Generally suitable for RoHS-compliant applications, as the material is lead-free; formal confirmation of compliance should be provided for each specific batch.
Machinability:
Very consistent machinability and long tool life
Hardenability:
Very good; wide temperature and time range during hardening, high hardness and a low risk of rejects. A hardness of approximately 850 HV5 is achieved after quenching.
Formability:
Good; particularly suitable for long, slender precision components with tight tolerances
Cold forming:
Very good; in particular, excellent cold-heading properties
Polishability:
Good; the material is available in ground and polished condition.
Magnetism:
Magnetic or ferromagnetic
Corrosion resistance:
Poor; not corrosion-resistant
Applications:
Finemac™ is primarily used for high-precision machined small components in precision engineering. Its main field of application is the watchmaking industry, particularly rotationally symmetrical components for mechanical watch movements.
Sandvik Finemac
freecutting high carbon steel, leadfree
cold drawn, stress relieved
in 2m bars (+30/0 mm)
diam. 3.00 mm, tolerance ISO h7
bars 2m
drawn
h 7
0 kg
0
3-000
bars-2m
drawn
h-7-en
2.500
10612902500
Sandvik Finemac
freecutting high carbon steel, leadfree
cold drawn, stress relieved, ground
in 2m bars (+30/0 mm)
pointed / chamfered
diam. 2.50 mm, tolerance ISO h5
bars 2m
ground
h 5
119 kg
0
310 117 - 6.800|270 418 - 111.800
2-500
bars-2m
ground
h-5-en
6.500
10613106500
Sandvik Finemac
freecutting high carbon steel, leadfree
cold drawn, ground,
in 3m bars (+30/0 mm)
end of bars: pointed, chamfered
diam. 6.50 mm, tolerance ISO h7
bars 3m
ground
h 7
120 kg
0
050 517 - 2.400|080 318 - 117.300
6-500
bars-3m
ground
h-7-en
2.500
106139025002
Sandvik Finemac
freecutting high carbon steel, leadfree
cold drawn, ground, polished
in 3m bars (+30/0 mm)
end of bars: pointed, chamfered
diam. 2.50 mm, tolerance ISO h5
bars 3m
ground
h 5
233 kg
300
290 618 - 217.800|040 419 - 15.403
2-500
bars-3m
ground
h-5-en
3.000
106139030001
Finemac
freecutting high carbon steel, leadfree
cold drawn, ground, polished
in 3m bars (+30/0 mm)
end of bars: pointed, chamfered
diam. 3.00 mm, tolerance ISO h5
Sandvik Finemac
freecutting high carbon steel, leadfree
special steel for watch industry
cold drawn, ground, polished
stress relieved
in 3m bars (+30/0 mm)
end of bars: pointed, chamfered
100% eddycurrent inspected cl. 4
diam. 4.00 mm, tolerance ISO 286-2/h5
bars 3m
ground
h 5
1218 kg
800
120 226 - 860.033|041 125 - 361.583
4-000
bars-3m
ground
h-5-en
5.000
106139050001
Sandvik Finemac
freecutting high carbon steel, leadfree
cold drawn, ground, polished, stress relieved
in 3m bars (+40/0 mm)
end of bars: pointed, chamfered
diam. 5.00 mm, tolerance ISO h5
Sandvik Finemac
freecutting high carbon steel, leadfree
Highend watch steel for movements
cold drawn, ground, polished
in 3m bars (+30/0 mm)
end of bars: pointed, chamfered
diam. 6.00 mm, tolerance ISO h5
Sandvik Finemac
freecutting high carbon steel, leadfree
cold drawn, ground, polished
stress relieved
in 3m bars (+30/0 mm)
end of bars: pointed, chamfered
diam. 8.00 mm, tolerance ISO h5
Sandvik Finemac
freecutting high carbon steel, leadfree
cold drawn, ground, polished
in 2m bars (+30/0 mm)
end of bars: pointed, chamfered
diam. 4.00 mm, tolerance ISO h5
bars 2m
ground
h 5
0 kg
0
4-000
bars-2m
ground
h-5-en
6.500
106139065001
Sandvik Finemac
freecutting high carbon steel, leadfree
cold drawn, ground, polished
in 3m bars (+30/0 mm)
end of bars: pointed, chamfered
diam. 6.50 mm, tolerance ISO h5
bars 3m
ground
h 5
69 kg
300
121 217 - 68.800
6-500
bars-3m
ground
h-5-en
5.500
106139055001
Sandvik Finemac
freecutting high carbon steel, leadfree
cold drawn, ground, polished, stress relieved
in 3m bars (+30/0 mm)
end of bars: pointed, chamfered
eddycurrent crack tested cl. 4
diam. 5.50 mm, tolerance ISO 286-2/h5
bars 3m
ground
h 5
601 kg
0
031 221 - 0.700|090 626 - 600.000
5-500
bars-3m
ground
h-5-en
2.000
106129020001
Sandvik Finemac
freecutting high carbon steel
cold drawn, ground, polished
in 2m bars (+30/0 mm)
end of bars: pointed, chamfered
diam. 2.00 mm, tolerance ISO h5
bars 2m
ground
h 5
448 kg
0
230 326 - 447.573
2-000
bars-2m
ground
h-5-en
7.000
106139070001
Sandvik Finemac
freecutting high carbon steel, leadfree
cold drawn, ground, polished, stress relieved
in 3m bars (+30/0 mm)
end of bars: pointed, chamfered
eddycurrent crack tested per DIN ISO 683-7, cl.4
diam. 7.00 mm, tolerance ISO h5
bars 3m
ground
h 5
0 kg
500
300 426 - 0.800
7-000
bars-3m
ground
h-5-en
9.000
106139090001
Sandvik Finemac
freecutting high carbon steel, leadfree
cold drawn, ground, polished
in 3m bars (+30/0 mm)
end of bars: pointed, chamfered
diam. 9.00 mm, tolerance ISO h5
bars 3m
ground
h 5
0 kg
0
9-000
bars-3m
ground
h-5-en
6.000
10613106000
Sandvik Finemac
freecutting high carbon steel, leadfree
cold drawn, ground, polished
in 3m bars (+30/0 mm)
end of bars: pointed, chamfered
diam. 6.00 mm, tolerance ISO h7
bars 3m
ground
h 7
0 kg
0
6-000
bars-3m
ground
h-7-en
6.000
106130060001
Sandvik Finemac
freecutting high carbon steel, leadfree
cold drawn, ground, polished
in 3m bars (+30/0 mm)
end of bars: pointed, chamfered
diam. 6.00 mm, tolerance ISO h6
bars 3m
ground
h 6
0 kg
0
6-000
bars-3m
ground
h-6-en
8.500
10613108500
Sandvik Finemac
freecutting high carbon steel, leadfree
cold drawn, ground, polished
in 3m bars (+30/0 mm)
end of bars: pointed, chamfered
diam. 8.50 mm, tolerance ISO h7
bars 3m
ground
h 7
0 kg
0
8-500
bars-3m
ground
h-7-en
3.500
106129035001
Sandvik Finemac
freecutting high carbon steel, leadfree
cold drawn, ground, polished
in 2m bars (+30/0 mm)
end of bars: pointed, chamfered
diam. 3.50 mm, tolerance ISO h5
bars 2m
ground
h 5
0 kg
0
3-500
bars-2m
ground
h-5-en
0.500
106020005001
Finemac
no 1.1268, ~AISI 1095
freecutting high carbon steel
powder melted
cold drawn, tensile Rm 850-1000 MPa
in 3m bars +/-10mm
diam. 0.50 mm, tolerance ISO h6
bars 2m
drawn
h 6
0 kg
0
0-500
bars-2m
drawn
h-6-en
1.000
106020010001
Finemac
no 1.1268, ~AISI 1095
freecutting high carbon steel
powder melted
cold drawn, tensile Rm 850-1000 MPa
in 3m bars +/-10mm
diam. 1.00 mm, tolerance ISO h6
bars 2m
drawn
h 6
0 kg
0
1-000
bars-2m
drawn
h-6-en
0.402
10600800402
Finemac
no 1.1268, ~AISI 1095
freecutting high carbon steel
cold drawn, tensile Rm 850-1000 MPa
on spools SH390
diam. 0.402 mm, tolerance ISO h6
in spools
drawn
spec.
0 kg
0
0-402
in-spools
drawn
spec-en
11.000
106139110001
Sandvik Finemac
freecutting high carbon steel, leadfree
for watch industry, RoHS, Reach conforme
cold drawn, ground, polished, stress relieved
in 3m bars (+40/0 mm)
end of bars: pointed, chamfered
100% eddycurrent crack tested cl. 4
diam. 11.00 mm, tolerance ISO 286-2/h5
bars 3m
ground
h 5
606 kg
0
271 026 - 606.000
11-000
bars-3m
ground
h-5-en
10.000
10613910000
Sandvik Finemac
freecutting high carbon steel, leadfree
high grade watch steel, RoHS, Reach conforme
cold drawn, ground, polished
in 3m bars (+40/0 mm)
end of bars: pointed, chamfered
diam. 10.00 mm, tolerance ISO h5
bars 3m
ground
h 5
389 kg
800
190 826 - 385.046|240 226 - 3.500
10-000
bars-3m
ground
h-5-en
8.000
10613008000
Sandvik Finemac
freecutting high carbon steel, leadfree
cold drawn, ground, polished
in 3m bars (+30/0 mm)
end of bars: pointed, chamfered
diam. 8.00 mm, tolerance ISO h6
bars 3m
ground
h 6
0 kg
0
8-000
bars-3m
ground
h-6-en
7.500
10613907500
Sandvik Finemac
freecutting high carbon steel, leadfree
cold drawn, ground, polished
in 3m bars (+30/0 mm)
end of bars: pointed, chamfered
diam. 7.50 mm, tolerance ISO h5
bars 3m
ground
h 5
41 kg
0
201 125 - 41.000
7-500
bars-3m
ground
h-5-en
12.000
10613912000
Sandvik Finemac
freecutting high carbon steel, leadfree
for watch industry, RoHS, Reach conforme
cold drawn, ground, polished, stress relieved
in 3m bars (+40/0 mm)
end of bars: pointed, chamfered
100% eddycurrent crack tested cl. 4
diam. 12.00 mm, tolerance ISO 286-2/h5
bars 3m
ground
h 5
259 kg
500
190 826 - 258.800
12-000
bars-3m
ground
h-5-en
2.100
10600302100
Finemac
no 1.1268, ~AISI 1095
freecutting high carbon steel
precisely cold drawn,
on coils of 20-25kg
diam. 2.10 mm, tolerance ISO h6
in spools
drawn
h 9
0 kg
500
2-100
in-spools
drawn
h-9-en
1.700
10600301700
Finemac
no 1.1268, ~AISI 1095
freecutting high carbon steel
precisely cold drawn,
on coils of 20-25kg
diam. 1.70 mm, tolerance ISO h6
in spools
drawn
h 9
0 kg
500
1-700
in-spools
drawn
h-9-en
2.000
106139020001
Short description
Klein designation:
Finemac
Metal class:
lead-free, hardenable, free-cutting carbon steel
Material number:
(Material No. 1.1268)
UNS standard:
No UNS designation
RoHS 2 – 2011/65/EU:
Generally suitable for RoHS-compliant applications, as the material is lead-free; formal confirmation of compliance should be provided for each specific batch.
Machinability:
Very consistent machinability and long tool life
Hardenability:
Very good; wide temperature and time range during hardening, high hardness and a low risk of rejects. A hardness of approximately 850 HV5 is achieved after quenching.
Formability:
Good; particularly suitable for long, slender precision components with tight tolerances
Cold forming:
Very good; in particular, excellent cold-heading properties
Polishability:
Good; the material is available in ground and polished condition.
Magnetism:
Magnetic or ferromagnetic
Corrosion resistance:
Poor; not corrosion-resistant
Applications:
Finemac™ is primarily used for high-precision machined small components in precision engineering. Its main field of application is the watchmaking industry, particularly rotationally symmetrical components for mechanical watch movements.
Finemac
no 1.1268, ~AISI 1095
freecutting high carbon steel
precisely cold drawn,
on coils of 20-25kg
diam. 2.50 mm, tolerance ISO fg7
in spools
drawn
fg 7
0 kg
0
2-500
in-spools
drawn
fg-7-en
2.200
106139022001
Finemac
freecutting high carbon steel, RoHS conform
cold drawn, ground, polished, stress relieved
in 3m bars (+30/0 mm)
end of bars: pointed, chamfered,
eddycurrent crack tested cl. 4
diam. 2.20 mm, tolerance ISO 286-2/h5
bars 3m
ground
h 5
0 kg
0
2-200
bars-3m
ground
h-5-en
2.800
106139028001
Finemac
freecutting high carbon steel, RoHS conform
cold drawn, ground, polished, stress relieved
in 3m bars (+30/0 mm)
end of bars: pointed, chamfered,
eddycurrent crack tested cl. 4
diam. 2.80 mm, tolerance ISO 286-2/h5
