A580/A580M
NF S 94-090, ASTM A478, A479/A479M
UNS S31603, ASTM A276/A276M-17
Stainless Chrom-Nickel-Molydene Steel
annealed, cold drawn, ground, polished
in 3m bars (+40/0mm)
end of bars: pointed chamfered
100% eddy current crack tested cl. 4
diam. 9.00 mm, tolerance ISO h6
bars 3m
ground
h 6
1413 kg
0
061 222 - 566.100|040 423 - 887.000
9-000
bars-3m
ground
h-6-en
3.000
55400703000
Chronifer Special 35
mat.no 1.4435, X2CrNiMo18-14-3,UNS S31603
AISI 316L, ASTM A580/A580M, RoHS conform
ASTM A478, ASTM A493, ASTM A276(Chem.)
EN 10088-3 12/14, NF S 94-090
stainless steel Chrom-Nickel-Mo
cold drawn, hardness approx. 250 HV
in coils of 20 – 30 kg
diam. 3.00 mm, tolerance ISO fg7
Chronifer Special 35 Aisi 316 L
no 1.4435, X2CrNiMo18-14-3
stainless steel Chrom-Nickel
drawn, in coils
diam. 2.30 mm, tolerance ISO fg7
in spools
drawn
fg 7
0 kg
0
0
2-300
in-spools
drawn
fg-7-en
5.500
55413005500
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
ASTM A276/A276M, A478, A479/A479M
AISI/SUS 316L, NF S94 090 (chem.)
stainless steel Chrom-Nickel-Molybdene
as per DIN EN 10088-3, UNS S31603
cold drawn, ground, polished,
in 3m bars (+40/0mm)
pointed and chamfered end of bars
eddy current crack tested cl. 4
diam. 5.50 mm, tolerance ISO h6
bars 3m
ground
h 6
854 kg
0
170 320 - 58.028|120 722 - 796.000
5-500
bars-3m
ground
h-6-en
4.100
55413004100
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
as per DIN EN 10088-3, AISI 316L
stainless steel Chrom-Nickel
conforme EG/2002/95 ROHS directive
drawn, ground, polished, in 3m bars
pointed/chamfered, eddy current tested
diam. 4.10 mm, tolerance ISO h6
Chronifer Special 35
mat.no 1.4435, X2CrNiMo18-14-3
as per EN 10088-3 12/14, NF S94 090
AISI 316 L UNS S31603, ASTM A479/479M
ASTM A580/A580M, ASTM A959
ASTM A276, ASTM A478 (chem.)
stainless steel Chrom-Nickel
cold drawn, ground, polished,
in 3m bars (+30/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested cl.4
diam. 5.00 mm, tolerance ISO h6
bars 3m
ground
h 6
1324 kg
0
141 122 - 1324.017
5-000
bars-3m
ground
h-6-en
4.000
55413004000
Chronifer Special 35
mat.no. 1.4435, X2CrNiMo18-14-3
as per DIN EN 10088-3 12/14, AISI 316L
NF S 94-090, ASTM A580/A580M (chem. only)
UNS S31603, ASTM A276, A478
ASTM A479/A479M, A493, A959 (chem. only)
stainless steel Chrom-Nickel-Moly. (RoHS conform)
cold drawn, ground, polished,
annealed, stress-relieved,
in 3m bars (+30/0mm)
pointed/chamfered, eddy current tested cl.4
diam. 4.00 mm, tolerance 286-2/ISO h6
bars 3m
ground
h 6
259 kg
2400
130 324 - 5.400|130 125 - 453.500
4-000
bars-3m
ground
h-6-en
16.000
55413016000
Chronifer Special 35
mat.no 1.4435, X2CrNiMo18-14-3
as per DIN EN 10088-3 12/14
AISI 316 L, UNS S31603, ASTM A276/A276M
NF S94-090, ASTM A580/A580M
ASTM A479/A479M, ASTM A478
annealed, ground, polished, in 3m bars (+50/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested cl. 4
diam. 16.00 mm, tolerance ISO 286-2/h6
Chronifer Special 35
no. 1.4435, X2CrNiMo18-14-3
UNS S31603 (chem.)
ASTM A479/479M, ASTM A276, A478
as per DIN EN 10088-3, AISI 316 L
NF S94 090 (chem. Analyse)
stainless steel Chrom-Nickel
peeled, ground, polished, in 3m bars (+50/0mm)
pointed/chamfered, eddy current tested
diam. 14.00 mm, tolerance ISO 286-2/h6
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
as per EN 10088-3, AISI 316 L
stainless steel Chrom-Nickel
cold drawn, polished
in coils, hardness HV 300
diam. 0.60 mm, tolerance ISO fg7
in spools
drawn
fg 7
46 kg
0
100 708 - 45.750
0-600
in-spools
drawn
fg-7-en
6.500
55413006500
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
as per EN 10088-3, ASTM A276
NF S 94-090, ASTM A580/A580M
ASTM A478, ASTM A479, AISI 316L
stainless steel Chrom-Nickel
cold drawn, ground, polished
in 3m bars (+40/0mm)
end of bars: pointed,chamfered
100% eddycurrent crack tested cl. 4
diam. 6.50 mm, tolerance ISO h6
bars 3m
ground
h 6
561 kg
800
170 320 - 9.450|030 822 - 551.700
6-500
bars-3m
ground
h-6-en
8.100
55413008100
Chronifer Special 35
AISI 316L, no 1.4435, X2CrNiMo18-14-3
as per DIN EN 10088-3
stainless steel Chrom-Nickel
drawn, ground, polished
in 3m bars (+30/0mm)
pointed, chamfered end of bars
100% eddy current crack tested
diam. 8.10 mm, tolerance ISO h6
bars 3m
ground
h 6
857 kg
0
100 516 - 856.800
8-100
bars-3m
ground
h-6-en
2.400
55413002400
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
as per DIN EN 10088-3, AISI 316 L
stainless steel Chrom-Nickel
drawn, ground, polished
in 3m bars (+30/0mm)
pointed and chamfered end of bars
100% eddycurrent crack tested
diam. 2.40 mm, tolerance ISO h6
bars 3m
ground
h 6
401 kg
0
160 408 - 401.300
2-400
bars-3m
ground
h-6-en
8.200
55413008200
Chronifer Special 35
DIN EN 10088-3, AISI 316L
no 1.4435, X2CrNiMo18-14-3
stainless steel Chrom-Nickel
drawn, ground, in 3m bars
pointed/chamfered, eddy current tested
diam. 8.20 mm, tolerance ISO h6
bars 3m
ground
h 6
695 kg
0
210 223 - 694.750
8-200
bars-3m
ground
h-6-en
3.300
55413003300
Chronifer Special 35
mat.no. 1.4435, X2CrNiMo18-14-3
per EN 10088-3 12/14, NF S94 090,
ASTM A580/A580M, ASTM A959, AISI 316 L
ASTM A276, ASTM A478 (chem.)
ASTM A479/A479M, ASTM A493
stainless steel Chrom-Nickel
drawn, ground, in 3m bars (+30/0mm)
pointed/chamfered, eddy current tested cl. 4
diam. 3.30 mm, tolerance ISO h6
bars 3m
ground
h 6
269 kg
0
290 921 - 256.000|220 317 - 13.000
3-300
bars-3m
ground
h-6-en
0.500
55400700500
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
as per DIN EN 10088-3, AISI 316 L
stainless steel Chrom-Nickel
precisely cold drawn, in coils/spools
diam. 0.50 mm, tolerance ISO fg7
in spools
drawn
fg 7
44 kg
0
100 708 - 43.961
0-500
in-spools
drawn
fg-7-en
12.000
55413012000
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
ASTM A276/A276M-17, NF S94-090 (chem)
as per DIN EN 10088-3 12/14, AISI 316L
UNS S31603, ASTM A478, A479/A479M
stainless steel Chrom-Nickel-Mo, RoHS conform
drawn, ground, polished, in 3m bars (+30/0mm)
end of bars:pointed/chamfered,
100% eddy current crack tested cl. 4
diam. 12.00 mm, tolerance ISO h6
Chronifer Special 35
AISI 316 L, as per EN10088-3
no 1.4435, X2CrNiMo18-14-3
~UNS S31603, NF S94 090,
stainless steel Chrom-Nickel
drawn, ground, polished, in 3m bars
end of bars: pointed/chamfered,
100% eddy current crack tested
diam. 7.50 mm, tolerance ISO h6
bars 3m
ground
h 6
965 kg
0
240 123 - 884.000|060 219 - 82.600
7-500
bars-3m
ground
h-6-en
22.000
55413022000
Chronifer Special 35 P
~no. 1.4435, X2CrNiMo18-14-3
as per EN 10088-3 12/14, AISI 316L
as per NF S94 090 (chem. only)
extra fine metallurgy VIM/ESU/VAR
high Grade Stainless Chrom-Nickel Steel
solution annealed ground, polished,
in 3m bars (+50/0 mm)
end of bars: pointed, chamfered,
each bar ultrasonic + eddycurrent crack tested
diam. 22.00 mm, tolerance ISO h6
bars 3m
ground
h 6
499 kg
0
170 719 - 498.600
22-000
bars-3m
ground
h-6-en
13.000
55413013000
Chronifer Special 35
W-Nr. 1.4435, X2CrNiMo18-14-3
as per DIN EN 10088-3 9/05
NFS 94-090, ASTM A580/A580M
UNS S31603, ASTM A276/A276M (chem.)
AISI 316L, ASTM A478-97, ASTM A479-10
stainless steel Chrom-Nickel-Molybene
drawn, ground, polished, in 3m bars (+50/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested cl. 4
diam. 13.00 mm, tolerance ISO h6
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316 L, DIN EN 10088-3, NF S94 090
UNS S31603, ASTM A276, A479, A493
ASTM A580/A580M, ASTM A959, A478 (chem.)
RoHS conforme
stainless steel Chrom-Nickel
cold drawn, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% eddycurrent crack tested cl. 4
diam. 2.50 mm, tolerance ISO 286-2/h6
bars 3m
ground
h 6
64 kg
800
081 123 - 63.500
2-500
bars-3m
ground
h-6-en
18.000
55413018000
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
as per EN 10088-3 9/05, AISI 316L
per NF S 94 090, ASTM 580/A580M
ASTM A276/A276M, A478, A479
stainless Chrom-Nickel Steel, RoHS conform
annealed, ground, polished, in 3m bars (+50/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested
as per DIN 10277-1,Tab.1, class 4
ultrasonic inspected per DIN 10308, Tab. 1
diam. 18.00 mm, tolerance ISO 286-2/h6
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316L, EN 10088-3, NF S94 090
UNS S31603, ASTM A478, A493, A959
ASTM A276 (chem.) ASTM A580/A580M
stainless Chrom-Nickel-Molybene Steel
precisely cold drawn, hardness ~300 HV
in coils of 20kg +/-5kg
diam. 0.90 mm, tolerance ISO fg6
in spools
drawn
fg 6
1122 kg
0
160 518 - 406.300|231 019 - 715.200
0-900
in-spools
drawn
fg-6-en
20.000
55413020000
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
stainless Chrom-Nickel Steel
AISI 316 L, as per EN 10088-3, UNS S31603
per NF S94 090, ASTM 580/A580M
peeled ground, polished,
in 3m bars (+50/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested cl. 4
diam. 20.00 mm, tolerance ISO 286-2/h6
Chronifer Special 35
AISI 316L, gemäss DIN EN 10088-3
no 1.4435, X2CrNiMo18-14-3
per NFS 94 090, ASTM 580/A580M
ASTM A479-10, ASTM A478
stainless Chrom-Nickel Steel
peeled ground, polished, in 3m bars
end of bars: pointed/chamfered,
100% eddy current crack tested cl. 4
diam. 15.00 mm, tolerance ISO 286-2/h6
Chronifer Special 35
W-Nr. 1.4435, X2CrNiMo18-14-3, AISI 316L
stainless steel Chrom-Nickel
as per DIN EN 10088-3
cold drawn, in 3m bars
diam. 1.35 mm, tolerance ISO h8
bars 3m
drawn
h 8
18 kg
0
250 205 - 18.383
1-350
bars-3m
drawn
h-8-en
2.000
55403102000
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3, AISI 316L
stainless steel Chrom-Nickel
precisely cold drawn,
tensile Rm: 790 – 820 MPa (~240HV)
in 3m bars (+30/0mm)
diam. 2.00 mm, tolerance ISO h7
bars 3m
drawn
h 7
11 kg
0
261 022 - 13.700
2-000
bars-3m
drawn
h-7-en
1.200
55413001200
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
as per EN 10088-3, AISI 316 L
stainless steel Chrom-Nickel
drawn, ground, in 3m bars
diam. 1.20 mm, tolerance ISO h6
bars 3m
ground
h 6
27 kg
0
180 701 - 27.267
1-200
bars-3m
ground
h-6-en
1.500
55400001500
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
as per DIN EN 10088-3, AISI 316L
stainless steel Chrom-Nickel
cold drawn, hardness ~300 HV
in coils for ESCO (10-12kg per coil)
diam. 1.50 mm, tolerance ISO h6
in spools
drawn
h 6
268 kg
0
220 223 - 273.000
1-500
in-spools
drawn
h-6-en
1.100
55400601100
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316L, ASTM A580/A580M
EN 10088-3, NFS 94090, ASTM A276
ASTM A478, A493, A959, UNS S31603
stainless Chrom-Nickel-Molybene Steel
precisely cold drawn, polished,
hardness: ~300 HV, in coils
diam. 1.10 mm, tolerance ISO fg6
in spools
drawn
fg 6
627 kg
0
271 119 - 626.800
1-100
in-spools
drawn
fg-6-en
1.200
55400601200
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316L, ASTM A580/A5480M
EN 10088-3 12/14, UNS S31603, NF S94 090
ASTM A959, ASTM A276 (chem. only)
ASTM A478 and ASTM A493
stainless Chrom-Nickel-Molybdene steel
precisely cold drawn, hardness 320 +/-20 HV
in coils for ESCO (10-12kg/coil)
diam. 1.20 mm, tolerance ISO286-2/fg6
in spools
drawn
fg 6
646 kg
0
150 323 - 269.600|010 323 - 376.800
1-200
in-spools
drawn
fg-6-en
0.400
55402000400
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
as per DIN EN 10088-3, AISI 316L
stainless steel Chrom-Nickel-Mo
cold drawn, in 2m bars
diam. 0.40 mm, tolerance ISO h6
bars 2m
drawn
h 6
2 kg
0
100 708 - 1.793
0-400
bars-2m
drawn
h-6-en
1.800
55400601800
Chronifer Special 35
no. 1.4435, X2CrNiMo18-14-3
AISI 316L, ASTM A580/A580M
EN 10088-3 12/14, NF S94-090, UNS S31603
ASTM A478, A493, ASTM A959
ASTM A276 (chem. only), RoHS konform
stainless Chrom-Nickel-Molybdene steel
cold drawn, hardness ~HV 250
in coils of approx. 10-13jg
diam. 1.80 mm, tolerance ISO fg6
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI/SUS 316L, ASTM A580/A580M
UNS S31603, ASTM A478, A493, A959
ASTM A276 (chem. only)
EN 10088-3, NF S94 090, UNS S31603
stainless Chrom-Nickel-Molybdene steel
precisely cold drawn, HV 250 approx.
in coils of 10-12 kg for ESCO
diam. 1.50 mm, tolerance ISO fg6
in spools
drawn
fg 6
814 kg
0
240 724 - 460.200|070 223 - 353.600
1-500
in-spools
drawn
fg-6-en
2.500
55400602500
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316L, ASTM A580, UNS S31603
EN 10088-3, NF S94 090
stainless Chrom-Nickel-Molybdene steel
cold drawn, in coils, hardness ~HV 250
diam. 2.50 mm, tolerance ISO fg6
in spools
drawn
fg 6
1089 kg
0
261 022 - 800.500|131 016 - 293.100
2-500
in-spools
drawn
fg-6-en
2.000
55400602000
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316L, ASTM A580/A580M, ASTM A276 (chem.)
EN 10088-3 12/14, NF S94-090, UNS S31603
ASTM A478, A493, A959, A580/A580M
stainless Chrom-Nickel-Molybdene steel
cold drawn, hardness: ~250 HV
in coils of apprx. 12-15 kg
diam. 2.00 mm, tolerance ISO 286-2/fg6
in spools
drawn
fg 6
341 kg
0
041 023 - 346.100
2-000
in-spools
drawn
fg-6-en
1.000
55400601000
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316L, ASTM A580/A580M
EN 10088-3, UNS S31603, NF S94 090
ASTM A959, A478, A276 (chem. only)
stainless Chrom-Nickel-Molybene Steel
precisely cold drawn, hardness ~ 300HV
in coils for ESCO
diam. 1.00 mm, tolerance ISO fg6
Chronifer Special 35
W-Nr. 1.4435, X2CrNiMo18-14-3
AISI 316L, ASTM A580/A580M
EN 10088-3, NF S 94090, ASTM A276
ASTM A478, ASTM A493
stainless steel Chrom-Nickel-Mo
precisely cold drawn, in coils
hardness approx. 250HV
diam. 3.20 mm, tolerance ISO fg7
in spools
drawn
fg 7
339 kg
0
230 616 - 237.000|090 211 - 101.800
3-200
in-spools
drawn
fg-7-en
3.500
55400703500
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316L, ASTM A580
EN 10088-3, NF S94 090
stainless Chrom-Nickel-Molybdene steel
cold drawn, in coils, HV 250 approx.
diam. 3.50 mm, tolerance ISO fg7
in spools
drawn
fg 7
711 kg
0
140 411 - 277.600|150 223 - 433.800
3-500
in-spools
drawn
fg-7-en
1.300
55400601300
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316L, ASTM A580/A580M
EN 10088-3, NF S94 090
UNS S31603, ASTM A478, A493, A959
ASTM A276 (chemistry only)
stainless Chrom-Nickel-Molybdene steel
precisely cold drawn, hardness: ~ 250 HV
in coils for ESCO
diam. 1.30 mm, tolerance ISO fg6
in spools
drawn
fg 6
259 kg
0
190 918 - 259.300
1-300
in-spools
drawn
fg-6-en
2.600
55400702600
Chronifer Special 35
EN 10088-3, AISI 316L
no 1.4435, X2CrNiMo18-14-3
stainless steel Chrom-Nickel
precisely cold drawn, in coils, >250 HV
diam. 2.60 mm, tolerance ISO fg7
in spools
drawn
fg 7
488 kg
0
050 111 - 488.000
2-600
in-spools
drawn
fg-7-en
2.600
55413002600
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
as per DIN EN 10088-3, AISI 316 L
as per NF S94-090 (chem. Analysis)
UNS S31603, ASTM A276, A478,
ASTM A479/A479M, A493
stainless steel Chrom-Nickel
cold drawn, ground, polished
in 3m bars (+30/0mm)
end of bars: chamfered
eddycurrent crack tested
diam. 2.60 mm, tolerance ISO h6
bars 3m
ground
h 6
421 kg
0
261 011 - 420.748
2-600
bars-3m
ground
h-6-en
3.100
55403103100
Chronifer Special 35
as per DIN EN 10088-3, AISI 316L
no 1.4435, X2CrNiMo18-14-3
stainless steel Chrom-Nickel
precisely cold drawn, in 3m bars
end of bars: chamfered
diam. 3.10 mm, tolerance ISO h7
bars 3m
drawn
h 7
6 kg
0
230 616 - 5.900
3-100
bars-3m
drawn
h-7-en
1.600
55400601600
Chronifer Special 35
mat.no 1.4435, X2CrNiMo18-14-3
AISI 316L, ASTM A580/A580M, A959
ASTM A276 (chem.), A478, A493 (chem. only)
EN 10088-3,UNS S31603, NF S94090
stainless Chrom-Nickel-Molybdene steel
precisely cold drawn, hardness ~250 HV
in coils for ESCO
diam. 1.60 mm, tolerance ISO 286-2/fg6
in spools
drawn
fg 6
1350 kg
0
070 922 - 636.200|051 023 - 713.400
1-600
in-spools
drawn
fg-6-en
6.350
55413006350
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
as per DIN EN 10088-3, AISI 316L
NF S94-090, ASTM A478,ASTM A479, ASTM A276
stainless Chrom-Nickel Steel, RoHs conform
annealed, cold worked ground, polished,
in 3m bars (+30/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested
diam. 6.35 mm (1/4″), tolerance ISO h6
bars 3m
ground
h 6
465 kg
0
120 711 - 465.000
6-350
bars-3m
ground
h-6-en
21.000
55413021000
Chronifer Special 35 P
no 1.4435, X2CrNiMo18-14-3
AISI 316L, as per EN 10088-3
stainless Chrom-Nickel Steel
extra fine metallurgy VIM/ESU/VAR
solution annealed ground, polished,
in 3m bars (+50/0 mm)
end of bars: pointed, chamfered,
each bar ultrasonic + eddycurrent crack tested
diam. 21.00 mm, tolerance ISO h6
bars 3m
ground
h 6
504 kg
0
100 320 - 496.000|291 019 - 7.600
21-000
bars-3m
ground
h-6-en
9.500
55413009500
Chronifer Special 35
W-Nr. 1.4435, X2CrNiMo18-14-3
as per DIN EN 10088-3 9/05, AISI 316L
NF S 94-090, ASTM A580/A580M
Stainless Chrom-Nickel-Molydene Steel
cold drawn, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% eddy current crack tested
diam. 9.50 mm, tolerance ISO h6
bars 3m
ground
h 6
0 kg
0
0
9-500
bars-3m
ground
h-6-en
3.200
55413003200
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
as per EN 10088-3, NF S 94 090
ASTM A580/A580M, ASTM A959
Type 316L, UNS S31603,ASTM A479/A479M
ASTM A276, ASTM A478 (chem.only)
stainless steel Chrom-Nickel-Molybdène
cold drawn, ground, polished
in 3m bars (+30/0mm)
chamfered at both end of bar
eddycurrent crack tested
diam. 3.20 mm, tolerance ISO h6
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316L, ASTM A580/A580M
EN 10088-3, NF S 94-090, UNS S31603
ASTM A478, ASTM A493, A959
stainless Chrom-Nickel-Molybdene steel
cold drawn, in coils, HV 250 approx.
diam. 1.90 mm, tolerance ISO fg6
in spools
drawn
fg 6
741 kg
0
190 918 - 174.500|130 422 - 566.350
1-900
in-spools
drawn
fg-6-en
2.200
55413002200
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3, AISI 316L
as per EN 10088-3, NF S94 090
UNS S31603, ASTM A276, A478 (chem)
ASTM A580/A580M, ASTM A959
stainless steel Chrom-Nickel
cold drawn, ground, polished
in 3m bars (+30/0mm)
chamfered at both end of bar
eddycurrent crack tested cl. 4
diam. 2.20 mm, tolerance ISO 286-2/h6
bars 3m
ground
h 6
1109 kg
0
091 122 - 759.500|090 120 - 349.610
2-200
bars-3m
ground
h-6-en
5.200
55413005200
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3, AISI 316L
UNS S31603, ASTM A478-97, A497-10
ASTM A276, NF S94 090 (chem.)
stainless steel Chrom-Nickel
as per DIN EN 10088-3, RoHS conforme
cold drawn, ground, polished,
in 3m bars (+40/0mm)
pointed and chamfered end of bars
eddy current crack tested
diam. 5.20 mm, tolerance ISO h6
bars 3m
ground
h 6
684 kg
0
140 513 - 156.600|171 213 - 527.000
5-200
bars-3m
ground
h-6-en
1.400
55400601400
Chronifer Special 35
no. 1.4435, X2CrNiMo18-14-3
UNS S31603, AISI 316L, ASTM A580/580M
per EN 10088-3, NF S94 090, UNS S31603
ASTM A493, A478, A276 (chem. only)
stainless Chrom-Nickel-Molybdene steel
precisely cold drawn, apprx. 250 HV
in coils of 10-13kg weight
diam. 1.40 mm, tolerance ISO fg6
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
as per UNS S31603, NF S94 090
ASTM A478, A479/A479M, A580/A580M
as per DIN EN 10088-3 12/14, AISI 316L
stainless steel Chrom-Nickel
precisely cold drawn,hardness: apprx.250 HV
in coils of apprx. 30-40kg
diam. 4.00 mm, tolerance ISO fg7
in spools
drawn
fg 7
546 kg
0
140 513 - 511.400|290 911 - 34.500
4-000
in-spools
drawn
fg-7-en
1.000
55403101000
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316L, ASTM A580/A580M
EN 10088-3, UNS S31603, NF S94 090
ASTM A959, A478, A276 (chem. only)
stainless steel Chrom-Nickel-Mo
cold drawn, in 3m bars (+/-15mm)
diam. 1.00 mm, tolerance ISO h7
Chronifer Special 35
mat.no 1.4435, X2CrNiMo18-14-3
AISI 316L, ASTM A580, A959
ASTM A276, A478, A493 (chem. only)
as per DIN EN 10088-3 12/14, NF S94-090
stainless Chrom-Nickel-Molybdene steel
cold drawn, hardness ~250 HV
in coils of 20+/-5kg
diam. 1.70 mm, tolerance ISO fg6
in spools
drawn
fg 6
704 kg
0
220 323 - 579.500|161 019 - 124.450
1-700
in-spools
drawn
fg-6-en
2.200
55400602200
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316L, ASTM A580/A580M
UNS S31603, ASTM A959, A478, A493
EN 10088-3, NF S94 090
stainless steel Chrom-Nickel-Molyb.
precisely cold drawn, polished (~250HV)
in coils of 10-13kg
diam. 2.20 mm, tolerance ISO fg6
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316L, EN 10088-3, NF S94 090, A959
ASTM A580/A580M, A493, A478, A276
stainless Chrom-Nickel-Molybene Steel
cold drawn to hardness of apprx. 300HV
in coils for ESCO machines
diam. 0.80 mm, tolerance ISO fg6
in spools
drawn
fg 6
319 kg
0
230 322 - 318.950
0-800
in-spools
drawn
fg-6-en
10.000
55413910000
Chronifer Special 35
as per DIN EN 10088-3 12/14,
X2CrNiMo18-14-3, RoHS conforme
AISI 316L, UNS S31603,
as per NF S94 090, ESU
stainless steel Chrom-Nickel-Moly.
cold drawn, ground, polished,
in bars of 3m (+40/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested, cl. 4
diam. 10.00 mm, tolerance ISO h5
bars 3m
ground
h 5
0 kg
0
0
10-000
bars-3m
ground
h-5-en
1.200
55403101200
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316L, ASTM A580/A580M
EN 10088-3, UNS S31603, NF S94 090
ASTM A959, A478, A276 (chem. only)
stainless steel Chrom-Nickel-Mo
cold drawn, in 2m bars (+/-15mm)
diam. 1.20 mm, tolerance ISO h7
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
as per EN 10088-3, UNS S31603
AISI 316L, NF S94 090,
ASTM A580/A580M, ASTM A959
stainless Chrom-Nickel-Molybdene Steel
cold drawn, in 3m bars (+30/0mm)
pointed/chamfered
diam. 1.80 mm, tolerance ISO h7
bars 3m
drawn
h 7
41 kg
0
240 321 - 2.560|040 523 - 38.800
1-800
bars-3m
drawn
h-7-en
1.400
55403101400
Chronifer Special 35
no. 1.4435, X2CrNiMo18-14-3,
AISI 316 L, RoHS conforme
as per EN 10088-3, UNS S31603
NF S94 090, ASTM A580/A580M, A959
stainless steel Chrom-Nickel
cold drawn, in 3m bars
diam. 1.40 mm, tolerance ISO h7
bars 3m
drawn
h 7
221 kg
0
230 621 - 241.115
1-400
bars-3m
drawn
h-7-en
1.800
55403001800
Chronifer Special 35 S
no 1.4435+S
stainless steel Chrom-Nickel
preciselycold drawn, in 3m bars
end of bars pointed, chamfered
diam. 1.80 mm, tolerance ISO h6
bars 3m
drawn
h 6
272 kg
0
300 322 - 271.900
1-800
bars-3m
drawn
h-6-en
1.600
55403101600
Chronifer Special 35
W-Nr. 1.4435, X2CrNiMo18-14-3
gemäss EN 10088-3, NF S94 090
ASTM A580/A580M, ASTM A959
AISI 316L
stainless steel Chrom-Nickel
cold drawn, in 3m bars
diam. 1.60 mm, tolerance ISO h7
bars 3m
drawn
h 7
48 kg
0
070 922 - 47.576
1-600
bars-3m
drawn
h-7-en
4.000
55411004000
Chronifer Special 35 AISI 316 L
mat.no. 1.4435, X2CrNiMo18-14-3
as per DIN EN 10088-3 9/05
NF S 94-090, ASTM A580/A580M
UNS S31603, ASTM A276, A478
ASTM A479/A479M, A493
stainless steel Chrom-Nickel-Moly.
cold drawn, ground, polished,
in 1.5m bars (+15/0mm)
pointed/chamfered, eddy current tested
diam. 4.00 mm, tolerance ISO h6
special length
ground
h 6
0 kg
0
0
4-000
special-length
ground
h-6-en
5.000
55411005000
Chronifer Special 35
mat.no. 1.4435, X2CrNiMo18-14-3
as per DIN EN 10088-3, RoHS conforme
NF S 94-090, ASTM A580/A580M
UNS S31603, ASTM A276, A478
ASTM A479/A479M, A493, AISI 316L
stainless steel Chrom-Nickel-Moly.
cold drawn, ground, polished,
in 1.5m bars (+20/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested
diam. 5.00 mm, tolerance ISO h6
special length
ground
h 6
0 kg
0
0
5-000
special-length
ground
h-6-en
17.000
55413017000
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
stainless Chrom-Nickel Steel
as per EN 10088-3 9/05, AISI 316L
per NF S 94 090, ASTM 580/A580M
ASTM A276-08a, A478-97, A479-10
peeled ground, polished, in 3m bars
end of bars: pointed/chamfered,
100% eddy current crack tested
as per DIN 10277-1,Tab.1, class 4
diam. 17.00 mm, tolerance ISO h6
bars 3m
ground
h 6
756 kg
0
210 115 - 212.500|190 919 - 543.000
17-000
bars-3m
ground
h-6-en
35.000
55413235000
Chronifer Special 35 AISI 316 L
no 1.4435, X2CrNiMo18-14-3
as per ASTM A276-10, A479-12
as per UNS S31600
Stainless Chrom-Nickel Steel
warmworked, ground, in 3m bars
diam. 35.00 mm, tolerance ISO h8
bars 3m
ground
h 8
0 kg
0
0
35-000
bars-3m
ground
h-8-en
1.200
55403001200
Chronifer Special 35
AISI 316 L, as per DIN EN 10088-3
no 1.4435, X2CrNiMo18-14-3
stainless steel Chrom-Nickel
precisely cold drawn, in 3m bars
diam. 1.20 mm, tolerance ISO h6
bars 3m
drawn
h 6
-142 kg
0
270 814 - 8.273
1-200
bars-3m
drawn
h-6-en
1.700
55403001700
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
as per DIN EN 10088-3, AISI 316L
stainless Chrom-Nickel-Mo Steel
cold drawn, tensile strength 1050-1150MPa
in 3m bars (+/- 10mm)
end of bars: pointed, chamfered
diam. 1.70 mm, tolerance ISO h6
bars 3m
drawn
h 6
11 kg
0
210 819 - 11.059
1-700
bars-3m
drawn
h-6-en
1.700
55403101700
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
as per DIN EN 10088-3, AISI 316 L
stainless Chrom-Nickel Steel
cold drawn, in 3m bars
pointed/chamfered
diam. 1.70 mm, tolerance ISO h7
bars 3m
drawn
h 7
28 kg
0
161 019 - 27.628
1-700
bars-3m
drawn
h-7-en
4.300
55413004300
Chronifer Special 35 Aisi 316 L
no 1.4435, X2CrNiMo18-14-3
as per EN 10088-3, as per NF S94 090
ASTM A580/A580M, ASTM A959
UNS S31603, ASTM A479/A479M
ASTM A276, ASTM A478
stainless steel Chrom-Nickel
drawn, ground, polished,
in 3m bars (+40/0mm)
pointed/chamfered ends
eddy current crack tested
diam. 4.30 mm, tolerance ISO h6
bars 3m
ground
h 6
315 kg
0
220 415 - 315.200
4-300
bars-3m
ground
h-6-en
1.100
55403101100
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316L, as per DIN EN 10088-3
stainless steel Chrom-Nickel
cold drawn, in 3m bars
diam. 1.10 mm, tolerance ISO h7
bars 3m
drawn
h 7
31 kg
0
271 119 - 31.100
1-100
bars-3m
drawn
h-7-en
1.000
55403001000
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
as per EN 10088-3, AISI 316 L
stainless steel Chrom-Nickel
cold drawn, in 3m bars
diam. 1.00 mm, tolerance ISO h6
bars 3m
drawn
h 6
13 kg
0
170 811 - 12.513
1-000
bars-3m
drawn
h-6-en
7.000
55411007000
Chronifer Special 35 AISI 316 L
mat.no. 1.4435, X2CrNiMo18-14-3
as per DIN EN 10088-3 9/05
NF S 94-090, ASTM A580/A580M
UNS S31603, ASTM A276, A478
ASTM A479/A479M, A493
stainless steel Chrom-Nickel-Moly.
cold drawn, ground, polished,
in 1.5m bars (+20/0mm)
pointed/chamfered, eddy current tested
diam. 7.00 mm, tolerance ISO h6
special length
ground
h 6
334 kg
0
150 818 - 333.600
7-000
special-length
ground
h-6-en
3.180
55413003180
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
as per EN 10088-3 12/14, NF S 94 090
ASTM A580/A580M, ASTM A959
Type 316L, UNS S31603
ASTM A276, ASTM A478 (chem.only)
stainless steel Chrom-Nickel-Molybdène
RoHS Reach conform
cold drawn, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% eddycurrent crack tested cl. 4
diam. 3.18 mm, tolerance ISO h6
bars 3m
ground
h 6
272 kg
0
301 122 - 272.200
3-180
bars-3m
ground
h-6-en
1.500
55403001500
Chronifer Special 35
no. 1.4435, X2CrNiMo18-14-3
as per DIN EN 10088-3, AISI 316 L
stainless Chrom-Nickel-Mo Steel
cold drawn, in 3m bars (+30/0 mm)
tensile strength Rm 890-1050 MPa (300+/-30 HV)
end of bars: pointed, chamfered
diam. 1.50 mm, tolerance ISO h6
bars 3m
drawn
h 6
50 kg
0
250 315 - 50.473
1-500
bars-3m
drawn
h-6-en
0.275
55405800275
Chronifer Special 35
AISI 316L, mat. no 1.4435, X2CrNiMo18-14-3
round tubes, welded, redrawn, hard
in 3m lengths +/- 50mm
surface finish OD and ID: N5
tolerance OD and ID: 0/-0.02mm
2.00 x 1.45 mm (wall 0.275 mm)
tubes
drawn
spec.
202 kg
0
291 116 - 202.000
0-275
tubes
drawn
spec-en
2.400
55400602400
Chronifer Special 35
no. 1.4435, X2CrNiMo18-14-3
AISI 316L, ASTM A580/A580M
EN 10088-3, NFS 94090, UNS S31603
stainless Chrom-Nickel-Molybdene steel
cold drawn, in coils for ESCO
hardness: ~350 HV
diam. 2.40 mm, tolerance ISO fg6
in spools
drawn
fg 6
118 kg
0
041 018 - 117.600
2-400
in-spools
drawn
fg-6-en
2.500
554130025001
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316 L, DIN EN 10088-3,
NF S94 090, UNS S31603, ESR remelted
stainless steel Chrom-Nickel
cold drawn, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% eddycurrent crack tested cl. 4
diam. 2.50 mm, tolerance ISO h6
bars 3m
ground
h 6
317 kg
0
310 118 - 316.800
2-500
bars-3m
ground
h-6-en
1.400
554006014001
Chronifer Special 35
no mat. 1.4435, X2CrNiMo18-14-3
UNS S31603, AISI 316L, ESR remelted
per EN 10088-3, NF S 94 090, UNS S31603
stainless Chrom-Nickel-Molybdene steel
precisely cold drawn, apprx. 250 HV
in coils for ESCO
diam. 1.40 mm, tolerance ISO fg6
in spools
drawn
fg 6
77 kg
0
130 917 - 76.500
1-400
in-spools
drawn
fg-6-en
1.800
55402101800
Chronifer Special 35 Aisi 316 L
no 1.4435, X2CrNiMo18-14-3
as per EN 10088-3, UNS S31603
NF S94 090, ASTM A580/A580M, A959
stainless steel Chrom-Nickel
cold drawn, in 2m bars
diam. 1.80 mm, tolerance ISO h7
bars 2m
drawn
h 7
20 kg
0
210 617 - 19.838
1-800
bars-2m
drawn
h-7-en
1.950
55400801950
Chronifer Special 35 P
no 1.4435, X2CrNiMo18-14-3
AISI 316L, VIM/ESU/VAR remelted
as per DIN EN 10088-3 12/14
chemical analyses as per NF S94 090
stainless Chrom-Nickel-Molybdene steel
superpur, ferritefree
cold drawn, fully annealed, surface matt
tensile strength Rm< 610MPa,grain 6 and finer
on spools for redrawing (200-250kg each)
diam. 1.95 mm, tolerance ISO js9 (+/- 0.012)
in spools
drawn
spec.
0 kg
0
0
1-950
in-spools
drawn
spec-en
1.600
55400001600
Chronifer Special 35
mat.no 1.4435, X2CrNiMo18-14-3
AISI 316L, ASTM A580, A959
ASTM A276, A478, A493 (chem. only)
as per DIN EN 10088-3, NF S 94-090
stainless Chrom-Nickel-Molybdene steel
cold drawn, in coils, HV 300 approx.
diam. 1.60 mm, tolerance ISO h6
in spools
drawn
h 6
9 kg
0
250 315 - 9.200
1-600
in-spools
drawn
h-6-en
1.400
554000014001
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316L, as per DIN EN 10088-3
stainless steel Chrom-Nickel-Mo
cold drawn, in coils of apprx. 10 kg
hardness ~280 HV
diam. 1.40 mm, tolerance ISO h6
in spools
drawn
h 6
23 kg
0
160 420 - 22.900
1-400
in-spools
drawn
h-6-en
1.200
554006012001
Chronifer Special 35
no mat. 1.4435, X2CrNiMo18-14-3
UNS S31603, AISI 316L, ESR remelted
per EN 10088-3, NF S 94 090, UNS S31603
stainless Chrom-Nickel-Molybdene steel
cold drawn, in coils
apprx. 300 HV
diam. 1.20 mm, tolerance ISO fg6
in spools
drawn
fg 6
0 kg
0
0
1-200
in-spools
drawn
fg-6-en
1.300
55403101300
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316L, ASTM A580/A580M
EN 10088-3, NF S94 090
UNS S31603, ASTM A478, A493, A959
ASTM A276 (chemistry only)
stainless steel Chrom-Nickel
cold drawn, in 3m bars
diam. 1.30 mm, tolerance ISO h7
bars 3m
drawn
h 7
-88 kg
0
190 918 - 61.783
1-300
bars-3m
drawn
h-7-en
0.970
55400000970
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316L, ASTM A580/A580M
EN 10088-3, UNS S31603, NF S94 090
ASTM A959, A478, A276 (chem. only)
stainless Chrom-Nickel-Molybene Steel
precisely cold drawn, hardness 270+/-30HV
in coils of 10-12kg, for ESCO
diam. 0.97 mm, tolerance ISO h6
in spools
drawn
h 6
0 kg
0
0
0-970
in-spools
drawn
h-6-en
0.475
55405800475
Chronifer Special 35
AISI 316L, mat. no 1.4435, X2CrNiMo18-14-3
round tubes, welded, redrawn,
hardness 350 HV +/- 25%
in 3m lengths +/- 50mm
surface finish OD and ID: N5
tolerance OD: 0/-0.02 mm
tolerance ID: +/- 0.010 mm
round 2.50 x 1.55 mm (Wall 0.475 mm)
tubes
drawn
spec.
517 kg
0
010 722 - 517.000
0-475
tubes
drawn
spec-en
1.300
554000013002
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316 L, DIN EN 10088-3
stainless steel Chrom-Nickel
cold drawn, hardness ~250 HV
in coils of 10 – 13 kg
diam. 1.30 mm, tolerance ISO h6
in spools
drawn
h 6
0 kg
0
0
1-300
in-spools
drawn
h-6-en
1.400
55403901400
Chronifer Special 35 P
no. 1.4435, X2CrNiMo18-14-3
AISI 316L, VIM/ESU/VAR remelted
as per DIN EN 10088-3 12/14
chemical analyses as per NF S94 090
stainless Chrom-Nickel-Molybdene steel
superpur, ferritefree
cold drawn, in 3m bars
pointed and chamfered
diam. 1.40 mm, tolerance ISO h5
bars 3m
drawn
h 5
74 kg
0
201 217 - 73.714
1-400
bars-3m
drawn
h-5-en
1.500
55403901500
Chronifer Special 35 P
no. 1.4435, X2CrNiMo18-14-3
AISI 316L, VIM/ESU/VAR remelted
as per DIN EN 10088-3 12/14
chemical analyses as per NF S94 090
stainless Chrom-Nickel-Molybdene steel
superpur, ferritefree
cold drawn, in 3m bars
pointed and chamfered
diam. 1.50 mm, tolerance ISO h5
bars 3m
drawn
h 5
109 kg
0
201 217 - 108.974
1-500
bars-3m
drawn
h-5-en
1.700
55403901700
Chronifer Special 35 P
no. 1.4435, X2CrNiMo18-14-3
AISI 316L, VIM/ESU/VAR remelted
as per DIN EN 10088-3 12/14
chemical analyses as per NF S94 090
stainless Chrom-Nickel-Molybdene steel
superpur, ferritefree
cold drawn, in 3m bars
pointed and chamfered
diam. 1.70 mm, tolerance ISO h5
bars 3m
drawn
h 5
80 kg
0
230 118 - 79.500
1-700
bars-3m
drawn
h-5-en
1.800
55403901800
Chronifer Special 35 P
no. 1.4435, X2CrNiMo18-14-3
AISI 316L, VIM/ESU/VAR remelted
as per DIN EN 10088-3 12/14
chemical analyses as per NF S94 090
stainless Chrom-Nickel-Molybdene steel
superpur, ferritefree
cold drawn, in 3m bars
pointed and chamfered
diam. 1.80 mm, tolerance ISO h5
bars 3m
drawn
h 5
154 kg
0
201 217 - 123.000|230 118 - 30.880
1-800
bars-3m
drawn
h-5-en
1.200
554130012001
Chronifer Special 35 P
no. 1.4435, X2CrNiMo18-14-3
AISI 316L, VIM/ESU/VAR remelted
as per DIN EN 10088-3 12/14
chemical analyses as per NF S94 090
stainless Chrom-Nickel-Molybdene steel
superpur, ferritefree
cold drawn, ground, in 3m bars
pointed and chamfered
diam. 1.20 mm, tolerance ISO h6
bars 3m
ground
h 6
0 kg
0
0
1-200
bars-3m
ground
h-6-en
0.800
554006008001
Chronifer Special 35
no. 1.4435, X2CrNiMo18-14-3
AISI 316L, EN 10088-3, NF S94 090, A959
ASTM A580/A580M, A493, A478, A276
stainless Chrom-Nickel-Molybene Steel
cold drawn, on spool
hardness apprx. 220HV
diam. 0.80 mm, tolerance ISO fg6
in spools
drawn
fg 6
3 kg
0
220 513 - 3.400
0-800
in-spools
drawn
fg-6-en
1.000
554030010001
Chronifer Special 35 P
no. 1.4435, X2CrNiMo18-14-3
AISI 316L, VIM/ESU/VAR remelted
as per DIN EN 10088-3 12/14
chemical analyses as per NF S94 090
stainless Chrom-Nickel-Molybdene steel
superpure, ferritefree
cold drawn, in 3m bars
diam. 1.00 mm, tolerance ISO h6
bars 3m
drawn
h 6
0 kg
0
0
1-000
bars-3m
drawn
h-6-en
1.000
554008010001
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316L, ASTM A580/A580M
EN 10088-3, NFS 94090, ASTM A276
ASTM A478, A493, A959, UNS S31603
stainless Chrom-Nickel-Molybene Steel
cold drawn, on spool
hardness: 250-300 HV.
diam. 1.00 mm, tolerance ISO k7 (0/+0.010)
in spools
drawn
spec.
13 kg
0
181 115 - 13.200
1-000
in-spools
drawn
spec-en
1.400
554006014002
Chronifer Special 35 P
no 1.4435, X2CrNiMo18-14-3
AISI 316L, VIM/ESU/VAR remelted
as per DIN EN 10088-3 12/14
chemical analyses as per NF S94 090
stainless Chrom-Nickel-Molybdene steel
superpur, ferritefree
cold drawn, in coils
diam. 1.40 mm, tolerance ISO fg6
in spools
drawn
fg 6
23 kg
0
201 217 - 23.000
1-400
in-spools
drawn
fg-6-en
1.800
554006018001
Chronifer Special 35 P
W-Nr. 1.4435, X2CrNiMo18-14-3
AISI 316L, VIM/ESR/VAR remelted
EN 10088-3 12/14, NF S94-090 (chem. Analyse)
stainless Chrom-Nickel-Molybdene steel
cold drawn, in coils, HV 250 approx.
diam. 1.80 mm, tolerance ISO fg6
in spools
drawn
fg 6
304 kg
0
220 317 - 303.900
1-800
in-spools
drawn
fg-6-en
1.500
554030015001
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
as per DIN EN 10088-3, AISI 316 L
stainless Chrom-Nickel-Mo Steel
cold drawn, in 3m bars
Rm 750 – 900 MPa (250 HV +/-25)
diam. 1.50 mm, tolerance ISO h6
bars 3m
drawn
h 6
0 kg
0
0
1-500
bars-3m
drawn
h-6-en
1.800
554006018002
Chronifer Special 35
no. 1.4435, X2CrNiMo18-14-3
AISI 316L, ASTM A580/A580M
EN 10088-3 12/14, NF S 94-090, UNS S31603
ASTM A478, A493, ASTM A959
ASTM A276 (chem. only)
stainless Chrom-Nickel-Molybdene steel
precisely cold drawn, hardness ~300+/-30HV
in coils for ESCO machines
diam. 1.80 mm, tolerance ISO fg6
in spools
drawn
fg 6
48 kg
0
261 022 - 48.200
1-800
in-spools
drawn
fg-6-en
0.860
55400800860
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316L, ASTM A580/A580M
EN 10088-3, UNS S31603, NF S94 090
ASTM A959, A478, A276 (chem. only)
stainless Chrom-Nickel-Molybene Steel
precisely cold drawn, hardness ~ 300HV
in coils for ESCO
diam. 0.86 mm, tolerance ISO js7
in spools
drawn
spec.
0 kg
0
0
0-860
in-spools
drawn
spec-en
1.800
554030018001
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
as per EN 10088-3, UNS S31603
AISI 316L, NF S94 090,
ASTM A580/A580M, ASTM A959
stainless Chrom-Nickel-Molybdene Steel
precisely cold drawn, hardness ~300 HV
in 3m bars (+20/0mm)
diam. 1.80 mm, tolerance ISO h6
bars 3m
drawn
h 6
22 kg
0
210 819 - 22.400
1-800
bars-3m
drawn
h-6-en
3.300
554130033001
Chronifer Special 35 S
no 1.4435+S
stainless steel Chrom-Nickel
preciselycold drawn, ground, in 3m bars
end of bars pointed, chamfered
diam. 3.30 mm, tolerance ISO h6
bars 3m
ground
h 6
55 kg
0
080 519 - 55.100
3-300
bars-3m
ground
h-6-en
1.600
554030016001
Chronifer Special 35 S
German no 1.4435+S
stainless steel Chrom-Nickel-Mo Steel
preciselycold drawn, in 3m bars (+20/0mm)
end of bars pointed, chamfered
diam. 1.60 mm, tolerance ISO h6
bars 3m
drawn
h 6
40 kg
0
280 819 - 39.500
1-600
bars-3m
drawn
h-6-en
0.800
554006008002
Chronifer Special 35 P
no 1.4435, X2CrNiMo18-14-3
AISI 316L, VIM/ESU/VAR remelted
as per DIN EN 10088-3 12/14
chemical analyses as per NF S94 090
stainless Chrom-Nickel-Molybdene steel
superpur, ferritefree
cold drawn, (hardness ~300HV), in coils
diam. 0.80 mm, tolerance ISO fg6
in spools
drawn
fg 6
0 kg
0
0
0-800
in-spools
drawn
fg-6-en
1.240
55400001240
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316L, ASTM A580/A580M
EN 10088-3, NF S94 090
UNS S31603, ASTM A478, A493, A959
ASTM A276 (chemistry only)
stainless Chrom-Nickel-Molybdene steel
precisely cold drawn, hardness: 280+/-30 HV
in coils for ESCO
diam. 1.24 mm, tolerance ISO h6
in spools
drawn
h 6
0 kg
0
0
1-240
in-spools
drawn
h-6-en
9.500
55411009500
Chronifer Special 35
as per DIN EN 10088-3 12/14,
as per NF S94 090, ESR
AISI 316L UNS S31603
stainless steel Chrom-Nickel-Moly.
cold drawn, ground, polished,
in 1.5m bars (+/- 20 mm)
end of bars: pointed/chamfered,
100% eddy current crack tested, cl. 4
diam. 9.50 mm, tolerance ISO h6
special length
ground
h 6
0 kg
0
0
9-500
special-length
ground
h-6-en
10.500
55413010500
Chronifer Special 35 Aisi 316 L
as per 1.4435, X2CrNiMo18-14-3, AISI 316L
per EN 10088-3 9/05, NF S94-090,
UNS S31603, ASTM A276/A276M
stainless steel Chrom-Nickel-Mo
drawn, ground, polished,
in 3m bars (+30/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested
diam. 10.50 mm, tolerance ISO h6
bars 3m
ground
h 6
0 kg
0
0
10-500
bars-3m
ground
h-6-en
1.100
55413001100
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
as per EN 10088-3, AISI 316 L
stainless steel Chrom-Nickel
drawn, ground, in 3m bars
diam. 1.10 mm, tolerance ISO h6
bars 3m
ground
h 6
0 kg
0
0
1-100
bars-3m
ground
h-6-en
0.125
55405800130
Chronifer Special 35
W-Nr. 1.4435, X2CrNiMo18-14-3
DIN EN 10088-3, AISI 316 L
seamless tubes, cold worked (Ra 0.8my max.)
in bars of 3m (+100/0mm)
hardness 250 +/-25 HV
wallthickness 0.125 mm
rund 1.30+0.01/-0.02 x 1.05+0/-0.04mm
tubes
drawn
spec.
146 kg
0
201 223 - 146.000
0-125
tubes
drawn
spec-en
0.400
55400100400
Chronifer Special 35
no. 1.4435, X2CrNiMo18-14-3
AISI 316L, EN 10088-3, NF S94 090,
stainless Chrom-Nickel-Molybene Steel
cold drawn, annealed, on spools SD355K
diam. 0.40 mm, tolerance ISO h7
in spools
drawn
h 7
149 kg
0
231 121 - 148.796
0-400
in-spools
drawn
h-7-en
1.900
554006019001
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316L, ASTM A580/A580M
EN 10088-3, NF S 94-090, UNS S31603
ASTM A478, ASTM A493, A959
stainless Chrom-Nickel-Molybdene steel
cold drawn, in coils, ~HV 370
diam. 1.90 mm, tolerance ISO fg6
in spools
drawn
fg 6
0 kg
0
0
1-900
in-spools
drawn
fg-6-en
1.600
55400901600
Chronifer Special 35
mat.no 1.4435, X2CrNiMo18-14-3
AISI 316L, ASTM A580, A959
ASTM A276, A478, A493 (chem. only)
as per DIN EN 10088-3 12/14, NF S94-090
stainless Chrom-Nickel-Molybdene steel
precisely cold drawn, hardness ~280 +/-20 HV
in coils of 10 – 13 kg
diam. 1.60 mm, tolerance ISO h5
in spools
drawn
h 5
0 kg
0
0
1-600
in-spools
drawn
h-5-en
1.400
55400901400
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316L, as per DIN EN 10088-3
stainless steel Chrom-Nickel-Mo
cold drawn, in coils of apprx. 10 kg
hardness ~280 HV
diam. 1.40 mm, tolerance ISO h5
in spools
drawn
h 5
0 kg
0
0
1-400
in-spools
drawn
h-5-en
0.370
55400100370
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316L, EN 10088-3, NF S94 090, A959
ASTM A580/A580M, A493, A478, A276
stainless Chrom-Nickel-Molybene Steel
cold drawn, tensile strength Rm ~800 MPa
on spools type SH370 (~6kg/spool)
diam. 0.37 mm, tolerance ISO h7
in spools
drawn
h 7
0 kg
0
0
0-370
in-spools
drawn
h-7-en
1.500
554130015001
Chronifer Special 35
EN 10088-3 12/14, as per NF S94-090,
UNS S31603, ASTM A276/A276M
ASTM A478, A479/A479M
ASTM A959, A493, A478
stainless steel Chrom-Nickel-Mo
RoHS, Reach conforme
precisely cold drawn, ground polished
tensile strength Rm 1100-1250 MPa
in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% eddycurrent crack testes cl. 4
diam. 1.50 mm, tolerance ISO 286-2/h6
bars 3m
ground
h 6
256 kg
0
170 124 - 255.800
1-500
bars-3m
ground
h-6-en
0.901
55400800901
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
AISI 316L, EN 10088-3, NF S94 090
UNS S31603, ASTM A478, A493, A959
ASTM A276 (chem.) ASTM A580/A580M
stainless Chrom-Nickel-Molybene Steel
cold drawn, in coils
diam. 0.901 mm, tolerance ISO js6 (+/-0.003)
in spools
drawn
spec.
0 kg
0
0
0-901
in-spools
drawn
spec-en
1.600
55402101600
hronifer Special 35
no. 1.4435, X2CrNiMo18-14-3
EN 10088-3, NF S94 090
ASTM A580/A580M, ASTM A959
AISI 316L
stainless steel Chrom-Nickel
cold drawn, in 2m bars
diam. 1.60 mm, tolerance ISO h7
bars 2m
drawn
h 7
21 kg
0
230 322 - 21.400
1-600
bars-2m
drawn
h-7-en
2.350
55413002350
Chronifer Special 35
no. 1.4435, X2CrNiMo18-14-3
as per DIN EN 10088-3, AISI 316 L
stainless steel Chrom-Nickel
drawn, ground, polished
in 3m bars (+30/0mm)
pointed and chamfered end of bars
100% eddycurrent crack tested
diam. 2.35 mm, tolerance ISO h6
bars 3m
ground
h 6
1 kg
0
160 408 - 0.550
2-350
bars-3m
ground
h-6-en
1.600
55403001600
Chronifer Special 35
no. 1.4435, X2CrNiMo18-14-3
as per EN 10088-3, UNS S31603
AISI 316L, NF S94 090,
ASTM A580/A580M, ASTM A959
stainless Chrom-Nickel-Molybdene Steel
cold drawn, in 3m bars (+30/0mm)
pointed/chamfered
diam. 1.60 mm, tolerance ISO h6
bars 3m
drawn
h 6
201 kg
0
300 322 - 121.553|040 523 - 89.500
1-600
bars-3m
drawn
h-6-en
1.850
55400601850
Chronifer Special 35
no. 1.4435, X2CrNiMo18-14-3 AISI 316L
ASTM A580/A580M, ASTM A276 (chem.)
EN 10088-3 12/14, NF S94-090, UNS S31603
ASTM A478, A493, A959, A580/A580M
stainless Chrom-Nickel-Molybdene steel
cold drawn, in coils
diam. 1.85 mm, tolerance ISO 286-2/fg6
in spools
drawn
fg 6
0 kg
0
0
1-850
in-spools
drawn
fg-6-en
1.350
554005013501
Chronifer Special 35
as per EN 10088-3, AISI 316L
no 1.4435, X2CrNiMo18-14-3
stainless steel Chrom-Nickel
precisely cold drawn,
in coils, annealed,
diam. 1.35 mm, tolerance ISO fg8
in spools
drawn
fg 8
0 kg
0
0
1-350
in-spools
drawn
fg-8-en
0.275
554058002751
Chronifer Special 35
AISI 316L, mat. no 1.4435, X2CrNiMo18-14-3
round tubes, welded, redrawn, hard
in 3m lengths +/- 50mm
surface finish OD and ID: N5
tolerance OD and ID: 0/-0.02mm
1.45 x 0.90 mm mm (wall 0.275 mm)
tubes
drawn
spec.
24 kg
0
060 325 - 24.000
0-275
tubes
drawn
spec-en
0.500
55400600500
Chronifer Special 35
no 1.4435, X2CrNiMo18-14-3
as per DIN EN 10088-3, AISI 316 L
stainless steel Chrom-Nickel
precisely cold drawn, in spools SH 390 K
tensile strength 900 – 1150 Mpa
diam. 0.50 mm, tolerance ISO fg6
in spools
drawn
fg 6
0 kg
0
0
0-500
in-spools
drawn
fg-6-en
3.350
55413003350
Chronifer Special 35
mat.no. 1.4435, X2CrNiMo18-14-3
per EN 10088-3 12/14, NF S94 090,
ASTM A580/A580M, ASTM A959, (chem.)
UNS S31603, AISI 316 L, RoHS conforme
ASTM A276, ASTM A478 (chem.)
ASTM A479/A479M, ASTM A493
stainless steel Chrom-Nickel-Mo
drawn, ground, polished,
in 3m bars (+30/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested cl. 4
diam. 3.35 mm, tolerance ISO 286-2/h6
bars 3m
ground
h 6
0 kg
0
0
3-350
bars-3m
ground
h-6-en
9.520
55413009520
Chronifer Special 35
mat.no. 1.4435, X2CrNiMo18-14-3
as per DIN EN 10088-3 12/14, UNS S31603
NF S94-090, ASTM ASTM A478, AISI 316L
ASTM A479/A479M-17, ASTM A276/A276M-17,
stainless steel Chrom-Nickel, RoHS conforme
drawn, ground, polished, in 3m bars (+30/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested cl. 4
diam. 9.52 mm (3/8”), tolerance ISO 286-2/h6
bars 3m
ground
h 6
-6 kg
0
0
9-520
bars-3m
ground
h-6-en
2.300
55400502300
Brief description
Klein designation:
CHRONIFER SPECIAL 35
Class of steels:
1.4435 / AISI 316L – Austenitic stainless steel
Material number:
1.4435
Standard UNS:
RoHS 2 – 2011/65/EU:
Machinability:
Hardening capability:
Forming:
Cold working hardening:
Polishing ability:
Magnetism:
Corrosion resistance:
Uses:
This steel is used in numerous branches of various industries, such as the chemical, pharmaceutical, food, and oil-related, paper and textile industries. It is widely used in the fine mechanical engineering and the mechatronic industries. It is also used for components of watch movements as well as for the watch exterior.
The high Cr, Ni and Mo contents of this steel make it nobler than the 1.4404 Grade. These additions provide a better corrosion resistance in non-oxidizing medium or non-containing halogen solutions. Its low S content reduces markedly the risk to be subjected to pitting corrosion. Similarly, its low C content renders it less subject to inter-cristaline corrosion after long exposures to in the 450 – 650°C temperature range. Its microstructural cleanliness and its surface qualities make it a material of choice for medical applications. It cannot be thermally hardened, but can be strengthened by cold working. In some cases it can exhibit
traces of δ (Delta) Ferrite as well as traces α (Alpha) Martensite after an intensive cold work. This steel can be easily welded, polished and be continuously used up to 400°C.
