Moderate to difficult, depending on the degree of cold work
Hardening capability:
Depending on the degree of cold work, tensile strength up to 2500 MPa
Forming:
Ductile, easily formable
Cold working hardening:
Strength increases with cold working
Polishing ability:
Very good
Magnetism:
Non-magnetic
Corrosion resistance:
Very good
Uses:
Implantable springs, strictly non-magnetic areas, Petrochemicals, highest demands on corrosion resistance, Elevator springs (similar to Nivaflex). Aerospace industry, etc.
PHYNOX
high quality spring steel,
Co-Cr-Ni-Mo alloy implant quality
German no 2.4711, UNS R30003
ISO 5832-7 , ASTM 1058, Grade 1
AMS 5833D – 5834,
cold drawn to tensile, Rm 1750-1900 MPa,
in coils of apprx. 30kg
diam. 1.50 mm, tolerance ISO h8
in spools
drawn
h 8
105 kg
0
100 424 - 104.500
1-500
in-spools
drawn
h-8-en
2.500
55900202500
PHYNOX
Co-Cr-Ni-Mo Spring quality
W.Nr. 2.4711, AMS 5833 – 5834
ASTM 1058, ISO 5832-7, UNS R30003
cold drawn, annealed
tensiles strength: Rm 1000 – 1200 MPa
in coils of 20-30kg,
diam. 2.50 mm, tolerance ISO h8
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
UNS R30003, AMS 5833 – 5834
cold drawn, hard, in coils/spool
tensile strength Rm >1900 MPa
diam. 1.20 mm, tolerance ISO h8
in spools
drawn
h 8
5 kg
0
230 216 - 4.550
1-200
in-spools
drawn
h-8-en
1.700
55901201700
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
cold drawn, hard, tensile > 1145 Mpa
in 2.80 m bars
diam. 1.70 mm, tolerance ISO h8
special length
drawn
h 8
19 kg
0
140 307 - 18.549
1-700
special-length
drawn
h-8-en
1.180
55903201180
PHYNOX
high quality spring steel
CW.Nr. 2.4711, AMS 5833 – 5834
ASTM 1058, ISO 5832-7
UNS R30003, AFNOR NF S90 – 403
cold drawn, hard, tensile Rm: 1400 – 1700 MPa
straight bars of 2.8m
diam. 1.18 mm, tolerance ISO h8
bars 3m
drawn
h 8
0 kg
0
0
1-180
bars-3m
drawn
h-8-en
1.400
55903201400
PHYNOX
high quality spring steel
no. mat. 2.4711, AMS 5833 – 5834
ASTM 1058, ISO 5832-7
UNS R30003, AFNOR NF S90 – 403
cold drawn, hard, in 3m bars
tensile strength Rm: 1400 – 1700 MPa
diam. 1.40 mm, tolerance ISO h8
bars 3m
drawn
h 8
9 kg
0
150 307 - 9.400
1-400
bars-3m
drawn
h-8-en
1.700
55900201700
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058 (chem only)
cold drawn, Rm 1000-1250 Mpa
on spool 20 – 30 kg
diam. 1.70 mm, tolerance ISO h8
in spools
drawn
h 8
58 kg
230
170 724 - 57.900
1-700
in-spools
drawn
h-8-en
1.200
55903201200
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7, ASTM 1058
cold drawn, hard, Rm: >1600 MPa
in 3m bars
diam. 1.20 mm, tolerance ISO h8
bars 3m
drawn
h 8
24 kg
0
230 216 - 23.800
1-200
bars-3m
drawn
h-8-en
1.700
55903101700
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
cold drawn, hard,
tensile strength >1850 Mpa
in 3 m bars
diam. 1.70 mm, tolerance ISO h7
bars 3m
drawn
h 7
1 kg
0
290 212 - 1.053
1-700
bars-3m
drawn
h-7-en
4.500
55913004500
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
tensile stength Rm: >1600 MPa
cold drawn, ground, hard, in 3m bars
diam. 4.50 mm, tolerance ISO h6
bars 3m
ground
h 6
31 kg
0
061 014 - 23.609|070 823 - 7.300
4-500
bars-3m
ground
h-6-en
0.450
55901100450
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
cold drawn, hard, Rm ~1800 MPa
in 1m bars
diam. 0.45 mm, tolerance ISO h7
special length
drawn
h 7
0 kg
0
270 407 - 0.159
0-450
special-length
drawn
h-7-en
0.500
55900000500
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ASTM 1058, ISO 5832-7, UNS R30003
AMS 5833 – 5834
cold drawn, hard, Rm >2000 MPa
on spools
diam. 0.50 mm, tolerance ISO h6
in spools
drawn
h 6
0 kg
0
050 607 - 0.255
0-500
in-spools
drawn
h-6-en
0.500
55902000500
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
cold drawn, hard, tensile >1750 Mpa
in 2m bars
diam. 0.50 mm, tolerance ISO h6
bars 2m
drawn
h 6
1 kg
0
050 607 - 0.949
0-500
bars-2m
drawn
h-6-en
4.000
55913004000
PHYNOX
high quality spring steel for Implants
Co-Cr-Ni-Mo alloy,
mat.no 2.4711, ASTM 1058, ISO 5832-7
UNS R30003, AFNOR NF S90 – 403
AMS 5833 – 5834
cold drawn, ground, hard,
tensile stength Rm: >1500 MPa
in 2.80-3m bars
diam. 4.00 mm, tolerance ISO h6
bars 3m
ground
h 6
80 kg
0
121 119 - 80.339
4-000
bars-3m
ground
h-6-en
0.800
55900000800
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
cold drawn, hard, Rm >2000 MPa
in spools
diam. 0.80 mm, tolerance ISO h6
in spools
drawn
h 6
28 kg
0
160 919 - 27.550
0-800
in-spools
drawn
h-6-en
5.500
55913005500
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
tensile stength Rm: >1500 MPa
hard drawn, ground, in 3m bars
diam. 5.50 mm, tolerance ISO h6
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
drawn, nickel surface, hard
tensile strength Rm: > 2000 MPa
in spools
diam. 0.20 mm, tolerance h6
in spools
drawn
h 6
4 kg
0
101 207 - 4.126
0-200
in-spools
drawn
h-6-en
0.250
55900000250
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
drawn, nickel surface, on spools
tensile strength Rm >2300 MPa
diam. 0.25 mm, tolerance ISO h6
in spools
drawn
h 6
5 kg
0
101 207 - 4.791
0-250
in-spools
drawn
h-6-en
10.000
55913010000
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy, no. 2.4711
ISO 5832-7, ASTM 1058, (chem only)
AFNOR NF S90-403
UNS 12th Edition R30003, (chem only)
AMS 5833 (chem only)
tensile strength Rm >1400 MPa
cold drawn, hard, ground, in 3m bars
pointed/chamfered
diam. 10.00 mm, tolerance ISO h6
bars 3m
ground
h 6
239 kg
0
080 221 - 239.133
10-000
bars-3m
ground
h-6-en
1.800
55903201800
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
cold drawn, hard, in 3m bars
tensile strength Rm: ~1200 MPa
diam. 1.80 mm, tolerance ISO h8
bars 3m
drawn
h 8
30 kg
0
230 507 - 29.727
1-800
bars-3m
drawn
h-8-en
9.000
55913009000
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy
no. 2.4711, ASTM 1058 (Chem. only)
ISO 5832-7, UNS R30003
AFNOR NF S90 – 403
tensile stength Rm >1500 MPa
cold drawn, hard, ground, in 3m bars
pointed/chamfered
diam. 9.00 mm, tolerance ISO h6
bars 3m
ground
h 6
228 kg
0
190 619 - 1.300|080 221 - 267.100
9-000
bars-3m
ground
h-6-en
8.000
55913008000
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7, ASTM 1058 (Chem. only)
cold drawn, hard, ground, in 3m bars
tensile stength Rm: >1500 MPa
pointed/chamfered
diam. 8.00 mm, tolerance ISO h6
bars 3m
ground
h 6
154 kg
0
280 223 - 154.398
8-000
bars-3m
ground
h-6-en
0.400
55900000400
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7, ASTM 1058
UNS R30003, AMS 5833 – 5834
cold drawn, hard, Rm >2100 MPa
on spools
diam. 0.40 mm, tolerance ISO h6
in spools
drawn
h 6
7 kg
0
300 516 - 7.000
0-400
in-spools
drawn
h-6-en
0.250
559000002501
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
UNS R30003, AMS 5833 – 5834
cold drawn, hard, Rm >2200 Mpa
on spools
diam. 0.25 mm, tolerance ISO h6
in spools
drawn
h 6
1 kg
0
270 407 - 1.101
0-250
in-spools
drawn
h-6-en
0.300
55900000300
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
UNS R30003, AMS 5833 – 5834
cold drawn, hard, Rm >2100 M8a
on spools
diam. 0.30 mm, tolerance ISO h6
in spools
drawn
h 6
0 kg
0
291 110 - 0.470
0-300
in-spools
drawn
h-6-en
0.350
55900000350
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058,
UNS R30003, AMS 5833 – 5834
cold drawn, extra hard, Rm >1950 MPa
on spools
diam. 0.35 mm, tolerance ISO h6
in spools
drawn
h 6
2 kg
0
140 415 - 1.711
0-350
in-spools
drawn
h-6-en
8.500
55913008500
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
cold drawn, hard, in 3m bars
tensile stength Rm: >1400 MPa
diam. 8.50 mm, tolerance ISO h6
bars 3m
ground
h 6
38 kg
0
190 619 - 38.300
8-500
bars-3m
ground
h-6-en
0.600
55900000600
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
cold drawn, hard, Rm >1800 MPa
on spools
diam. 0.60 mm, tolerance h6
in spools
drawn
h 6
2 kg
0
050 607 - 1.890
0-600
in-spools
drawn
h-6-en
1.400
559001014001
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
cold drawn, hard, on spools
tensile strength Rm >1900 Mpa
diam. 1.40 mm, tolerance ISO h7
in spools
drawn
h 7
13 kg
0
160 118 - 13.450
1-400
in-spools
drawn
h-7-en
3.200
55913003200
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
cold drawn, ground, hard, in 3m bars
tensile strength: Rm >1500 MPa
diam. 3.20 mm, tolerance ISO h6
bars 3m
ground
h 6
0 kg
0
0
3-200
bars-3m
ground
h-6-en
5.600
55903205600
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy, mat.no. 2.4711
ISO 5832-7 (chem. only)
tensile stength Rm: 1600-1800 MPa
hard drawn, in 3m bars (+50/0mm)
diam. 5.60 mm, tolerance ISO h8
bars 3m
drawn
h 8
291 kg
0
040 521 - 291.000
5-600
bars-3m
drawn
h-8-en
2.350
55913002350
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy mat.no 2.4711
ISO 5832-7 , ASTM 1058
cold drawn, ground, hard, in 3m bars
Rm 1600 – 1850 MPa
diam. 2.35 mm, tolerance ISO h6
bars 3m
ground
h 6
19 kg
0
250 209 - 19.216
2-350
bars-3m
ground
h-6-en
1.600
55913801600
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
cold drawn, ground, hard,
tensile stength Rm: 1600 – 1850 MPa
length of bars: 3m +/-15mm
diam. 1.60 mm, tolerance 0/-0.005 mm
bars 3m
ground
spec.
0 kg
0
0
1-600
bars-3m
ground
spec-en
0.450
55900100450
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
cold drawn, hard, on spool
Rm >2000 Mpa
diam. 0.45 mm, tolerance ISO h7
in spools
drawn
h 7
1 kg
0
270 407 - 0.749
0-450
in-spools
drawn
h-7-en
3.500
55913003500
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
cold drawn, ground, hard,
tensile stength Rm: >1500 MPa
in 2.80-3m bars
diam. 3.50 mm, tolerance ISO h6
bars 3m
ground
h 6
7 kg
0
121 119 - 7.050
3-500
bars-3m
ground
h-6-en
15.000
55913015000
PHYNOX
Co-Cr-Ni-Mo alloy spring steel
Mat.No. 2.4711, ISO 5832-7
ASTM F1058, AMS 5833 – 5834, UNS R3003
cold worked, hard, Rm > 1400 MPa
ground, in 3m bars
diam. 15.00 mm, tolerance ISO h6
bars 3m
ground
h 6
381 kg
0
190 619 - 381.120
15-000
bars-3m
ground
h-6-en
0.900
55900000900
PHYNOX
high quality spring steel
no. mat. 2.4711, AMS 5833 – 5834
ASTM 1058, ISO 5832-7, UNS R30003
cold drawn, hard, Rm >1800 MPa
on spools
diam. 0.90 mm, tolerance ISO h6
in spools
drawn
h 6
5 kg
0
050 607 - 5.159
0-900
in-spools
drawn
h-6-en
12.000
55913012000
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
cold drawn, hard, ground, in 3m bars
pointed/chamfered
diam. 12.00 mm, tolerance ISO h6
bars 3m
ground
h 6
287 kg
0
070 819 - 287.000
12-000
bars-3m
ground
h-6-en
2.000
55913002000
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7, ASTM 1058
cold drawn, ground,
tensile strength Rm: >1500 MPa
in 3m bars (+30/0 mm)
diam. 2.00 mm, tolerance ISO h6
bars 3m
ground
h 6
0 kg
0
0
2-000
bars-3m
ground
h-6-en
0.700
55900000700
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
cold drawn, hard, Rm >1800 Mpa
on spools
diam. 0.70 mm, tolerance ISO h6
in spools
drawn
h 6
5 kg
0
050 607 - 4.610
0-700
in-spools
drawn
h-6-en
2.000
55901802000
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
cold drawn, hard, in 4 m bars
tensile strength Rm >1700 MPa
diam. 2.00 mm, 0/-0.005mm
special length
drawn
spec.
0 kg
0
220 507 - 0.230
2-000
special-length
drawn
spec-en
5.000
55913005000
PHYNOX
Co-Cr-Ni-Mo alloy German no. 2.4711
ISO 5832-7, UNS R30003
high quality spring steel
cold drawn, hard, ground,
tensile strength Rm: >1500 MPa
in 3m bars (+50/0mm)
end of bars: pointed/chamfered
diam. 5.00 mm, tolerance ISO h6
bars 3m
ground
h 6
60 kg
0
040 521 - 59.820
5-000
bars-3m
ground
h-6-en
6.000
55913006000
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
tensile strength Rm >1500 MPa
hard drawn, ground, in 3m bars
pointed/chamfered
diam. 6.00 mm, tolerance ISO h6
bars 3m
ground
h 6
90 kg
0
160 217 - 90.336
6-000
bars-3m
ground
h-6-en
0.300
55902000300
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
UNS R30003, AFNOR NF S90 – 403
AMS 5833 – 5834
precicely cold drawn, hard,
tensile strength Rm ~2000 MPa
in straight lengths of 2 meters
diam. 0.30 mm, tolerance ISO h6
bars 2m
drawn
h 6
1 kg
0
270 407 - 0.752
0-300
bars-2m
drawn
h-6-en
2.200
55900202200
PHYNOX
high quality spring steel
german no 2.4711,ISO 5832-7
cold drawn, hard, in coils
tensile strength: Rm >1900 MPa
diam. 2.20 mm, tolerance ISO h8
in spools
drawn
h 8
10 kg
0
220 507 - 10.400
2-200
in-spools
drawn
h-8-en
0.800
55902000800
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
cold drawn, hard, Rm >1800 MPa
in 2m bars
diam. 0.80 mm, tolerance ISO h6
bars 2m
drawn
h 6
7 kg
0
050 607 - 6.571
0-800
bars-2m
drawn
h-6-en
1.100
55903101100
PHYNOX
high quality spring steel
no. mat. 2.4711, AMS 5833 – 5834
ASTM 1058, ISO 5832-7
UNS R30003, AFNOR NF S90 – 403
cold drawn, hard, in 3m bars
tensile strength Rm: 1700-1850 MPa
diam. 1.10 mm, tolerance ISO h7
bars 3m
drawn
h 7
3 kg
0
221 008 - 0.503|230 216 - 2.450
1-100
bars-3m
drawn
h-7-en
1.100
55900701100
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
cold drawn, hard, on spools
tensile strength Rm >1900 MPa
diam. 1.10 mm, tolerance ISO fg7
in spools
drawn
fg 7
8 kg
0
230 216 - 7.940
1-100
in-spools
drawn
fg-7-en
0.800
55900800800
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
cold drawn, hard, annealed
,
tensile strength Rm > 1050 MPa
on spools
diam. 0.80 mm, tolerance +/-0.01 mm
in spools
drawn
spec.
39 kg
0
171 013 - 38.740
0-800
in-spools
drawn
spec-en
0.600
559008006002
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy
German no. 2.4711,ISO 5832-7,
cold drawn, hard, annealed
tensile strength Rm >1050 MPa
on spool
diam. 0.60 mm, tolerance +/-0.01
in spools
drawn
spec.
64 kg
0
140 415 - 63.950
0-600
in-spools
drawn
spec-en
1.600
55900201600
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy, mat. no 2.4711
ISO 5832-7, UNS R300033,
AMS 5833D, ASTM F1058 Grade 1
Rm 1450 – 1650 MPa
cold drawn, in coils of 30 +/-5kg
diam. 1.60 mm, tolerance ISO h8
in spools
drawn
h 8
0 kg
0
0
1-600
in-spools
drawn
h-8-en
0.800
55901000800
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
annealed, cold drawn, Rm ~1400 Mpa
in 1m bars
diam. 0.80 mm, tolerance ISO h6
special length
drawn
h 6
0 kg
0
0
0-800
special-length
drawn
h-6-en
12.000
55911012000
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
cold drawn, hard, ground, in 1.5m bars
tensile strength Rm >1400 MPa
diam. 12.00 mm, tolerance ISO h6
special length
ground
h 6
52 kg
0
100 311 - 52.318
12-000
special-length
ground
h-6-en
0.800
559020008001
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
annealed, cold drawn, Rm ~1500 Mpa
in 2m bars
diam. 0.80 mm, tolerance ISO h6
bars 2m
drawn
h 6
3 kg
0
050 607 - 0.149|160 919 - 3.000
0-800
bars-2m
drawn
h-6-en
0.800
55902800800
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
annealed, cold drawn, Rm ~1400 Mpa
in 2m bars
diam. 0.80 mm, tolerance ISO js6
bars 2m
drawn
spec.
1 kg
0
050 607 - 1.202
0-800
bars-2m
drawn
spec-en
6.350
55913006350
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
tensile stength: >1500 MPa
cold drawn, ground, hard, in 3m bars
diam. 6.35 mm, tolerance ISO h6
bars 3m
ground
h 6
41 kg
0
230 507 - 41.200
6-350
bars-3m
ground
h-6-en
2.100
55900202100
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
cold drawn, hard, in coils
tensile strength Rm >1700 MPa
diam. 2.10 mm, tolerance ISO h8
in spools
drawn
h 8
475 kg
0
060 923 - 474.700
2-100
in-spools
drawn
h-8-en
1.700
559002017001
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
cold drawn, hard,
Rm 1600 – 1600 MPa
in coils
diam. 1.70 mm, tolerance ISO h8
in spools
drawn
h 8
7 kg
0
231 211 - 6.550
1-700
in-spools
drawn
h-8-en
3.020
559038030201
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
drawn, annealed, Rm 900 – 1105 Mpa
in 3m bars
diam. 3.02 mm, tolerance +/-0.01
bars 3m
drawn
spec.
22 kg
0
210 111 - 21.900
3-020
bars-3m
drawn
spec-en
0.850
55900000850
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
cold drawn, hard, Rm >2000 MPa
in spools
diam. 0.85 mm, tolerance ISO h6
in spools
drawn
h 6
4 kg
0
050 607 - 4.157
0-850
in-spools
drawn
h-6-en
3.000
55900303000
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy, W.Nr. 2.4711
ASTM F1058, ISO 5832-7,
AMS 5833-D, AMS 5834-D, UNS R30003,
cold drawn wire, hard, Rm 1500 – 1700 MPa
in coils of 25 – 35 kg
diam. 3.00 mm, tolerance ISO h9
in spools
drawn
h 9
248 kg
0
100 424 - 247.800
3-000
in-spools
drawn
h-9-en
0.650
55900000650
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
cold drawn, hard, Rm >1800 MPa
on spools
diam. 0.65 mm, tolerance ISO h6
in spools
drawn
h 6
1 kg
0
050 607 - 0.977
0-650
in-spools
drawn
h-6-en
7.000
55913007000
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7, ASTM 1058
tensile stength Rm: >1600 MPa
cold drawn, hard, ground, in 3m bars
pointed, chamfered
diam. 7.00 mm, tolerance ISO h6
bars 3m
ground
h 6
119 kg
0
210 416 - 119.342
7-000
bars-3m
ground
h-6-en
0.700
55902000700
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
cold drawn, hard, Rm >1800 MPa
in 2m bars
diam. 0.70 mm, tolerance ISO h6
bars 2m
drawn
h 6
2 kg
0
050 607 - 1.815
0-700
bars-2m
drawn
h-6-en
0.900
55902000900
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
cold drawn, hard, Rm >1800 MPa
in 2m bars
diam. 0.90 mm, tolerance ISO h6
bars 2m
drawn
h 6
2 kg
0
050 607 - 1.856
0-900
bars-2m
drawn
h-6-en
0.550
55900000550
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ASTM 1058, ISO 5832-7, UNS R30003
AMS 5833 – 5834
cold drawn, hard, Rm >1800 MPa
on spools
diam. 0.55 mm, tolerance ISO h6
in spools
drawn
h 6
0 kg
0
0
0-550
in-spools
drawn
h-6-en
3.000
55913903000
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7, ASTM 1058
cold drawn, hard, ground, in 3m bars
tensile strength Rm >1500 MPa
pointed/chamfered
diam. 3.00 mm, tolerance ISO h5
bars 3m
ground
h 5
154 kg
0
050 624 - 154.200
3-000
bars-3m
ground
h-5-en
1.000
55903001000
PHYNOX
high quality spring steel
n° mat. 2.4711,ASTM 1058, ISO 5832-7
UNS R30003, AFNOR NF S90 – 403
AMS 5833 – 5834
cold drawn, hard, Rm >1600 MPa
in 3m bars
diam. 1.00 mm, tolerance ISO h6
bars 3m
drawn
h 6
16 kg
0
101 213 - 15.510
1-000
bars-3m
drawn
h-6-en
1.200
559002012001
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ASTM 1058, ISO 5832-7
AFNOR NF S90 – 403, AMS 5833
annealed, drawn, on spools
Rm 1100 – 1250 MPa
diam. 1.20 mm, tolerance ISO h8
in spools
drawn
h 8
109 kg
0
300 516 - 2.440|100 223 - 106.540
1-200
in-spools
drawn
h-8-en
1.000
55900001000
PHYNOX
high quality spring steel
no. mat. 2.4711, AMS 5833 – 5834
ASTM 1058, ISO 5832-7, UNS R30003
cold drawn, hard, on spools
tensile strength Rm: >2000 MPa
diam. 1.00 mm, tolerance ISO h6
in spools
drawn
h 6
6 kg
0
221 008 - 5.850
1-000
in-spools
drawn
h-6-en
1.350
55900101350
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
cold drawn, hard, on spools
tensile strength Rm >1900 MPa
diam. 1.35 mm, tolerance ISO h7
in spools
drawn
h 7
16 kg
0
160 118 - 16.340
1-350
in-spools
drawn
h-7-en
1.300
55900201300
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ASTM 1058, ISO 5832-7
UNS R30003, AMS 5833D
annealed, drawn, on spools
Rm 1000 – 1250 MPa
diam. 1.30 mm, tolerance ISO h8
in spools
drawn
h 8
65 kg
0
310 516 - 64.750
1-300
in-spools
drawn
h-8-en
0.600
559000006001
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711, AMS 5833 D
ISO 5832-7, ASTM 1058, UNS R30003
cold drawn, hard, Rm >2100 MPa
on spools
diam. 0.60 mm, tolerance h6
in spools
drawn
h 6
6 kg
0
300 516 - 6.267
0-600
in-spools
drawn
h-6-en
2.000
55903902000
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy,
no. 2.4711
cold drawn, hard, Rm >1800 MPa
in 3m bars
diam. 2.00 mm, tolerance ISO h5
bars 3m
drawn
h 5
82 kg
0
281 122 - 8.360|100 424 - 73.600
2-000
bars-3m
drawn
h-5-en
1.000
55903901000
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
cold drawn, hard,
tensile strength Rm: >1900 MPa
in 3m bars
diam. 1.00 mm, tolerance ISO h5
bars 3m
drawn
h 5
6 kg
0
310 511 - 5.953
1-000
bars-3m
drawn
h-5-en
2.500
55913002500
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7, ASTM F-1058, UNS R30003,
AFNOR NF S90 – 403
AMS 5833, Rm >1500 MPa
cold drawn, hard, ground, in 3m bars (+20/-10mm)
diam. 2.50 mm, tolerance ISO h6
bars 3m
ground
h 6
0 kg
0
260 224 - 22.039
2-500
bars-3m
ground
h-6-en
1.900
55903901900
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
cold drawn, hard, in 3m bars
Rm >1700 MPa
diam. 1.90 mm, tolerance ISO h5
bars 3m
drawn
h 5
4 kg
0
290 212 - 3.700
1-900
bars-3m
drawn
h-5-en
1.800
55903901800
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
cold drawn, hard, Rm >1700 MPa
in 3m bars
diam. 1.80 mm, tolerance ISO h5
bars 3m
drawn
h 5
3 kg
0
290 212 - 2.950
1-800
bars-3m
drawn
h-5-en
8.200
55903308200
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
tensile strength Rm > 1400 MPa
cold drawn, hard, in 3m bars (+30/0mm)
diam. 8.20 mm, tolerance ISO h9
bars 3m
drawn
h 9
232 kg
0
280 223 - 232.000
8-200
bars-3m
drawn
h-9-en
3.100
55900303100
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ASTM 1058, ISO 5832-7, AMS 5833
UNS R30003, AFNOR NF S90 – 403
cold drawn, hard, Rm 1680 – 1900 Mpa
in coils of 25 – 35 kg
diam. 3.10 mm, tolerance ISO h9
in spools
drawn
h 9
0 kg
0
0
3-100
in-spools
drawn
h-9-en
1.350
559001013501
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7, ASTM 1058
cold drawn, on spools
tensile strength Rm >1300 MPa
diam. 1.35 mm, tolerance ISO h7
in spools
drawn
h 7
1 kg
0
160 718 - 0.700
1-350
in-spools
drawn
h-7-en
1.300
55900001300
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
cold drawn, on spool SH 460
Rm 1350 – 1550 MPa
diam. 1.30 mm, tolerance ISO h6
in spools
drawn
h 6
3 kg
0
161 224 - 2.550
1-300
in-spools
drawn
h-6-en
1.500
55903101500
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy, mat. no 2.4711
ISO 5832-7, UNS R30003,
ASTM 1058 Grade 1
cold drawn, tensile Rm >1500 MPa
in 3m bars
diam. 1.50 mm, tolerance ISO h7
bars 3m
drawn
h 7
0 kg
0
0
1-500
bars-3m
drawn
h-7-en
3.100
55903203100
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 (chem.only) , ASTM 1058 Grade 1
tensile strength Rm:1500 – 1800 MPa
cold drawn, hard, in 3m bars (+50/0mm)
diam. 3.10 mm, tolerance ISO h8
bars 3m
drawn
h 8
0 kg
0
0
3-100
bars-3m
drawn
h-8-en
5.600
55903305600
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy, mat.no. 2.4711
ISO 5832-7 (chem. only)
tensile stength Rm: 1600-1800 MPa
hard drawn, in 3m bars (+50/0mm)
diam. 5.60 mm, tolerance ISO h9
bars 3m
drawn
h 9
0 kg
0
0
5-600
bars-3m
drawn
h-9-en
3.000
559003030001
PHYNOX
Co-Cr-Ni-Mo Spring quality
W.Nr. 2.4711, AMS 5833 – 5834
ASTM F1058, ISO 5832-7, UNS R30003
cold drawn, annealed
tensiles strength: Rm 1000 – 1200 MPa
in coils of 25 – 35 kg
diam. 3.00 mm, tolerance ISO h9
in spools
drawn
h 9
0 kg
0
0
3-000
in-spools
drawn
h-9-en
2.700
55900302700
PHYNOX
Co-Cr-Ni-Mo Spring quality
W.Nr. 2.4711, AMS 5833 – 5834
ASTM F1058, ISO 5832-7, UNS R30003
cold drawn, annealed
tensiles strength: Rm 1000 – 1200 MPa
in coils of 20-30kg,
diam. 2.70 mm, tolerance ISO h9
in spools
drawn
h 9
147 kg
0
070 222 - 53.000|010 322 - 94.200
2-700
in-spools
drawn
h-9-en
3.200
55900303200
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy, W.Nr. 2.4711
ASTM F1058, (chem. only)
ISO 5832-7 (chem. only), UNS R30003,
cold drawn wire, hard, Rm 1700 – 1900 MPa
in coils of 25 – 35 kg
diam. 3.20 mm, tolerance ISO h9
in spools
drawn
h 9
89 kg
0
050 624 - 88.600
3-200
in-spools
drawn
h-9-en
1.230
55900801230
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ASTM 1058, ISO 5832-7
UNS R30003, AMS 5833D
annealed, drawn, on spool DIN 250
Rm 960 – 970 MPa
diam. 1.23 mm, tolerance ISO r6 (+0.010/+0.016)
in spools
drawn
spec.
14 kg
0
310 516 - 13.600
1-230
in-spools
drawn
spec-en
4.600
55903304600
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058
tensile stength Rm:> 1600 MPa
drawn, hard, in 3m bars
diam. 4.60 mm, tolerance ISO h9
bars 3m
drawn
h 9
0 kg
500
0
4-600
bars-3m
drawn
h-9-en
6.200
55903306200
PHYNOX
Co-Cr-Ni-Mo high quality spring steel
W.Nr. 2.4711
ISO 5832-7, ASTM 1058, (chem only)
UNS R30003, (chem only)
AMS 5833 (chem only)
hard drawn
tensile strength Rm >1500 MPa
in 3m bars
diam. 6.20 mm, tolerance ISO h9
bars 3m
drawn
h 9
496 kg
0
280 223 - 348.000|290 524 - 148.000
6-200
bars-3m
drawn
h-9-en
7.600
55903307600
PHYNOX
Co-Cr-Ni-Mo high quality spring steel
W.Nr. 2.4711
ISO 5832-7, ASTM 1058, (chem only)
UNS R30003, (chem only)
AMS 5833 (chem only)
hard drawn
tensile strength Rm >1500 MPa
in 3m bars
diam. 7.60 mm, tolerance ISO h9
bars 3m
drawn
h 9
169 kg
0
280 223 - 168.900
7-600
bars-3m
drawn
h-9-en
1.320
55900001320
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy, mat. no 2.4711
ISO 5832-7, UNS R300033,
AMS 5833D, ASTM F1058 Grade 1
Rm 1300 – 1500 MPa
cold drawn, in coils of 15 – 20 kg
diam. 1.32 mm, tolerance ISO h6
in spools
drawn
h 6
0 kg
0
0
1-320
in-spools
drawn
h-6-en
3.900
55900303900
PHYNOX
Co-Cr-Ni-Mo Spring quality
no. 2.4711, AMS 5833 – 5834
ASTM F1058, ISO 5832-7, UNS R30003
cold drawn, annealed
tensiles strength: Rm 1000 – 1200 MPa
in coils of 25 – 35 kg
diam. 3.90 mm, tolerance ISO h9
in spools
drawn
h 9
320 kg
0
100 424 - 319.600
3-900
in-spools
drawn
h-9-en
1.320
55903101320
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy, mat. no 2.4711
ISO 5832-7, UNS R300033,
AMS 5833D, ASTM F1058 Grade 1
tensile strength Rm 1750 – 1900 MPa
cold drawn, in 3m bars (+/-10mm)
diam. 1.32 mm, tolerance ISO h7
bars 3m
drawn
h 7
41 kg
0
100 424 - 40.600
1-320
bars-3m
drawn
h-7-en
1.320
559000013201
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy, mat. no 2.4711
ISO 5832-7, UNS R300033,
AMS 5833D, ASTM F1058 Grade 1
Rm >1450 MPa
cold drawn, in coils of 15 – 20 kg
diam. 1.32 mm, tolerance ISO h6
in spools
drawn
h 6
0 kg
0
0
1-320
in-spools
drawn
h-6-en
1.600
559002016001
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ASTM 1058, ISO 5832-7
AFNOR NF S90 – 403, AMS 5833
annealed, drawn, on spools
Rm 1000- 1200 MPa
diam. 1.60 mm, tolerance ISO h8
in spools
drawn
h 8
339 kg
0
161 224 - 338.900
1-600
in-spools
drawn
h-8-en
4.200
55900304200
PHYNOX
Co-Cr-Ni-Mo Spring quality
no. 2.4711, AMS 5833 – 5834
ASTM F1058, ISO 5832-7, UNS R30003
cold drawn, annealed
tensiles strength: Rm 1000 – 1200 MPa
in coils of 25 – 35 kg
diam. 4.20 mm, tolerance ISO h9
in spools
drawn
h 9
0 kg
0
0
4-200
in-spools
drawn
h-9-en
1.800
55900201800
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7 , ASTM 1058 (chem only)
cold drawn, Rm 1000-1250 Mpa
on spool 20 – 30 kg
diam. 1.80 mm, tolerance ISO h8
in spools
drawn
h 8
220 kg
0
260 824 - 220.000
1-800
in-spools
drawn
h-8-en
4.500
55900304500
PHYNOX
Co-Cr-Ni-Mo Spring quality
no. 2.4711, AMS 5833 – 5834
ASTM F1058, ISO 5832-7, UNS R30003
cold drawn, annealed
tensiles strength: Rm 1000 – 1200 MPa
in coils of 25 – 35 kg
diam. 4.50 mm, tolerance ISO h9
in spools
drawn
h 9
536 kg
1200
191 124 - 536.000
4-500
in-spools
drawn
h-9-en
7.000
55913107000
PHYNOX
high quality spring steel
Co-Cr-Ni-Mo alloy W.Nr. 2.4711
ISO 5832-7, ASTM 1058
tensile stength Rm: >1600 MPa
cold drawn, hard, ground, in 3m bars
pointed, chamfered
diam. 7.00 mm, tolerance ISO h7
bars 3m
ground
h 7
134 kg
0
280 223 - 134.200
7-000
bars-3m
ground
h-7-en
1.000
55900201000
Brief description
Klein designation:
PHYNOX KL
Class of steels:
Cobalt-Chromium-Nickel-Iron Alloy
Material number:
2.4711
Standard UNS:
RoHS 2 – 2011/65/EU:
Machinability:
Moderate to difficult, depending on the degree of cold work
Hardening capability:
Depending on the degree of cold work, tensile strength up to 2500 MPa
Forming:
Ductile, easily formable
Cold working hardening:
Strength increases with cold working
Polishing ability:
Very good
Magnetism:
Non-magnetic
Corrosion resistance:
Very good
Uses:
Implantable springs, strictly non-magnetic areas, Petrochemicals, highest demands on corrosion resistance, Elevator springs (similar to Nivaflex). Aerospace industry, etc.
Moderate to difficult, depending on the degree of cold work
Hardening capability:
Depending on the degree of cold work, tensile strength up to 2500 MPa
Forming:
Ductile, easily formable
Cold working hardening:
Strength increases with cold working
Polishing ability:
Very good
Magnetism:
Non-magnetic
Corrosion resistance:
Very good
Uses:
Implantable springs, strictly non-magnetic areas, Petrochemicals, highest demands on corrosion resistance, Elevator springs (similar to Nivaflex). Aerospace industry, etc.
Moderate to difficult, depending on the degree of cold work
Hardening capability:
Depending on the degree of cold work, tensile strength up to 2500 MPa
Forming:
Ductile, easily formable
Cold working hardening:
Strength increases with cold working
Polishing ability:
Very good
Magnetism:
Non-magnetic
Corrosion resistance:
Very good
Uses:
Implantable springs, strictly non-magnetic areas, Petrochemicals, highest demands on corrosion resistance, Elevator springs (similar to Nivaflex). Aerospace industry, etc.
Moderate to difficult, depending on the degree of cold work
Hardening capability:
Depending on the degree of cold work, tensile strength up to 2500 MPa
Forming:
Ductile, easily formable
Cold working hardening:
Strength increases with cold working
Polishing ability:
Very good
Magnetism:
Non-magnetic
Corrosion resistance:
Very good
Uses:
Implantable springs, strictly non-magnetic areas, Petrochemicals, highest demands on corrosion resistance, Elevator springs (similar to Nivaflex). Aerospace industry, etc.
