This ARCAP AP1C nickel silver alloy is very well adapted for deep drawing and high precision stamping. It can be used for numerous diverse applications in many industrial branches. It is especially indicated for making precision springs.
ARCAP AP1 C
condition H 11 (1/4 hard)
non-ferrous alloy, corrosion resistant
cold drawn, in 3m bars (+50/0mm)
end of bars: pointed, chamfered
diam. 4.00 mm, tolerance ISO h9
bars 3m
drawn
h 9
0 kg
0
0
4-000
bars-3m
drawn
h-9-en
0.300
6142480302
ARCAP AP1 C 4/4 hard
non-ferrous alloy, corrosion resistant
cold rolled, in coils
0.30 x 21 mm
flat coils
rolled
spec.
0 kg
0
0
0-300
flat-coils
rolled
spec-en
0.100
6142480104
ARCAP AP1 C 1/4 hard
non-ferrous alloy, corrosion resistant
cold rolled, in coils
0.10 x 120 mm
flat coils
rolled
spec.
298 kg
0
201 099 - 298.050
0-100
flat-coils
rolled
spec-en
0.150
6142480155
ARCAP AP1 C 1/4 hard
non-ferrous alloy, corrosion resistant
cold rolled, in coils
0.15 x 120 mm
flat coils
rolled
spec.
3 kg
0
151 099 - 3.231
0-150
flat-coils
rolled
spec-en
25.000
61403325000
ARCAP AP1 C
non-ferrous nickel-silver alloy
cold drawn cond. H 14 (4/4 hard)
in 3m bars (+50/0mm)
round 25.00 mm, tolérance ISO h9
ARCAP AP1 C H 14 hard
non-ferrous nickel-silver alloy
cold drawn, condition H14 (4/4 hard)
in 3m bars (+50/0 mm)
end of bars: pointed, chamfered
100’% eddycurrent crack tested
round 12.00 mm, tolérance ISO h9
bars 3m
drawn
h 9
766 kg
0
200 917 - 217.300|160 421 - 555.000
12-000
bars-3m
drawn
h-9-en
0.300
6142480303
ARCAP AP1 C,
CuNi25Zn19Mn
non-ferrous alloy, corrosion resistant
cold rolled, 4/4 hard (H14)
HV 190 – 220, (Rm 620-710 MPa)
in coils
tolerance thickness +/-0.02 mm
0.30 x 50 mm (+0.30/0mm)
flat coils
rolled
spec.
93 kg
0
071 210 - 10.761|150 221 - 82.400
0-300
flat-coils
rolled
spec-en
4.000
6142680400
ARCAP AP 1 C
CuNi25Zn19Mn
non-ferrous alloy, corrosion resistant
cold rolled, 4/4 hard, in sheet
tol. thickness +/-0.1 mm
whide:tol. 0/+1 mm
4.00 x 200 x 1000 mm
in sheet
rolled
spec.
246 kg
0
260 615 - 246.100
4-000
in-sheet
rolled
spec-en
6.000
6142680600
ARCAP AP 1 C 4/4 hard
CuNi25Zn19Mn
non-ferrous alloy, corrosion resistant
cold rolled, in sheet
tol. thickness +/-0.016 mm
tol. square: 0/+1 mm
6.00 x 200 x 1000 mm
in sheet
rolled
spec.
173 kg
0
240 210 - 173.400
6-000
in-sheet
rolled
spec-en
1.000
61426801000
ARCAP AP 1 C H14
CuNi25Zn19Mn
non-ferrous alloy, corrosion resistant
cold rolled, in sheets, stress relieved
tensile strength Rm 620-710 MPa
hardness: HV 190-220, (4/4 hard)
tol. thickness +/-0.015 mm
width tolerance 0/+2 mm
1.00 x 300 x 1000 mm
in sheet
rolled
spec.
6 kg
0
290 611 - 5.860
1-000
in-sheet
rolled
spec-en
0.300
6142480306
ARCAP AP1 C 4/4 hard
HV 190 – 220, Rm 620-710 Mpa
non-ferrous alloy, corrosion resistant
cold rolled, in coils
thickness tol. +/-0.02
whide tol. : +0.3/-0
0.30 x 25 mm
flat coils
rolled
spec.
0 kg
0
0
0-300
flat-coils
rolled
spec-en
1.500
61426801500
ARCAP AP 1 C
CuNi25Zn19Mn
condition 4/4 hard (H34)
non-ferrous alloy, corrosion resistant
cold rolled sheet, stress relieved
tol. thickness +/-0.02mm
tol. width: 0/+1 mm
1.50 x 200 x 1000 mm
in sheet
rolled
spec.
0 kg
0
0
1-500
in-sheet
rolled
spec-en
15.000
61403315000
ARCAP AP1 C
non-ferrous nickel-silver alloy, unleaded
cold drawn, 4/4 hard (H14)
in bars of 3m length (+50/0mm)
end of bars: pointed/chamfered
round 15.00 mm, tolérance ISO h9
bars 3m
drawn
h 9
116 kg
0
221 021 - 171.700
15-000
bars-3m
drawn
h-9-en
13.000
61403313000
ARCAP AP1 C
non-ferrous nickel-silver alloy
cold drawn, 4/4 hard (H14)
in bars of 3m length (+50/0mm)
end of bars: pointed/chamfered
round 13.00 mm, tolérance ISO h9
bars 3m
drawn
h 9
375 kg
0
250 718 - 371.700|050 216 - 3.700
13-000
bars-3m
drawn
h-9-en
18.000
61403318000
ARCAP AP1 C
non-ferrous nickel-silver alloy
cold drawn, 4/4 hard (H14)
in bars of 3m length (+50/0mm)
end of bars: pointed/chamfered
round 18.00 mm, tolérance ISO h9
bars 3m
drawn
h 9
215 kg
0
080 316 - 215.000
18-000
bars-3m
drawn
h-9-en
11.000
61403311000
ARCAP AP1 C
CuNi25Zn19Mn
non-ferrous alloy, corrosion resistant
cold drawn, cond. H14 (4/4 hard)
in 3m bars (+50/0mm)
pointed, chamfered, eddycurrent crack tested
diam. 11.00 mm, tolerance ISO h9
bars 3m
drawn
h 9
320 kg
0
241 017 - 320.300
11-000
bars-3m
drawn
h-9-en
8.000
61413008000
ARCAP AP1 C
non-ferrous alloy, corrosion resistant
cold drawn, ground, cond. H14 (4/4 hard)
in 3m bars +50/0 mm
end of bars: pointed chamfered,
diam. 8.00 mm, tolerance ISO h6
bars 3m
ground
h 6
294 kg
0
050 719 - 1.000|230 323 - 295.500
8-000
bars-3m
ground
h-6-en
6.100
61403206100
ARCAP AP1C
CuNi25Zn19Mn
non-ferrous alloy, corrosion resistant
cold drawn, cond. H14 (4/4 hard)
in 3m bars +50/0 mm
end of bars: pointed chamfered,
diam. 6.10 mm, tolerance ISO h8
bars 3m
drawn
h 8
0 kg
0
0
6-100
bars-3m
drawn
h-8-en
6.000
61413006000
ARCAP AP1 C
CuNi25Zn19Mn
non-ferrous alloy, corrosion resistant
cold drawn, ground, cond. H14 (4/4 hard)
in 3m bars +50/0 mm
end of bars: pointed chamfered,
diam. 6.00 mm, tolerance ISO h6
bars 3m
ground
h 6
171 kg
0
201 218 - 173.700
6-000
bars-3m
ground
h-6-en
8.100
61403308100
ARCAP AP1 C
CuNi25Zn19Mn
non-ferrous alloy, corrosion resistant
cold drawn, cond. H14 (4/4 hard)
in 3m bars +50/0 mm
end of bars: pointed chamfered,
diam. 8.10 mm, tolerance ISO h9
bars 3m
drawn
h 9
0 kg
1300
0
8-100
bars-3m
drawn
h-9-en
30.500
61402330500
ARCAP AP1C
CuNi25Zn19Mn
unleaded, non-ferrous nickel-silver alloy
cold drawn, cond. H14 (4/4 hard)
in bars of 2m length (+50/0mm)
round 30.50 mm, tolerance ISO h9
bars 2m
drawn
h 9
0 kg
0
0
30-500
bars-2m
drawn
h-9-en
30.500
61403330500
ARCAP AP1 C
non-ferrous nickel-silver alloy
cold drawn, cond. H14 (4/4 hard)
in bars of 3m length (+50/0mm)
round 30.50 mm, tolerance ISO h9
bars 3m
drawn
h 9
0 kg
0
0
30-500
bars-3m
drawn
h-9-en
7.100
61403307100
ARCAP AP1 C
CuNi25Zn19Mn
non-ferrous alloy, corrosion resistant
cold drawn, cond. H14 (4/4 hard)
in 3m bars +50/0 mm
end of bars: pointed chamfered,
diam. 7.10 mm, tolerance ISO h9
bars 3m
drawn
h 9
0 kg
0
0
7-100
bars-3m
drawn
h-9-en
9.100
61403309100
ARCAP AP1 C
CuNi25Zn19Mn
non-ferrous alloy, corrosion resistant
cold drawn, cond. H14 (4/4 hard)
in 3m bars +50/0 mm
end of bars: pointed chamfered,
diam. 9.10 mm, tolerance ISO h9
bars 3m
drawn
h 9
0 kg
0
0
9-100
bars-3m
drawn
h-9-en
7.000
61413007000
ARCAP AP1 C
non-ferrous alloy, corrosion resistant
cold drawn, ground, cond. H14 (4/4 hard)
in 3m bars +50/0 mm
end of bars: pointed chamfered
diam. 7.00 mm, tolerance ISO h6
bars 3m
ground
h 6
376 kg
0
050 719 - 376.400
7-000
bars-3m
ground
h-6-en
30.000
61412030000
ARCAP AP1C
CuNi25Zn19Mn
non-ferrous nickel-silver alloy
cond. H14 (4/4 hard)
cold drawn, ground, in 2m bars
diam. 30.00 mm, tolerance ISO h6
bars 2m
ground
h 6
0 kg
0
0
30-000
bars-2m
ground
h-6-en
16.000
61403316000
ARCAP AP1 C
non-ferrous nickel-silver alloy
cold drawn, 4/4 hard (H14)
in bars of 3m length (+50/0mm)
end of bars: pointed/chamfered
round 16.00 mm, tolérance ISO h9
bars 3m
drawn
h 9
196 kg
0
221 021 - 195.700
16-000
bars-3m
drawn
h-9-en
2.000
61426802002
ARCAP AP 1 C
CuNi25Zn19Mn
non-ferrous alloy, corrosion resistant
cold rolled, sheet, 4/4 hard (H34)
stress relieved
tol. thickness +/-0.02mm
tol. width: 0/+1 mm
2.00 x 380 x 1000 mm
in sheet
rolled
spec.
135 kg
0
221 021 - 202.156
2-000
in-sheet
rolled
spec-en
1.500
614268015002
ARCAP AP 1 C
CuNi25Zn19Mn
condition 4/4 hard (H34)
non-ferrous alloy, corrosion resistant
cold rolled sheet, stress relieved
tol. thickness +/-0.02mm
tol. width: 0/+1 mm
1.50 x 380 x 1000 mm
in sheet
rolled
spec.
236 kg
0
200 923 - 235.840
1-500
in-sheet
rolled
spec-en
2.500
61426802500
ARCAP AP 1 C
CuNi25Zn19Mn
non-ferrous alloy, corrosion resistant
cold rolled, sheet, 4/4 hard (H34)
stress relieved
tol. thickness +/-0.02mm
tol. width: 0/+1 mm
2.50 x 380 x 1000 mm
in sheet
rolled
spec.
454 kg
0
070 823 - 454.000
2-500
in-sheet
rolled
spec-en
3.000
61426803000
ARCAP AP 1 C
CuNi25Zn19Mn
non-ferrous alloy, corrosion resistant
cold rolled, sheet, 4/4 hard (H34)
stress relieved
tol. thickness +/-0.03mm
tol. width: 0/+1 mm
flat 3.00 x 380 x 1000 mm
in sheet
rolled
spec.
235 kg
0
071 023 - 235.400
3-000
in-sheet
rolled
spec-en
1.000
614268010001
ARCAP AP 1 C
CuNi25Zn19Mn
condition 4/4 hard (H34)
non-ferrous alloy, corrosion resistant
cold rolled sheet, stress relieved
tol. thickness +/-0.02mm
tol. width: 0/+1 mm
flat 1.00 x 380 x 1000 mm
in sheet
rolled
spec.
482 kg
0
061 023 - 481.656
1-000
in-sheet
rolled
spec-en
1.500
613268015002
ARCAP AP 1 C spring quality
CuNi25Zn19Mn
non-ferrous alloy, corrosion resistant
cold rolled sheet, stress relieved (H35)
tol. thickness +/-0.02mm
tol. width: 0/+1 mm
1.50 x 380 x 1000 mm
in sheet
rolled
spec.
0 kg
0
0
1-500
in-sheet
rolled
spec-en
20.000
61443420000
ARCAP AP1 C
CuNi25Zn19Mn. (unleaded)
non-ferrous nickel-silver alloy,
cold drawn, cond. H14 (4/4 hard)
in bars of 3m length (+50/0mm)
square 20.00 mm, tolerance ISO h11
bars 3m
square
h 11
0 kg
0
0
20-000
bars-3m
square
h-11-en-2
22.000
61403322000
ARCAP AP1 C
CuNi25Zn19Mn. (unleaded)
non-ferrous nickel-silver alloy,
cold drawn, cond. H14 (4/4 hard)
in bars of 3m length (+50/0mm)
round 22.00 mm, tolerance ISO h9
bars 3m
drawn
h 9
0 kg
0
0
22-000
bars-3m
drawn
h-9-en
20.000
61403320000
Brief description
Klein designation:
ARCAP AP1 C
Class of steels:
CuNi25Zn16 – Nickel silver alloy for general uses
Material number:
ARCAP AP1C
Standard UNS:
RoHS 2 – 2011/65/EU:
Machinability:
Hardening capability:
Forming:
Cold working hardening:
Polishing ability:
Magnetism:
Corrosion resistance:
Uses:
This ARCAP AP1C nickel silver alloy is very well adapted for deep drawing and high precision stamping. It can be used for numerous diverse applications in many industrial branches. It is especially indicated for making precision springs.
The ARCAP AP1C spring material is available as strips, bars and wires for general industrial applications. This nickel silver alloy has a good corrosion resistance and is non-magnetic. The strips are especially well adapted to precision stamping with superior tool life.
