satisfactory in the hardened polished
and passivized condition
Magnetism:
magnetic
Uses:
medical, surgical and dental
instruments
Special features and main characteristics: Hardenable, corrosion-resistant steel with high wear resistance and adequate cutting hardness. Due to its higher carbon content, it surpasses Chronifer Labor M-13 in terms of cutting strength due to increased hardness acceptance. However, machinability is greatly restricted. Conversely, corrosion resistance to water and steam is excellent. The consistently applied ESU process increases the steel’s purity and homogeneity, thus enhancing the corrosion resistance of this high-quality steel.
Application and intended use: Cutting tools and highly wear-resistant parts in the medical and dental industry. The chemical analysis is approximately in line with the instrument standard ASTM F-899 (except for the Mo content, which is higher in Chronifer M-17B and therefore positively affects corrosion resistance).
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI 440C
as per DIN EN 10088-3
hardenable stainless steel
drawn and ground, in 3m bars (+30/0mm)
pointed/chamfered, eddy current tested
diam. 9.50 mm, tolerance ISO h7
bars 3m
ground
h 7
196 kg
0
100 702 - 195.500
9-500
bars-3m
ground
h-7-en
3.000
46413003000
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI 440C
ESR remelted, as per DIN EN 10088-3
as per ASTM F-899 and QQ-S-763F
ASTM A276-08a, ASTM A959-09,AMS5630J
UNS S44004, AMST 5880C, SUS 440C
hardenable stainless steel
annealed, ground, polished,
in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% eddycurrent crack tested as per
DIN 10277, Tab. 1, class 4
diam. 3.00 mm, tolerance ISO h6
bars 3m
ground
h 6
715 kg
0
240 419 - 714.800
3-000
bars-3m
ground
h-6-en
3.200
46413003200
Chronifer M 17 C
German no 1.4125, X105CrMo17,
AISI 440C, as per DIN EN 10088-3
hardenable stainless steel
ESR remelted, drawn, annealed, ground,
in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% eddycurrent crack tested
diam. 3.20 mm, tolerance ISO h6
bars 3m
ground
h 6
357 kg
0
110 406 - 129.000|120 406 - 228.000
3-200
bars-3m
ground
h-6-en
3.500
46413203500
Chronifer M 17 C
no 1.4125, X105CrMo17, ~Aisi 440C
hardenable stainless steel
drawn and ground, in 3m bars
diam. 3.50 mm, tolerance ISO h8
bars 3m
ground
h 8
0 kg
0
0
3-500
bars-3m
ground
h-8-en
7.000
46413007000
Chronifer M 17 C
german.no.1.4125, X105CrMo17, SAE 51440C
as per DIN EN 10088-3 12/14
AISI 440C, QQ-S 763F, UNS S44004,
AMS 5880C, SAE 51440C, AMS5630J
ASTM F-899-20, NF S94-090, UNS S44004
ASTM A276/A276M, ASTM A959-16
ESR remelted, drawn, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested cl. 4
diam. 7.00 mm, tolerance ISO h6 (ISO 286-2)
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI/SUS 440C
as per ASTM F-899, NF S94 090
UNS S44004, AMS 5630J, AMS 5880C
QQ-S-763F, ASTM A276, ASTM A959,
as per DIN EN 10088-3, ESR remelted
hardenable stainless steel
annealed, ground, polished,
in 3m bars (+30/0mm)
end of bars: pointed and chamfered
100% eddycurrent crack tested cl.4
diam. 4.50 mm, tolerance ISO 286-2/h6
Chronifer M 17 C
W-Nr.1.4125, X105CrMo17, AISI 440C
chemical analyses as per
UNS S44004, NF S 94-090, ASTM A276
ASTM F-899, ASTM A959 AMS-QQ-S 763
SAE 51440C, AMS 5630J, AMS 5880C
as per DIN EN 10088-3, QQS 763F
hardenable stainless steel, RoHS conforme
ESR remelted, cleanliness as per K1
annealed, ground, polished in 3m bars (+30/0mm)
pointed,chamfered end of bars
100% eddy current crack tested cl., 4
diam. 5.00 mm, tolerance ISO h6
Chronifer M 17 C
W-Nr.1.4125, X105CrMo17, AISI440C
as per DIN EN 10088-3 12/14
AMS QQ-S 763F, ASTM A276/A276M
ASTM F-899, NF S94 090, ASTMA959
UNS S44004,AMS 5630J,AMS5880C (chem)
as per EN 10088-3, ESR remelted
hardenable stainless steel
annealed, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% eddy current crack tested cl. 4
diam. 7.60 mm, tolerance ISO h6
Chronifer M 17 C
no 1.4125, X105CrMo17, Aisi 440C
hardenable stainless steel
as per EN 10088-3, ESR remelted
drawn, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% eddycurrent crack tested
diam. 4.30 mm, tolerance ISO h6
Chronifer M 17 C
mat.no.1.4125, X105CrMo17, AISI 440C
as per EN 10088-3 12/14, UNS S44004
NF S 94-090, ASTM A276, ASTM F-899
ASTM A959 AMS-QQ-S 763F
SAE 51440C, AMS 5630J, AMS 5880C
hardenable stainless steel
ESR remelted, annealed, ground,polished
in 3m bars (+30/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested
diam. 6.00 mm, tolerance ISO h6
bars 3m
ground
h 6
1250 kg
0
300 120 - 995.800|290 120 - 320.800
6-000
bars-3m
ground
h-6-en
15.000
46413315000
Chronifer M 17 C
mat.no.1.4125, X105CrMo17, EN10088-3
AISI 440C, ASTM F-899-12b, AMS 5880 Rev.E,
AMS 5630 Rev. L, ASTM A580/580M-18
ASTM A276/A276M-17, AMS QQS-763F,
hardenable stainless steel bearing quality
precision ground, in 3m bars (+30/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested
ultrasonic inspected as per AMS 2630A, Rev. C
diam. 15.00 mm, tolerance ISO h9
bars 3m
ground
h 9
916 kg
0
250 319 - 835.000|260 319 - 81.300
15-000
bars-3m
ground
h-9-en
17.700
46413317700
Chronifer M 17 C
no 1.4125, X105CrMo17, ~Aisi 440C
hardenable stainless steel
drawn and ground, in 3m bars
pointed/chamfered, eddy current tested
diam. 17.70 mm, tolerance ISO h9
bars 3m
ground
h 9
269 kg
0
290 903 - 269.000
17-700
bars-3m
ground
h-9-en
16.700
46413316700
Chronifer M 17 C
no 1.4125, X105CrMo17, ~AISI 440C
hardenable stainless steel
drawn and ground, in 3m bars
pointed/chamfered, eddy current tested
diam. 16.70 mm, tolerance ISO h9
bars 3m
ground
h 9
157 kg
0
031 003 - 157.200
16-700
bars-3m
ground
h-9-en
25.000
46413325000
Chronifer M 17 C
no 1.4125, X105CrMo17, Aisi 440C
hardenable stainless steel
drawn and ground, in 3m bars
pointed/chamfered, eddy current tested
diam. 25.00 mm, tolerance ISO h9
bars 3m
ground
h 9
2 kg
0
300 903 - 2.400
25-000
bars-3m
ground
h-9-en
10.200
46413310200
Chronifer M 17 C
no 1.4125, X105CrMo17, ~AISI 440C
hardenable stainless steel
annealed, ground, in 3m bars
pointed/chamfered, eddy current tested
diam. 10.20 mm, tolerance ISO h9
bars 3m
ground
h 9
41 kg
0
031 003 - 41.200
10-200
bars-3m
ground
h-9-en
3.700
46413303700
Chronifer M 17 C
no 1.4125, X105CrMo17, ~Aisi 440C
hardenable stainless steel
drawn and ground, in 3m bars
pointed/chamfered, eddy current tested
diam. 3.70 mm, tolerance ISO h9
bars 3m
ground
h 9
54 kg
0
031 003 - 53.500
3-700
bars-3m
ground
h-9-en
17.000
46413117000
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI 440C
as per DIN EN 10088-3, UNS S44004,
ASTM F-899, NF S 94-090
ASTM A276, ASTM A959
hardenable stainless steel
drawn, ground, in 3m bars
pointed/chamfered, eddy current tested
diam. 17.00 mm, tolerance ISO h7
bars 3m
ground
h 7
403 kg
0
011 003 - 6.300|010 305 - 3.800|020 305 - 392.400
17-000
bars-3m
ground
h-7-en
8.200
46413108200
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI 440C
as per DIN EN 10088-3
hardenable stainless steel
drawn, ground and polished
in 3m bars (+30/0mm)
pointed and chamfered ends
eddy current crack tested
diam. 8.20 mm, tolerance ISO h7
bars 3m
ground
h 7
22 kg
0
220 305 - 22.400
8-200
bars-3m
ground
h-7-en
8.500
46413108500
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI 440C
as per EN 10088-3
hardenable stainless steel
drawn and ground, in 3m bars
pointed/chamfered, eddy current tested
diam. 8.50 mm, tolerance ISO h7
bars 3m
ground
h 7
178 kg
0
290 301 - 177.700
8-500
bars-3m
ground
h-7-en
8.500
46413008500
Chronifer M 17 C
mat.no.1.4125,X105CrMo17,AISI/SUS440C
as per DIN EN 10088-3, QQS-763F
NF S94 090, ASTM F-899, UNS S44004
ASTM A276-08a,ASTM A959, AMS 5630J
AMS 5880C, QQ-S-763, SAE 51440C
hardenable stainless steel
ESR remelted,annealed, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested class 4
diam. 8.50 mm, tolerance ISO 286-2/h6
Chronifer M 17 C
W-Nr.1.4125, X105CrMo17,
as per DIN EN 10088-3, NF S94 090
chem. Analyse: ASTM F-899, AISI 440C,
QQ-S-763F, UNS S44004, ASTM A276-08
ASTM A959-09, SAE 51440C,
AMS 5630J, AMS 5880C, SUS 440C
hardenable stainless steel. ESR remelted
RoHS, Reach conforme
annealed, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested cl. 4
diam. 9.00 mm, tolerance ISO h6
bars 3m
ground
h 6
689 kg
0
270 415 - 6.000|030 320 - 682.900
9-000
bars-3m
ground
h-6-en
4.200
46413004200
Chronifer M 17 C
no 1.4125, X105CrMo17, Aisi 440C
as per DIN EN 10088-3
hardenable stainless steel
ESR remelted
annealed, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed chamfered
100% eddycurrent crack tested
diam. 4.20 mm, tolerance ISO h6
bars 3m
ground
h 6
292 kg
0
051 010 - 95.500|020 311 - 196.000
4-200
bars-3m
ground
h-6-en
25.000
46413025000
Chronifer M 17 C
mat.no1.4125, X105CrMo17, AISI 440C
as per DIN EN 10088-3, RoHS conforme
NF S94 090 (chem. Analysis)
Type 440C, UNS S44004, ASTM F-899
ASTM A276, A959, QQS 763F,
AMS 5630J, AMS 5880C, SUS 440C
hardenable stainless steel, ESR remelted,
annealed (condition A), ground, polished
in 3m bars (+50/0mm)
pointed/chamfered, eddy current tested
diam. 25.00 mm, tolerance ISO h7
Chronifer M 17 C
W-Nr.1.4125, X105CrMo17,
as per EN 10088-3 12/14, AISI/SUS 440C
UNS S44004, SAE 51440C, AMS 5630J
and NF S94 090, ASTM F-899-20
ASTM A276A, A959, AMS QQ-S-763F
hardenable stainless steel
as per Astm F-899, ESR remelted,
annealed, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested cl. 4
diam. 11.00 mm, tolerance ISO 286-2/h6
Chronifer M 17 C
mat..1.4125, X105CrMo17, AISI/SUS 440C
as per EN 10088-3, UNS S44004
AISI/SUS 440C, QQ-S 763F,
UNS44004,ASTM F-899-20, NF S94-090
ASTM A276/A276-17, A959-16
AMS 5880C, AMS5630L, SAE 51440C
hardenable stainless steel, ESR remelted
annealed, ground, polished RoHS conform
in 3m bars (+30/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested cl. 4
diam. 8.00 mm, tolerance ISO 286-2/h6
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI 440C
as per EN 10088-3 12/14, NF S94 090
chem only: ASTM F899-20,
ASTM A276/A276M, ASTM A959
QQS 763F, SUS 440C, NF S94 090
AMS 5630J, AMS 5880C, UNS S44004
hardenable stainless steel, ESR remelted
annealed, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested cl. 4
diam. 12.00 mm, tolerance ISO h6
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI 440C
as per DIN EN 10088-3, NF S94 090
UNS S44004, ASTM F-899, ASTM A276,
QQ-S-763F, SAE 51440C, AMS 5630J,
AMS 5880C, SUS 440C (chem.analyse)
hardenable stainless steel, ESR
drawn and ground, in 3m bars +30/0mm
end of bars: pointed/chamfered,
100% eddy current crack tested
diam. 7.10 mm, tolerance ISO h6
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI/SUS 440C
as per DIN EN 10088-3, UNS S44004
NF S94090, Chem: ASTM F-899-07
ASTM A276-08, A959-09, QQS763F
SAE5144C, AMS5630J, AMS5880C
hardenable stainless steel, ESR remelted
drawn and ground, polished
in 3m bars (+30/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested cl. 4
diam. 6.50 mm, tolerance ISO h6
bars 3m
ground
h 6
665 kg
0
271 119 - 472.300|281 119 - 192.400
6-500
bars-3m
ground
h-6-en
6.600
46413006600
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI 440C
as per DIN EN 10088-3 9/05
hardenable stainless steel
annealed, ground polished, in 3m bars
pointed/chamfered, eddy current tested
diam. 6.60 mm, tolerance ISO h6
bars 3m
ground
h 6
704 kg
0
150 306 - 704.200
6-600
bars-3m
ground
h-6-en
12.700
46413012700
Chronifer M 17 C
mat. 1.4125, X105CrMo17,AISI/SUS 440C
QQ-S 763F,ASTM F-899, NF S 94-090
EN 10088-3, ASTM A276-08a, A959-09
chemical: AMS 5630J, AMS 5880C
conforme EG/2002/95 ROHS directive
hardenable stainless steel, ESR remelted
annealed, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested
diam. 12.70 mm (1/2″), tolerance ISO h6
Chronifer M 17 C
mat. 1.4125,X105CrMo17,AISI/SUS440C
per DIN EN 10088-3 9/05, NFS94090
UNS S44004, ASTM F899-07, A276-08
ASTM A959-09, QQS-763F, SAE 51400C
AMS 5630J, AMS 5880C
hardenable stainless steel ESR remelted
drawn, ground, polished, in 3m bars
pointed and chamfered end of bars
100% eddy current crack tested cl.4
diam. 14.50 mm, tolerance ISO h6
bars 3m
ground
h 6
1041 kg
0
091 018 - 618.000|081 018 - 422.900
14-500
bars-3m
ground
h-6-en
6.350
46413006350
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI 440C
as per ASTM F-899, EN 10088-3
hardenable stainless steel
ESR remelted, RoHS conforme
annealed, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed and chamfered
eddy current crack tested
diam. 6.35 mm (1/4″), tolerance ISO h6
bars 3m
ground
h 6
226 kg
800
210 206 - 225.500
6-350
bars-3m
ground
h-6-en
3.500
46413003500
Chronifer M 17 C
no 1.4125, X105CrMo17, Aisi 440C
as per DIN EN 10088-3, AMS QQ S763F
AMS 5630, ASTM F-899, NF S94 090 (chem. only)
ESR remelted
hardenable stainless steel
annealed, ground, polished
in 3m bars (+30/0mm)
diam. 3.50 mm, tolerance ISO h6
Chronifer M 17 C
W-Nr.1.4125, X105CrMo17, AISI 440C
as per DIN EN 10088-3
AISI 440C, QQ-S 763F
ASTM F-899 and NF S 94-090
ASTM A276-08a, A959-09
hardenable stainless steel
ESR remelted, drawn, ground, polished,
in 3m bars (+30/0mm)
pointed and chamfered end of bars
100% eddycurrent crack tested
diam. 2.00 mm, tolerance ISO h6
bars 3m
ground
h 6
90 kg
800
280 109 - 0.736|200 213 - 88.900
2-000
bars-3m
ground
h-6-en
5.100
46413005100
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI 440C
EN 10088-3, NF S94 090, ASTM F-899
ASTM A276, A959, QQ-S-763F
hardenable stainless steel
ESR remelted, drawn, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested
diam. 5.10 mm, tolerance ISO h6
bars 3m
ground
h 6
1068 kg
0
061 211 - 190.400|230 413 - 878.000
5-100
bars-3m
ground
h-6-en
13.000
46413013000
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI 440C
as per DIN EN 10088-3, ASTM F-899
QQ-S-763F, cond. A, ESR remelted
AMS 5630J, AMS 5880C, SUS 440C
SAE 51440C, UNS S44004 (chem.Analy)
hardenable stainless steel
conform to ROHS directive
annealed, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested cl. 4
diam. 13.00 mm, tolerance ISO 286-2/h6
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI 440C
as per EN 10088-3 and ASTM F-899-20
ASTM A276/A276M, A959, NF S94 090
AMS 5630J, AMS5880C, UNS S44004
hardenable stainless steel, ESR
annealed, ground, polished,
in 3m bars (+50/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested cl. 4
ultrasonic inspected per EN 10308,Tab.1, Typ 1a
diam. 14.00 mm, tolerance ISO 286-2/h6
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI 440C
as per NF S94090, ASTM F-899
and DIN EN 10088-3 9/05
ASTM A276, A959, QQS 763F,
~AMS5880C ~SAE 51440C~UNSS44044,
~AMS 5630J~AMS 5880C~,~SUS 440C,
hardenable stainless steel,ESR remelted
annealed, ground, polished
in 3m bars (+40/0mm)
pointed/chamfered, eddy current tested
diam. 5.50 mm, tolerance ISO h6
Chronifer M 17 C
mat.no.4125, X105CrMo17,
AISI/SUS 440C, AMS 5630J
ASTM F-899, A276-08a, A959-09
QQS 763F, SAE 511440C, UNS S44004
AMS 5880C, NF S94 090,
as per DIN EN 10088-3 12/14
hardenable stainless steel, ESR remelted
annealed, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested
diam. 7.50 mm, tolerance ISO h6
bars 3m
ground
h 6
1130 kg
0
220 818 - 370.200|101 023 - 760.000
7-500
bars-3m
ground
h-6-en
10.000
46413010000
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI/SUS 440C
as per DIN EN 10088-3 12/14
UNS S44004 (chem. only), SAE 51440C
ASTM F-899-20 und NF S94 090, SAE 51440C
QQ-S-763, ASTM A276/A276M-17,ASTM A959
chemical: AMS 5630J, AMS 5880C
conforme EG/2002/95 ROHS directive
hardenable stainless steel, ESR remelted
annealed, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% eddy current crack tested class 4
diam. 10.00 mm, tolerance ISO 286-2/h6
bars 3m
ground
h 6
1848 kg
0
080 322 - 577.500|240 123 - 1270.700
10-000
bars-3m
ground
h-6-en
22.000
46413022000
Chronifer M 17 C
mat.1.4125, X105CrMo17, AISI/SUS 440C
as per DIN EN 10088-3, QQ-S 763F
UNS S44004, ASTM A276/A276M, ASTM A959
ASTM F899, AMS 5630J, AMS 5880C
hardenable stainless steel
annealed, ground, polished
in 3m bars (+50/0mm)
end of bars: pointed, chamfered
100% eddy current crack tested cl. 4
diam. 22.00 mm, tolerance ISO h6
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI 440C
as per EN 10088-3,
UNS S44004, NF S94-090, ASTM A276 (chem.)
hardenable stainless steel, ESR remelted
drawn and ground, in 3m bars (+30/0mm)
pointed/chamfered, eddy current tested
diam. 5.30 mm, tolerance ISO h6
bars 3m
ground
h 6
384 kg
0
250 907 - 8.700|190 416 - 375.500
5-300
bars-3m
ground
h-6-en
45.000
464113450001
Chronifer M 17 C
no 1.4125, X105CrMo17, ~Aisi 440C
hardenable stainless steel
ground, hardened/tempered
hardeness: approx. 54 HRC
in 1.10m bars
diam. 45.00 mm, tolerance ISO h9
special length
ground
h 9
34 kg
0
130 903 - 33.600
45-000
special-length
ground
h-9-en
8.200
46413008200
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI 440C
as per EN 10088-3
hardenable stainless steel
remelted ESR
annealed, ground polished
in 3m bars (+30/0mm)
end of bars: pointed/chamfered,
100% eddy current tested
diam. 8.20 mm, tolerance ISO h6
bars 3m
ground
h 6
340 kg
0
160 107 - 339.700
8-200
bars-3m
ground
h-6-en
16.000
46413016000
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI 440C
as per DIN EN 10088-3 9/05
ASTM F-899, QQ-S-763, cond. A
hardenable stainless steel, ESR
annealed, ground, polished,
in 3m bars (+40/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested
diam. 16.00 mm, tolerance ISO h6
Chronifer M 17 C
German no.1.4125, X105CrMo17, AISI 440C
DIN EN 10088-3, ASTM A959, ASTM A276
ASTM A580/A580M (chem. only), AMS QQS-763
gemäss ASTM F-899-20 and NF S94 090
hardenable stainless steel, RoHS conforme
ESR remelted, drawn and ground
in 3m bars (+30/0mm)
end of bars: pointed, chamfered,
100% eddycurrent crack tested cl. 4
diam. 3.30 mm, tolerance ISO 286-2/h6
bars 3m
ground
h 6
387 kg
0
170 424 - 386.800
3-300
bars-3m
ground
h-6-en
1.500
46400701500
Chronifer M 17 C
no 1.4125, X105CrMo17, ~AISI 440C
hardenable stainless steel
ESR remelted
drawn, annealed, polished, in coils
diam. 1.50 mm, tolerance ISO fg7
in spools
drawn
fg 7
118 kg
0
230 108 - 117.500
1-500
in-spools
drawn
fg-7-en
1.300
46400701300
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI 440C
as per DIN EN 10088-3
hardenable stainless steel
ESR remelted
drawn, annealed, polished, in coils
diam. 1.30 mm, tolerance ISO fg7
in spools
drawn
fg 7
0 kg
0
0
1-300
in-spools
drawn
fg-7-en
4.000
46413004000
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI 440C
as per DIN EN 10088-3, ASTM A276
QQ S 763F, NF S94 090, ASTMF-899-20
ASTM A580/A580M (chem.), ASTM A959
ESR remelted, hardenable stainless steel
annealed, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% eddycurrent-crack tested cl. 4
diam. 4.00 mm, tolerance ISO 286-2/h6
Chronifer M 17 C
German no.1.4125, X105CrMo17, AISI 440C,
as per ASTM F-899, NF S94 040, A959
AMS QQ-S-763F, SAE51440C, AMS5630J
AMS5880C, SUS 440C ASTM A276-08a
as per EN 10088-3 12/14, ESR remelted
hardenable stainless steel
annealed, ground, polished
in 3m bars (+50/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested
diam. 20.00 mm, tolerance ISO h6
bars 3m
ground
h 6
815 kg
0
271 020 - 814.600
20-000
bars-3m
ground
h-6-en
4.100
46413004100
Chronifer M 17 C
no 1.4125, X105CrMo17,
as per DIN EN 10088-3 12/14, AISI 440C,
QQ-S 763F, ASTM F-899-20 and NF S 94-090
ASTM A276/A276M/-17, ASTM A959-16
AMS 5630J, AMS 5880C, UNS S44004
hardenable stainless steel, ESR remelted
annealed ground, polished
in 3m bars (+30/0mm)
end of bars: pointed, chamfered,
100% eddycurrent crack tested cl. 4
diam. 4.10 mm, tolerance ISO h6
bars 3m
ground
h 6
1156 kg
0
270 721 - 293.500|131 223 - 862.000
4-100
bars-3m
ground
h-6-en
1.700
46400701700
Chronifer M 17 C
no 1.4125, X105CrMo17, Aisi 440C
W-Nr.1.4125, X105CrMo17, Aisi 440C
as per Astm F-899, NFS 94-040
as per QQS-763 Aisi 440C
hardenable stainless steel
cold drawn, in coils
diam. 1.70 mm, tolerance ISO fg7
in spools
drawn
fg 7
15 kg
0
110 595 - 15.200
1-700
in-spools
drawn
fg-7-en
19.000
46413019000
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI 440C
as per DIN EN 10088-3 9/05, ASTM A276-08
hardenable stainless steel, ESR remelted
annealed, ground, polished
in 3m bars (+50/0mm)
pointed/chamfered, eddy current crack tested
diam. 19.00 mm, tolerance ISO h7
bars 3m
ground
h 6
664 kg
0
030 608 - 664.200
19-000
bars-3m
ground
h-6-en
8.100
46413008100
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI 440C
as per DIN EN 10088-3, UNS S44044
ESR remelted, as per ASTM F-899
NF S94 090,ASTM A276, ASTM A959
QQS763F,SAE 51440C,AMS 5630J (chem)
hardenable stainless steel
annealed, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested
diam. 8.10 mm, tolerance ISO h6
bars 3m
ground
h 6
1061 kg
0
190 911 - 251.500|250 815 - 809.000
8-100
bars-3m
ground
h-6-en
3.100
46400503100
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI 440C
as per EN10088-3, ESR remelted
hardenable stainless steel
drawn, polished, in coils
diam. 3.10 mm, tolerance ISO fg8
in spools
drawn
fg 8
148 kg
0
110 712 - 147.900
3-100
in-spools
drawn
fg-8-en
1.800
46400701800
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI 440C
as per ASTM F-899, NF S94 040,
ASTM A959, ASTM A276 (chem. only)
ASTM A580/A580M, AMS QQS-763, ESU
hardenable stainless steel
cold drawn, polished, in coils
diam. 1.80 mm, tolerance ISO fg7
in spools
drawn
fg 7
246 kg
0
051 218 - 246.100
1-800
in-spools
drawn
fg-7-en
2.500
46400702500
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI 440C
as per ASTM F-899, NF S 94-040, QQS-763
ASTM 276 (chem. only), ASTM A959
hardenable stainless steel,ESR remelted
cold drawn, polished, in coils
diam. 2.50 mm, tolerance ISO fg7
in spools
drawn
fg 7
398 kg
0
070 819 - 397.700
2-500
in-spools
drawn
fg-7-en
38.100
46413838100
Chronifer M 17 C
AISI 440C, ~no 1.4125, X105CrMo17,
as per ASTM F-899-20, AMS 5618J
ASTM A276/A276M-23 (chem.)
QQS-S-763F (06/27/96), UNS S44004
AMS 5880 Rev E, DIN 10088-3, 1.4125
ASTM A580/A580M-23 (chem. only)
suivant EN 10088-3, 1.4125
ARC/AOD +VAR
hardenable stainless steel, bearing quality
annealed, ground, in 3m bars (+30/0mm)
end of bars: chamfered at both ends
ultrasonic inspected as per AMS 2630A Rev.E
diam. 38.10 mm (1 1/2″), 0/-0.066mm
bars 3m
ground
spec.
0 kg
2700
0
38-100
bars-3m
ground
spec-en
28.570
46413828570
Chronifer M 17 C
AISI 440C, ~no 1.4125, X105CrMo17,
as per ASTM A276-06, ASTM F-899
QQS-S-763F, AMS 5630 Rev L,
as per EN 10088-3 09/05
AMS 5880 Rev E, ASTM A580 (chem. only)
hardenable stainless steel, bearing quality ARC/AOD +VAR remelted
annealed, ground, in 3m bars (+30/0mm)
end of bars: chamfered at both ends
ultrasonic inspected as per AMS2630A, Rev.C
diam. 28.57 mm (1 1/8″), 0/-0.066 mm
bars 3m
ground
spec.
0 kg
2000
0
28-570
bars-3m
ground
spec-en
2.600
46413002600
Chronifer M 17 C
no 1.4125, X105CrMo17, ~Aisi 440C
hardenable stainless steel
drawn and ground, in 3m bars
pointed and chamfered end of bars
diam. 2.60 mm, tolerance ISO h6
bars 3m
ground
h 6
365 kg
0
150 512 - 365.100
2-600
bars-3m
ground
h-6-en
2.700
46400702700
Chronifer M 17 C
W-Nr.1.4125, X105CrMo17,
as per EN 10088-3, NF S94 090
AISI 440C, ASTM F-899,
and QQ-S-763, ASTM A959
UNS S44004, ASTM A580/A580M
hardenable stainless steel,ESR remelted
cold drawn, polished, in coils
diam. 2.70 mm, tolerance ISO fg7
in spools
drawn
fg 7
302 kg
0
290 812 - 301.700
2-700
in-spools
drawn
fg-7-en
25.400
46413325400
Chronifer M 17 C
Aisi 440C, ~W-Nr.1.4125, ~105CrMo17
AMS 5630 Rev.J, AMS 5880 Rev C
ASTM A276-06, Type 440C
AMS 5880 rev C, QQ S 763F,
ASTM A580-06 (chem.Analyse) F-899-09
annealed, ground, in 3m bars
end of bars: chamfered
diam. 25.40 mm, tolerance ISO h9
bars 3m
ground
h 9
769 kg
0
210 311 - 769.100
25-400
bars-3m
ground
h-9-en
52.000
46413352000
Chronifer M 17 C
~mat.1.4125, ~X105CrMo17, AISI 440C
bearing quality Co<0.10%) EN10088-3,
selon ASTM F-899-20, A276/276M-17,
AMS 5630 Rev. L, AMS 5618 Rev. J
AMS 5880 Rev.E, AMS QQ-S-763F
ASTM A580/580M-18 (chem.)
hardenable stainless steel (ARC/VAR)
annealed ground, in 3m bars (+30/0mm)
end of bars: chamfered
100% eddy current crack tested
ultrasonic inspected as
per AMS2630 Cl. AA Rev. D
diam. 52.00 mm, tolerance ISO h9
bars 3m
ground
h 9
1599 kg
0
211 221 - 187.600|250 823 - 1411.000
52-000
bars-3m
ground
h-9-en
1.300
46400801300
Chronifer M 17 C ARC/AOD
AISI 440C, ~no 1.4125,
as per AMS 5880, ASTM A580-08
hardenable stainless steel
hot drawn, annealed, on spools
dark surface (graphite layer)
diam. 1.30 mm, tolerance +/-0.0254 mm
in spools
drawn
spec.
0 kg
0
0
1-300
in-spools
drawn
spec-en
1.650
46400701650
Chronifer M 17 C
mat.no 1.4125, X105CrMo17, AISI 440C
EN 10088-3, ASTM F-899, NFS 94-040,
UNS S44004, AMS QQS-763
ASTM A580M/A580M, ASTM A959
ASTM A276 (chem. only),
hardenable stainless steel, ESR remelted
cold drawn, polished, in coils
diam. 1.65 mm, tolerance ISO fg7
in spools
drawn
fg 7
119 kg
0
040 512 - 118.800
1-650
in-spools
drawn
fg-7-en
21.000
46413021000
Chronifer M 17 C
W-Nr.1.4125, X105CrMo17
as per DIN EN 10088-3
AISI/SUS 440C, QQ-S 763F
UNS44004,ASTM F-899, NFS94-090
ASTM A276-08a, A959-09
AMS 5880C, AMS5630J
hardenable stainless steel,
ESR remelted,annealed, ground, polished
in 3m bars (+50/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested
diam. 21.00 mm, tolerance ISO h6
bars 3m
ground
h 6
665 kg
0
200 410 - 170.800|210 812 - 494.000
21-000
bars-3m
ground
h-6-en
1.900
46400801900
Chronifer M 17 C ARC/AOD
AISI 440C, ~no 1.4125,
as per AMS 5880, ASTM A580-08
and AMS 5630 Rev J 10/07
hardenable stainless steel
hot drawn, annealed, in coils
dark surface (graphite layer)
diam. 1.90 mm, +/-0.0254mm
in spools
drawn
spec.
884 kg
0
140 318 - 135.278|281 123 - 748.850
1-900
in-spools
drawn
spec-en
1.600
46400801600
Chronifer M 17 C
AISI 440C, ~no 1.4125,
as per AMS 5880, ASTM A580-08
hardenable stainless steel,
bearing quality ARC/AOD
hot drawn, annealed, on spools
dark surface (graphite layer)
diam. 1.60 mm, tolerance +/-0.0254 mm
in spools
drawn
spec.
283 kg
0
180 112 - 282.692
1-600
in-spools
drawn
spec-en
0.900
46400800900
Chronifer M 17 C ARC/AOD
AISI 440C, ~no 1.4125,
as per AMS 5880, ASTM A580-08
hardenable stainless steel
hot drawn, annealed, in coils
dark surface (graphite layer)
diam. 0.90 mm, tolerance +/-0.0254 mm
in spools
drawn
spec.
205 kg
544
250 811 - 204.988
0-900
in-spools
drawn
spec-en
1.800
46400801800
Chronifer M 17 C ARC/AOD
AISI 440C, ~no 1.4125,
as per AMS 5880, ASTM A580-08
and AMS 5630 Rev J 10/07
hardenable stainless steel
hot drawn, annealed, in coils
dark surface (graphite layer)
diam. 1.80 mm, tolerance +/-0.0254 mm
in spools
drawn
spec.
348 kg
0
180 112 - 107.500|310 518 - 240.000
1-800
in-spools
drawn
spec-en
1.500
46400801500
Chronifer M 17 C
AISI 440C ARC/AOD, ~German no 1.4125,
ASTM A580-08, AMS 5880 Rev C.
as per AMS 5630J,
hardenable stainless steel
hot drawn, annealed, on spools
dark surface (graphite layer)
diam. 1.50 mm, +/-0.0254mm
in spools
drawn
spec.
149 kg
0
180 112 - 149.000
1-500
in-spools
drawn
spec-en
30.000
46413330000
Chronifer M 17 C
Aisi 440C, ~no 1.4125, X105CrMo17,
bearing quality, ARC/AOD
hardenable stainless steel,
as per ASTM A276, ASTM F-899
QQS-S-763F, AMS 5630 Rev J,
AMS 5880 Rev C, ASTM A580
annealed, precision ground,
in 3m bars (+30/0mm)
chamfered at both ends,
100% eddycurrent crack tested
diam. 30.00 mm, ISO h9
bars 3m
ground
h 9
1568 kg
0
110 412 - 262.700|290 623 - 1305.000
30-000
bars-3m
ground
h-9-en
32.000
46413332000
Chronifer M 17 C
AISI 440C, ~no 1.4125, X105CrMo17,
bearing quality, ARC/VAR
hardenable stainless steel
as per ASTM A276-10, ASTM F-899-09
QQS-S-763F, AMS 5630 Rev J,
AMS 5880 Rev C, ASTM A580-08
annealed, precision ground,
in 3m bars (+30/0mm)
chamfered at both ends,
100% ultrasonic crack tested as per
AMS 2630 class A, Rev. C
diam. 32.00 mm, tolérance ISO h9
Chronifer M 17 C
no 1.4125, X105CrMo17, Aisi 440C
as per EN 10088-3, UNS S44004
and ASTM A276, NF S 94090 (chem.only)
ASTM F-899, ASTM A580/A580M
and AMS QQ-S-763, ESR remelted
hardenable stainless steel
cold drawn, polished, in coils
diam. 1.55 mm, tolerance ISO fg7
in spools
drawn
fg 7
194 kg
0
250 412 - 193.600
1-550
in-spools
drawn
fg-7-en
3.000
46400703000
Chronifer M 17 C
no 1.4125, X105CrMo17, Aisi 440C
as per Astm F-899, NFS 94-040, QQS-763
hardenable stainless steel,
ESR remelted
cold drawn, polished, in coils
diam. 3.00 mm, tolerance ISO fg7
in spools
drawn
fg 7
232 kg
0
050 811 - 232.100
3-000
in-spools
drawn
fg-7-en
6.100
46413006100
Chronifer M 17 C
mat.no. 1.4125, X105CrMo17, AISI 440C
as per EN 10088-3, NF S94 090
chem.Analyse: UNS S44004, ASTM F899
ASTM A276-08a, A959, QQS 763F
SAE 51440C, AMS5630J, AMS5880C
hardenable stainless steel, ESR
annealed, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested
diam. 6.10 mm, tolerance ISO h6
bars 3m
ground
h 6
660 kg
0
280 415 - 109.900|140 219 - 550.000
6-100
bars-3m
ground
h-6-en
2.300
46400702300
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI/SUS 440C
as per ASTM F-899, NFS 94-040,
AMS QQS-763, ASTM A959
hardenable stainless steel
ESR remelted
cold drawn, polished, in coils
diam. 2.30 mm, tolerance ISO fg7
in spools
drawn
fg 7
340 kg
0
101 018 - 339.600
2-300
in-spools
drawn
fg-7-en
2.000
46400702000
Chronifer M 17 C
W-Nr.1.4125, X105CrMo17, AISI 440C
gemäss ASTM F-899, NFS 94-040,
AMS QQ-S-763, ASTM A580/A580M,
ASTM A959, EN 10088-3
hardenable stainless steel
ESR remelted
cold drawn, polished, in coils
diam. 2.00 mm, tolerance ISO fg7
in spools
drawn
fg 7
513 kg
0
260 912 - 512.500
2-000
in-spools
drawn
fg-7-en
1.100
46400801100
Chronifer M 17 C ARC/AOD
AISI 440C, ~no 1.4125,
as per AMS 5880, ASTM A580
AMS 5630 mod. cond. Rev. L
hardenable stainless steel
hot drawn, annealed, in coils of 8-15kg
dark surface (graphite layer)
diam. 1.10 mm, tolerance +/-0.0254 mm
Chronifer M 17 C ARC/AOD
AISI 440C, ~no 1.4125, AMS 5630
as per AMS 5880, ASTM A580-08
hardenable stainless steel
hot drawn, annealed, in coils
dark surface (graphite layer)
diam. 2.10 mm, tolerance +/-0.0254 mm
in spools
drawn
spec.
234 kg
0
280 611 - 233.600
2-100
in-spools
drawn
spec-en
26.000
46413326000
Chronifer M 17 C
~mat.1.4125, X105CrMo17, AISI 440C
as per ASTM F-899, A276-10, AMS 5630
AMS 5880, ASTM A580-08 QQ-S-763F
hardenable stainless steel, (ARC/VAR)
annealed ground, in 3m bars (+30/0mm)
end of bars: chamfered
100% eddy current crack tested
diam. 26.00 mm, tolerance ISO h9
bars 3m
ground
h 9
164 kg
1261
080 611 - 163.500
26-000
bars-3m
ground
h-9-en
14.000
46413314000
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI 440C
hardenable stainless steel, ESR
as per EN 10088-3 and ASTM F-899
annealed, ground, polished, in 3m bars
end of bars: pointed/chamfered,
100% eddy current crack tested
diam. 14.00 mm, tolerance ISO h9
bars 3m
ground
h 9
0 kg
0
0
14-000
bars-3m
ground
h-9-en
35.000
46413335000
Chronifer M 17 C
AISI 440C, ~no 1.4125, X105CrMo17,
bearing quality, ASTM A276-08A,
QQS-S-763F, AMS 5630 Rev J, AMS 5880 Rev.C
ASTM A-580-08 (chem.), ASTM F-899-10
hardenable stainless steel
annealed, ground, in 3m (+30/0mm) bars
chamfered at both ends,
100% eddycurrent crack tested
diam. 35.00 mm, ISO h9
bars 3m
ground
h 9
1025 kg
0
080 212 - 295.900|270 313 - 729.000
35-000
bars-3m
ground
h-9-en
2.500
46413002500
Chronifer M 17 C
mat.no..1.4125, X105CrMo17
as per DIN EN 10088-3,UNS S44004,
AISI 440C,ASTM F-899,NF S 94-090
ASTM A276-08a, A959-09
AMS 5630J, AMS 5880C, SUS440C
SAE 51440C, AMS QQ-S 763F
hardenable stainless steel
ESR remelted, annealed,
ground, polished,in 3m bars (+30/0mm)
pointed and chamfered end of bars
eddycurrent crack tested
diam. 2.50 mm, +0.002/+0.008mm
Chronifer M 17 C
mat.no..1.4125, X105CrMo17
as per EN 10088-3,UNS S44004,AISI 440C,
ASTM F-899,NF S 94-090
ASTM A276-08a, A959-09
AMS 5630J, AMS 5880C, SUS440C
SAE 51440C, AMS QQ-S 763F
hardenable stainless steel
ESR remelted, annealed, ground, polished,
in 3m bars (+50/0mm)
pointed and chamfered end of bars
eddycurrent crack tested
diam. 24.00 mm, tolerance ISO h6
bars 3m
ground
h 6
1442 kg
0
140 512 - 371.719|300 321 - 1070.000
24-000
bars-3m
ground
h-6-en
1.800
46403301800
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI 440C
hardenable stainless steel
cold drawn, in 3m bars
diam. 1.80 mm, tolerance ISO h9
bars 3m
drawn
h 9
77 kg
0
310 518 - 77.200
1-800
bars-3m
drawn
h-9-en
45.000
46413845000
Chronifer M 17 C
AISI 440C, ARC/VAR
~W-Nr.1.4125, ~X105CrMo17,
hardenable stainless steel,
as per ASTM A276-10, ASTM F-899
QQS-S-763F, AMS 5630 Rev K, AMS 5880
ASTM A-580-12A (chemistry only)
annealed, ground, in 3m bars
chamfered at both ends,
100% eddycurrent crack tested
ultrasonic tested as per AMS 2630
diam. 45.00 mm, tolerance ISO h10
bars 3m
ground
spec.
464 kg
0
180 413 - 463.700
45-000
bars-3m
ground
spec-en
3.100
46413003100
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI 440C
as per DIN EN 10088-3, ASTM A276
QQ S 763F, NF S94 090, ASTMF-899
ASTM A580/A580M (chem.), ASTM A959
SAE 51440C, AMS 5630J, AMS 5880C
ESR remelted, hardenable stainless steel
cold drawn and ground, polished
in 3m bars (+30/0mm)
end of bars: pointed and chamfered
100% eddycurrent-crack tested
diam.3.10 mm, tolerance ISO h6
bars 3m
ground
h 6
445 kg
0
240 419 - 445.200
3-100
bars-3m
ground
h-6-en
23.000
46413023000
Chronifer M 17 C
mat.no1.4125, X105CrMo17, AISI 440C
as per DIN EN 10088-3 9/05
NF S94 090 (chem. Analysis)
Type 440C, UNS S44004, ASTM F-899
ASTM A276, A959, QQS 763F,
AMS 5630J, AMS 5880C, SUS 440C
hardenable stainless steel
ESR remelted,
annealed (condition A), ground, polished
in 3m bars (+50/0mm)
pointed/chamfered, eddy current tested
diam. 23.00 mm, tolerance ISO h7
bars 3m
ground
h 6
495 kg
0
121 113 - 494.800
23-000
bars-3m
ground
h-6-en
0.000
46400000000
Chronifer M 17 C
AISI 440C – Micro Melt
hardenable stainless steel
powder, ” Mesh + 140″
in ca. 5 kg plastic bottles
in spools
drawn
h 6
0 kg
0
0
0-000
in-spools
drawn
h-6-en
10.200
46413010200
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI/SUS 440C
as per DIN EN 10088-3. UNS S44004
as per ASTM F-899 and NF S94 090
and QQ-S-763, ASTM A276-08, A959
chemical: AMS 5630J, AMS 5880C
hardenable stainless steel, ESR remelted
annealed, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% eddy current crack tested
diam. 10.20 mm, tolerance ISO h6
bars 3m
ground
h 6
443 kg
0
110 614 - 443.400
10-200
bars-3m
ground
h-6-en
10.500
46413010500
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI/SUS 440C
as per DIN EN 10088-3. UNS S44004
as per ASTM F-899 and NF S94 090
and QQ-S-763, ASTM A276-08, A959
chemical: AMS 5630J, AMS 5880C
hardenable stainless steel, ESR remelted
annealed, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% eddy current crack tested cl. 4
diam. 10.50 mm, tolerance ISO h6
bars 3m
ground
h 6
236 kg
0
161 018 - 236.200
10-500
bars-3m
ground
h-6-en
4.760
46413004760
Chronifer M 17 C
no. 1.4125, X105CrMo17, AISI 440C
chemical analyses as per
UNS S44004, NF S 94-090, ASTM A276
ASTM F-899, ASTM A959 AMS-QQ-S 763
SAE 51440C, AMS 5630J, AMS 5880C
as per DIN EN 10088-3, QQS 763F
hardenable stainless steel,
ESR remelted, cleanliness as per K1
drawn ground, polished, in 3m bars (+30/0mm)
pointed,chamfered end of bars
100% eddy current crack tested
diam. 4.76 mm (3/16″), tolerance ISO 286-2/h6
bars 3m
ground
h 6
297 kg
0
080 714 - 296.800
4-760
bars-3m
ground
h-6-en
4.900
46413004900
Chronifer M 17 C
W-Nr.1.4125, X105CrMo17, AISI 440C
chemical analyses as per
UNS S44004, NF S 94-090, ASTM A276
ASTM F-899, ASTM A959 AMS-QQ-S 763
SAE 51440C, AMS 5630J, AMS 5880C
as per DIN EN 10088-3, QQS 763F
hardenable stainless steel,
ESR remelted, cleanliness as per K1
annealed, ground, polished in 3m bars
pointed,chamfered end of bars
100% eddy current crack tested
diam. 4.90 mm, tolerance ISO h6
bars 3m
ground
h 6
191 kg
0
071 014 - 190.900
4-900
bars-3m
ground
h-6-en
40.000
46413840000
Chronifer M 17 C
AISI 440C, ARC/VAR, EN10088-3
~W-Nr.1.4125, ~X105CrMo17, ASTM F-899-12b
ASTM A276-13A,Type 440C, AMS5880E
QQS-S-763F, AMS 5630 Rev L,
ASTM A580-13B (chemical only)
annealed, ground, in 3m bars +30/0mm
chamfered at both ends,
100% eddycurrent crack tested
ultrasonic tested as per AMS 2630A
diam. 40.00 mm, tolerance ISO h10
bars 3m
ground
spec.
518 kg
0
140 115 - 518.000
40-000
bars-3m
ground
spec-en
1.930
46400801930
Chronifer M 17 C
AISI 440C, ~no 1.4125, VAR remelted
hardenable stainless steel with extra
fine microstruture (for ballbarings)
annealed, in coils
diam. 1.93 mm, +/-0.0254mm
in spools
drawn
spec.
163 kg
0
310 315 - 163.431
1-930
in-spools
drawn
spec-en
9.600
46413009600
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI/SUS 440C
as per DIN EN 10088-3. UNS S44004
as per ASTM F-899-20 and NF S94 090
and QQ-S-763, ASTM A276/A286M, A959
chemical: AMS 5630J, AMS 5880C
hardenable stainless steel, ESR remelted
annealed, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% eddy current crack tested cl. 4
diam. 9.60 mm, tolerance ISO 286-2/h6
bars 3m
ground
h 6
661 kg
0
180 123 - 660.600
9-600
bars-3m
ground
h-6-en
1.650
46403101650
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI 440C
as per ASTM F-899, NFS 94-040,
EN 10088-3, AMS QQS-763
hardenable stainless steel
ESR remelted
cold drawn, polished, in 3m bars
diam. 1.65 mm, tolerance ISO h7
bars 3m
drawn
h 7
20 kg
0
040 512 - 19.900
1-650
bars-3m
drawn
h-7-en
1.400
46403001400
Chronifer M 17 C
AISI 440C, ~no 1.4125, gemäss
ASTM A580-08, AMS 5880 Rev C.
as per AMS 5630, AMS 5880,ASTM A580
hardenable stainless steel, ARC/AOD
hot drawn, annealed, redrawn
in straight length of 3m (+20/0mm
end of bars, pointed, chamfered
diam. 1.40 mm, tolerance ISO h6
bars 3m
drawn
h 6
17 kg
0
180 112 - 17.464
1-400
bars-3m
drawn
h-6-en
2.100
46413002100
Chronifer M 17 C
W-Nr.1.4125, X105CrMo17, AISI 440C
as per DIN EN 10088-3 12/14
AISI 440C, UNS S44004, QQ-S 763F, ESR
ASTM F-899 and NF S 94-090
ASTM A276-08a (chem. only)
ASTM A580/A580M, ASTM A959
hardenable stainless steel
drawn, annealed, ground, polished,
in 3m bars (+30/0mm)
end of bars: pointed and chamfered
100% eddycurrent crack tested class 4
diam. 2.10 mm, tolerance ISO h6
bars 3m
ground
h 6
256 kg
0
060 618 - 255.500
2-100
bars-3m
ground
h-6-en
1.200
46413001200
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI 440C
DIN EN 10088-3
hardenable stainless steel
drawn, ground, in 3m bars (+30/0mm)
diam. 1.20 mm, tolerance ISO h6
bars 3m
ground
h 6
28 kg
0
280 611 - 28.000
1-200
bars-3m
ground
h-6-en
2.300
46403102300
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI/SUS 440C
as per DIN EN 10088-3
as per ASTM F-899, NF S94 040,
AMS QQS-763, ASTM A959, ASTM A276
hardenable stainless steel, ESR remelted
cold drawn, annealed, in 3m bars +/-10mm
diam. 2.30 mm, tolerance ISO h7
bars 3m
drawn
h 7
47 kg
0
160 311 - 47.100
2-300
bars-3m
drawn
h-7-en
14.100
46413014100
Chronifer M 17 C
mat. 1.4125, X105CrMo17, AISI/SUS440C
per DIN EN 10088-3 12/14, NF S94 090
UNS S44004, ASTM F899-12b, A276/276M-17
ASTM A959-16, QQS-763F, SAE 51400C
AMS 5630L, AMS 5880C, UNS S44004
hardenable stainless steel ESR remelted
annealed, ground, polished, in 3m bars (+30/0mm)
pointed and chamfered end of bars
100% eddy current crack tested cl.4
diam. 14.50 mm, tolerance ISO h6
bars 3m
ground
h 6
426 kg
0
110 719 - 426.000
14-100
bars-3m
ground
h-6-en
1.500
46403101500
Chronifer M 17 C
no. 1.4125, X105CrMo17, ~Aisi 440C
hardenable stainless steel
ESR remelted
cold drawn, in 3m bars
diam. 1.50 mm, tolerance ISO h7
bars 3m
drawn
h 7
40 kg
0
230 108 - 40.100
1-500
bars-3m
drawn
h-7-en
1.400
46400801400
Chronifer M 17 C
ARC/AOD melted, bearing quality
AISI 440C, ~German no 1.4125,
as per AMS 5880 Rev. E, ASTM A580/A580M
and AMS 5630 mod. Rev L (04/13)
hardenable stainless steel, (> 60 HRC)
hot drawn, annealed, in coils of 9-19kg
dark surface (graphite layer)
diam. 1.40 mm, tolerance +/-0.0254 mm
in spools
drawn
spec.
539 kg
0
110 418 - 269.994|190 718 - 268.600
1-400
in-spools
drawn
spec-en
6.350
46413206350
Chronifer M 17 C
per ASTM A276/A276M, QQ-S-763F
ASTM A580-16 (chem.), ASTM F-899-12B
AMS 5880 Rev. E, AMS 5630 Rev. L
W-Nr.1.4125, X105CrMo17, AISI 440C
gemäss DIN EN 10088-3 12/14
hardenable stainless steel
bearing quality, RoHS conforme
annealed, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed and chamfered
eddy current crack tested, ultrasonic
inspected as per AMS 2630 Class A, Rev. C
diam. 6.35 mm (1/4″), tolerance ISO h8
bars 3m
ground
h 8
581 kg
0
280 818 - 464.152|120 619 - 117.000
6-350
bars-3m
ground
h-8-en
12.000
46413312000
Chronifer M 17 C
AISI/SUS 440C ARC/VAR,
QQ-S-763F, AMS5630 Rev. L, AMS 5618 Rev. J
ASTM F899-20, ASTM A276/A276M-17
AMS 5880E, ASTM A580/A580M-18 (chem.)
EN10088-3, W-Nr.1.4125, X105CrMo17,
hardenable stainless steel, bearing quality
annealed, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested
ultrasonic inspected per AMS2630A, Rev.C
diam. 12.00 mm, tolerance ISO h9
bars 3m
ground
h 9
661 kg
0
290 124 - 661.000
12-000
bars-3m
ground
h-9-en
10.000
46413310000
Chronifer M 17 C
AISI/SUS 440C ARC/VAR, QQ-S-763F,
ASTM F899-12B, ASTM A276/A276M-17
UNS S44004, AMS 5630 Rev. L
AMS 5880E, ASTM A580/A580M-18 (chem. only)
EN10088-3, W-Nr.1.4125, X105CrMo17,
hardenable stainless steel, bearing quality
annealed, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed, chamfered,
100% eddy current crack tested
ultrasonic inspected per AMS2630A, Rev.C
diam. 10.00 mm, tolerance ISO h9
bars 3m
ground
h 9
136 kg
0
260 219 - 135.900
10-000
bars-3m
ground
h-9-en
4.700
46413004700
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI 440C
as per DIN EN 10088-3
hardenable stainless steel
ESR remelted, RoHS conforme
drawn, annealed, ground, polished,
in 3m bars (+30/0mm)
pointed, chamfered end of bars
100% eddy current crack tested
diam. 4.70 mm, tolerance ISO 286-2/h6
Chronifer M 17 C
mat.no.1.4125,X105CrMo17,AISI/SUS440C
as per DIN EN 10088-3 12/14, AMS QQS-763F
NF S94 090, ASTM F-899, UNS S44004
ASTM A276-08a,ASTM A959, AMS 5630J
AMS 5880C, QQ-S-763, SAE 51440C
hardenable stainless steel
ESR remelted,annealed, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed/chamfered,
100% eddy current crack tested class 4
diam. 8.40 mm, tolerance ISO h6
bars 3m
ground
h 6
162 kg
0
150 519 - 162.000
8-400
bars-3m
ground
h-6-en
42.000
46413342000
Chronifer M 17 C
AISI 440C, no 1.4125, X105CrMo17,
bearing quality, ARC/VAR
hardenable stainless steel
as per ASTM A276/A276M-17, ASTM F-899-19
QQS-S-763F, AMS 5630 Rev J,
AMS 5880 Rev E, ASTM A580/A580M-18
annealed, precision ground,
in 3m bars (+30/0mm)
100% ultrasonic crack tested as per
AMS 2630 class A, Rev. D
diam. 42.00 mm, tolérance ISO h9
bars 3m
ground
h 9
1054 kg
0
231 120 - 1054.300
42-000
bars-3m
ground
h-9-en
2.700
46403102700
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI/SUS 440C
as per DIN EN 10088-3
as per ASTM F-899, NF S94-040,
AMS QQS-763, ASTM A959, ASTM A276
hardenable stainless steel, ESR remelted
cold drawn, annealed, in 3m bars +/-10mm
end of bars: pointed, chamfered
diam. 2.70 mm, tolerance ISO h7
bars 3m
drawn
h 7
0 kg
0
0
2-700
bars-3m
drawn
h-7-en
28.000
46413328000
Chronifer M 17 C
~mat.1.4125, X105CrMo17, AISI 440C
bearing quality Co<0.10%)
EN10088-3, 1.4125, ~X105CrMo17
selon ASTM F-899-20, A276/276M-17,
AMS 5630 Rev. L, AMS 5618 Rev. J
AMS 5880 Rev.E, AMS QQ-S-763F
ASTM A580/580M-18 (chem.)
hardenable stainless steel (ARC/VAR)
annealed ground, in 3m bars (+30/0mm)
end of bars: chamfered
100% eddy current crack tested
ultrasonic inspected as
per AMS2630 Cl. AA Rev. D
diam. 28.00 mm, tolerance ISO h9
bars 3m
ground
h 9
509 kg
636
200 422 - 453.500|280 422 - 55.000
28-000
bars-3m
ground
h-9-en
27.000
46413327000
Chronifer M 17 C
DIN EN 10088-3, W-Nr.1.4125, X105CrMo17
gemäss ASTM F-899-20, AMS 5630, AISI 440C
AMS 5880, ASTM A580/A580M-18, QQ-S-763F
ASTM 5618 Rev. J, AMS A276/A276M-17 (chem.)
hardenable stainless steel, bearing quality
annealed ground, in 3m bars (+30/0mm)
end of bars: chamfered
100% ultrasonic inspected per AMS 2630 Rev. J,cl.AA
diam. 27.00 mm, tolerance ISO h9
bars 3m
ground
h 9
614 kg
0
290 322 - 62.000|160 522 - 606.000
27-000
bars-3m
ground
h-9-en
48.000
46413348000
Chronifer M 17 C
~mat.1.4125, ~X105CrMo17, AISI 440C
bearing quality Co<0.10%) EN10088-3,
selon ASTM F-899-20, A276/276M-17,
AMS 5630 Rev. L, AMS 5618 Rev. J
AMS 5880 Rev.E, AMS QQ-S-763F
ASTM A580/580M-18 (chem.)
hardenable stainless steel (ARC/VAR)
annealed ground, in 3m bars (+30/0mm)
end of bars: chamfered
100% eddy current crack tested
ultrasonic inspected as
per AMS2630 Cl. AA Rev. D
diam. 48.00 mm, tolerance ISO h9
bars 3m
ground
h 9
565 kg
0
220 322 - 564.700
48-000
bars-3m
ground
h-9-en
1.900
46413801900
Chronifer M 17 C
no. 1.4125, X105CrMo17, AISI 440C
as per DIN EN 10088-3
AISI 440C, QQ-S 763F
ASTM F-899 und NF S 94-090
ASTM A276-08a, A959-09
hardenable stainless steel, ESR remelted
drawn, ground, polished, in 3m bars (+30/0mm)
pointed and chamfered end of bars
100% eddycurrent crack tested
diam. 1.90 mm, tolerance 0/+0.005 mm
bars 3m
ground
spec.
0 kg
0
0
1-900
bars-3m
ground
spec-en
2.750
46400202750
Chronifer M 17 C
W-Nr.1.4125, X105CrMo17,
as per EN 10088-3, NF S94 090
AISI 440C, ASTM F-899,
and QQ-S-763, ASTM A959
UNS S44004, ASTM A580/A580M
hardenable stainless steel,ESR remelted
cold drawn, polished, in coils
diam. 2.75 mm, tolerance ISO fg7
in spools
drawn
h 8
0 kg
0
0
2-750
in-spools
drawn
h-8-en
1.300
46403801300
Chronifer M 17 C ARC/AOD
AISI 440C, ~no 1.4125,
as per AMS 5880, ASTM A580-08
hardenable stainless steel
hot drawn, annealed, in 3m bars
dark surface (graphite layer)
diam. 1.30 mm, tolerance +/-0.0254 mm
bars 3m
drawn
spec.
0 kg
0
0
1-300
bars-3m
drawn
spec-en
11.000
464130110002
Chronifer M 17 C
AISI/SUS 440C ARC/VAR,
QQ-S-763F, AMS5630 Rev. L
ASTM F899-12B, ASTM A276/A276M-17
AMS 5880E, ASTM A580/A580M-18 (chem.)
EN10088-3, no. 1.4125, X105CrMo17
hardenable stainless steel, bearing quality
annealed, ground, polished
in 3m bars (+30/0mm)
end of bars: pointed, chamfered
100% eddy current crack tested
ultrasonic inspected per AMS2630A, Rev.C
diam. 11.00 mm, tolerance ISO h6
bars 3m
ground
h 6
310 kg
0
300 419 - 309.600
11-000
bars-3m
ground
h-6-en
5.200
46413005200
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI 440C
as per EN 10088-3,
UNS S44004, NF S94-090, ASTM A276 (chem.)
hardenable stainless steel, ESR remelted
drawn and ground, in 3m bars (+30/0mm)
pointed/chamfered, eddy current tested
diam. 5.20 mm, tolerance ISO h6
bars 3m
ground
h 6
0 kg
0
0
5-200
bars-3m
ground
h-6-en
1.900
46400701900
Chronifer M 17 C
no 1.4125, X105CrMo17, AISI 440C
as per ASTM F-899-20, NF S94 040,
ASTM A959, ASTM A276 (chem. only)
UNS S44004, ESR remelted
hardenable stainless steel
cold drawn, polished, in coils
diam. 1.90 mm, tolerance ISO286-2/fg7
in spools
drawn
fg 7
0 kg
300
0
1-900
in-spools
drawn
fg-7-en
18.000
46413118000
Brief description
Designation Klein:
CHRONIFER M-17 C
Class of metals:
Hardenable martensitic stainless steel
Material number:
1.4125
Standard EN:
X105CrMo17, AISI 440C
Re-melting:
ESR
Machinability:
up to satisfactory
Hardening capability:
up to 60 HRc
Polishing ability:
adapted for mirror polishing
Corrosion resistance:
satisfactory in the hardened polished
and passivized condition
Magnetism:
magnetic
Uses:
medical, surgical and dental
instruments
Special features and main characteristics: Hardenable, corrosion-resistant steel with high wear resistance and adequate cutting hardness. Due to its higher carbon content, it surpasses Chronifer Labor M-13 in terms of cutting strength due to increased hardness acceptance. However, machinability is greatly restricted. Conversely, corrosion resistance to water and steam is excellent. The consistently applied ESU process increases the steel’s purity and homogeneity, thus enhancing the corrosion resistance of this high-quality steel.
Application and intended use: Cutting tools and highly wear-resistant parts in the medical and dental industry. The chemical analysis is approximately in line with the instrument standard ASTM F-899 (except for the Mo content, which is higher in Chronifer M-17B and therefore positively affects corrosion resistance).
